cast aluminium triangular 2 wheel brake sign, red background with raised aluminium letters. a nice period accessory, this part requires holes drilled for fixing. size 125mm tall x 127mm wide.
£18.50
|
cast aluminium triangular 4 wheel brake sign, (to brag about!) red background with raised aluminium letters. a nice period accessory, this part requires holes drilled for fixing. size 125mm tall x 127mm wide.
£18.50
|
reproduction AA Commercial cehicle members badge, from approx 1930 to 1967. chrome finish. offered with a black or red coloured background
£17.35
|
reproduction of AA badge as issued in 1920s' . we offer this Automobile Association badge in either polished brass or nickel plate finish. two mounting holes to base.
£41.50
|
reproduction of the first AA badge, brass only. this early Automobile Association badge carries the signature of the then secretary of the club, Stenson Cooke, and was first issued in May 1906. supplied undrilled.
£69.50
|
19mm diameter stainless steel bar, 560mm long -chrome on brass clips and legs. choice of straight or cranked can be offered (cranked is bent approx 20mm bend in centre), plug ends can be removed so item can be cut shorter if required. supplied as a unit with fastenings (bar, two mounting legs, four badge clips) .
£25.50
|
chrome on brass badge bar clip, two bolt fixing for standard 19mm round bar.
£4.00
|
badge bar clip, two bolt fixing for 25mm dia bar chrome on brass
£4.00
|
badge bar bracket, or can be used for small spotlamp. as Desmo 613 lamp clamp. suitable for 19mm but will fit 25mm bar. lamp hole 15.5mm dia.
£7.50
|
the full set of 8 fabulous reproductions of Brooklands badges. vitreous coloured enamels on to a brass base as original. the full set contains Brooklands School of Flying Ltd, Brooklands Aero Club, Brooklands Flying Club (nickel & gilt), Brooklands BARC, Brooklands 120MPH, Brooklands 130MPH and Brooklands Committee badges. two bolt holes to base for fixing to panel or fitting with badge bar clips. made by Toye, Kenning & Spencer in their Birmingham factory
£520.00
|
a fabulous reproduction of Brooklands 120MPH outer circuit record badge. vitreous coloured enamels on to a brass base as original. this Brooklands 120MPH Speed Award badge (black label) for achievement. the design shows two racing cars on the banked circuit passing under the bridge. two bolt holes to base for fixing to panel or fitting with badge bar clips.
£68.00
|
a fabulous reproduction of Brooklands 130MPH outer circuit record badge. vitreous coloured enamels on to a brass base as original. this Brooklands 130MPH Speed Award badge (red label) for achievement. the design shows two racing cars on the banked circuit passing under the bridge. two bolt holes to base for fixing to panel or fitting with badge bar clips.
£68.00
|
a fabulous reproduction of Brooklands Committee badge. vitreous coloured enamels on to a brass base as original. the design shows two racing cars on the banked circuit passing under the bridge. two bolt holes to base for fixing to panel or fitting with badge bar clips.
£65.00
|
a fabulous reproduction of Brooklands Flying Club badge. vitreous coloured enamels on to a brass base as original. the Brooklands Flying Club was formed in the 1930's. the design shows a single seat mono-plane flying directly over the Brooklands Flying Club building. (which remains today). this badge is available in gilt bronze finish or plated. two bolt holes to base for fixing to panel or fitting with badge bar clips.
£52.00
|
a fabulous reproduction of Brooklands School of Flying badge. vitreous coloured enamels on to a brass base as original. the Brooklands School of Flying was formed in the late 1920's, then in the 1930's the club was formed into a Limited Company - this badge is from that era. two bolt holes to base for fixing to panel or fitting with badge bar clips.
£65.00
|
oval cast F plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing.
£13.50
|
oval cast GB plaque with Humber oval mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 133mm. supplied undrilled for any fixing.
£18.75
|
oval cast GB plaque with Sunbeam oval mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 151mm. supplied undrilled for any fixing.
£25.15
|
oval cast GB plaque with Austin wings mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 148mm x 107mm. supplied undrilled for any fixing.
£16.75
|
oval cast GB plaque with Bentley B wings mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 155mm. supplied undrilled for any fixing.
£25.15
|
oval cast GB plaque with Riley diamond mark, with raised letters and rim, supplied unpainted, nice vintage pattern size 191mm x 133mm. supplied undrilled for any fixing.
£18.75
|
oval cast GB plaque with MG octagon badge inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 133mm. supplied undrilled for any fixing.
£18.75
|
oval cast GB plaque with RR (Rolls Royce) inset, raised letters and rim, supplied unpainted, nice vintage pattern size 190mm x 133mm. supplied undrilled for any fixing.
£18.75
|
oval cast D plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing.
£13.50
|
oval cast IRL plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing.
£13.50
|
oval cast NL plaque with raised letters and rim, supplied unpainted, nice vintage pattern size 140mm x 96mm. supplied undrilled for any fixing.
£13.50
|
stainless steel clamp brackets suitable for several uses when a plate need be fixed to a round tube. 1/4" (6mm) bolt, round bar size minimum of 19mm - maximum on 25mm diameter. offered in set of two complete units only. particularly suitable for rally plate, number plate etc.
£8.60
|
heavy gauge chromium plated brass letters approx 88mm tall x 62mm wide, as available in early post-war years. threaded studs to rear for fixing through panel. we offer these to suit a wide variety of country requirements - specify letters required GB, B, NL, DK, CH, F, E, P etc. price £11.00 EACH letter
£11.00
|
jewellers enamel badges, multi coloured, chrome backing approx 56mm x 35mm, supplied with two mounting bolts. stocked as under:
£6.30
|
chrome on brass GB letters 84mm high, each letter attached by 2 screws and nuts from behind.
£9.00
|
large cast aluminium plate with recessed letters, size 290mm x 170mm, copied from an original pattern. required holes drilling for fixing bolts.
£22.50
|
oval cast GB plaque with raised polished letters and rim, black background, nice vintage pattern that we have cast from an original. size 139mm x 92mm. fixed by drilling and blind tap thickened rib on rear. standard stock aluminium but also polished brass @ £19.80 and nickel or chromium plate @ £22.80 available
£16.80
|
GB plate in pressed alloy, black raised digits on white background. 178mm wide X 127mm high, two hole for mounting. traditional sign.
£10.60
|
cast aluminium GB plate. supplied with polished finish and recessed digits painted black. 178mm x 115mm. requires drilling for fixing.
£16.00
|
oval self adhesive GB sticker, black letter on white background.175mm x 117mm approx.
£3.50
|
traditional badge bar mounted badge depicting motor race circuits. all chrome finish with different colour backgrounds. the circuit shape is picked out in a different colour. we offer circuits: Brooklands, Brands Hatch, Donington Park, Silverstone, Oulton Park, Mallory Park, Snetterton, Thruxton and Goodwood
£17.35
|
reproduction of the Motor Union badge. we offer this badge in either polished brass or nickel plate finish (words Motor Union picked out in colour). no mounting holes drilled.
£52.95
|
reproduction of the first RAC (Royal Automobile Club) member's badge. the original was approved by King Edward Vll and first used in November 1907. it has the head of the King on one side (for the record, should be mounted with this side facing forward) and the rectangular enamel Union Jack on the reverse. offered in polished brass or nickel finish.
£53.00
|
reproduction RAC members badge with blue backing panel. chrome finish.
£23.25
|
self adhesive stick-on chrome GB letters 84mm tall.
£9.90
|
spot lamp mounting bracket, as Desmo part 613. chrome body, single mount bolt clamp for fitting to 19mm round bar. lamp mounting hole 15mm. overall size 63mm x 32mm.
£10.70
|
self-adhesive vinyl badges - approx 65mm x 40mm. sold in pairs (2 pieces)
£3.00
|
