medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles.
stock lengths:
3ft (910mm) - £27.40
£27.40
|
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm) pin
£145.20
|
folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm) pin 1
£110.70
|
heavyweight stainless folded type top bonnet hinge, 3/8" (10mm) brass pin, 16swg stainless steel flap folded towards pin, approx 45mm when open, 50mm knuckles, 54" (1.37m) long
£67.00
|
chrome on brass fitting. base 45mm x 15mm, mounting holes 31mm apart.
£9.00
|
chrome on brass fitting. base approx 45mm x 16mm, 28mm deep overall. mounting holes 31mm centres.
£9.00
|
chrome on brass fitting
£9.00
|
heavy bonnet hinge 3/8"/10mm diameter pin, 16 swg (1.6mm) flaps , 75mm across flaps when open, 51mm knuckles 5ft/ 1.52m long only. offered in brass flaps with stainless pin OR stainless flaps with bra
£87.10
|
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
£9.00
|
chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
£9.00
|
chrome on brass folded centre bonnet strip. 1270mm length (50") 21mm wide. side panels are folded and slide in place.
£39.60
|
chrome plate end cover and clamp for centre strip. base 51mm x 13mm, holes 35mm apart.
£13.90
|
folded steel side strip for sliding into bonnet strip, 48"/1.22 metre long. weld to flat panel. 25mm overall width (flange 14mm)
£27.55
|
