-
pull bonnet catch from a Wilmot Breeden pattern as used as original equipment for Morris 8, Morgan etc. chrome on brass, approx 4.75" / 120mm long. complete with bonnet catch plate.
£19.20
-
small top quality catch, approx 4.25" / 110mm long overall, complete with catch plate, chromium plated on brass, small rubber buffer on back. base plate and catch plate same size (40mm x 19mm with hol
£19.20
-
large top quality catch approx 135mm overall complete with catch plate, chromium plated on brass. mountings approx 90mm apart
£23.75
-
'Ripaults' screw down bonnet catch, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall.
£37.20
-
small spring loaded pull catch with loop finger pull ring, painted finish, complete with pocket, approx 118mm long. chrome finger pull ring. hook for pocket approx 80mm from base.
£11.40
-
open spring bonnet catch, nickel plate finish, 125mm long, a cheap spring catch to hold a bonnet down, supplied with top catch.
£5.70
-
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
£12.80
-
bonnet/hood catch supplied with pocket. polished stainless steel parts, 91mm tall overall, base 55mm wide. choice of 2 hole mount (13mm deep) or 3 hole mount (30mm deep).
£12.80
-
'Ripaults' screw down bonnet catch, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall.
£37.20
-
'Ripaults' screw down bonnet catch, new manufacture, 4 mounting holes approx approx 28mm and 24mm apart vertically on 48mm round base, chromium top, approx 85mm tall.
£37.20
-
stainless steel bonnet catch with T bar grip pattern. 95mm long, two screw base (mount holes 35mm centres) mounts horizontally. supplied with zinc plated pocket.
£15.10
-
chrome plate bonnet catch as fitted to Morris Minor, MG, Wolseley Hornet etc. the catch has a kidney shape plate to allow movement. catch size 133mm overall.
£49.70
-
medium size basic type commercial type bonnet catch. 100mm overall high, supplied with bonnet catch pocket. supplied in primer paint finish only. base to pocket clip approx 90mm.
£11.50
-
chrome finish long tail lever pattern bonnet catch. sold in opposite pair sets only. push top down against spring to engage hook, turn through 90 degree to release. lever top 80mm long, angled two stu
£68.00
-
chrome finish on brass, tee shape twist handle fastener. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base approx 45mm diameter with four
£38.00
-
chrome finish on brass, tee shape twist handle fastener with 'R' embossed into top. push top down against spring to engage hook, turn through 90 degree to release. lever top 52mm long, angled base app
£38.00
-
chrome plate hook shape bonnet fastener with pocket. a traditional shape utility type catch. pocket and base mounting plate is zinc type plate finish. overall size approx 115mm (hook width 60mm).
£13.60
-
chrome plate hook shape bonnet fastener with pocket. a traditional shape utility type catch. pocket and base mounting plate is zinc type plate finish. overall size approx 115mm (hook width 60mm).
£13.60
-
bonnet catch pull and locating bracket of 'squashed tube' pattern offered by Ewarts. 113mm long. finger pull is shaped off the end of the tube. base 36mm x 24mm. bonnet clip base 31mm x 22mm. we offer
£19.60
-
small rubber hook with zinc plated bracket and clip. overall length approx 54mm. maximum extension from relaxed to tension not to exceed 10%.
£2.65
