black felt strip, for use in window channels, between body and chassis etc. 1.85m lengths only.
38mm x 2mm thick
50mm x 3mm thick
50mm x 6mm thick
75mm x 3mm thick
£3.90
|
black felt strip, for use in window channels, between body and chassis etc. 1.85m lengths only.
38mm x 2mm thick
50mm x 3mm thick
50mm x 6mm thick
75mm x 3mm thick
£5.00
|
black felt strip, for use in window channels, between body and chassis etc. 1.85m lengths only.
38mm x 2mm thick
50mm x 3mm thick
50mm x 6mm thick
75mm x 3mm thick
£5.00
|
black felt strip, for use in window channels, between body and chassis etc. 1.85m lengths only.
38mm x 2mm thick
50mm x 3mm thick
50mm x 6mm thick
75mm x 3mm thick
£6.00
|
bumper over-rider bead, black plastic, approx 10mm wide base with 2mm slot.
£0.95
|
bumper over-rider bead, black PVC, approx 4.5mm diameter.
£0.85
|
wipe/seal for sliding windows, rigid carrier with fur on one outer edge to seal between passing windows. cut to specific length (units 0.10m). dimensions glass gap 6.25mm, overall 10.9mm deep x 17mm w
£8.25
|
velvet lined rubber, for 4.5mm glass, overall width 12mm x height 13mm. flexible channel.
£5.46
|
rigid aluminium channel (approx 14mm wide x 15mm deep) with black felt insert, for 6mm glass. available in cut lengths of 1metre, 1.5metre or 2metre only.
our part 263 velvet channel can be ordered s
£6.50
|
flexible metal single channel, felt/rubber/moquette lined, overall width approx 14mm, height 14mm. glass thickness 4.7mm to 6.4mm. black woven edge.
£5.56
|
stainless steel edged flexible metal channel suitable for 4.5mm to 6mm thick glass, outside dimensions approx 16mm wide x 15mm deep. suits Rover, Morris Traveller etc. available in 2760mm length only
£28.60
|
universal flexible rubber channel, flock finish inside, will suit 4.5mm or 6mm glass, and can be made to fit variations of holder, to fit nominal width 13mm channel
£2.52
|
velvet lined double width rubber, for 5mm glass, overall width 22mm x height 13mm. flexible channel.
£7.70
|
universal flexible rubber channel, flock finish inside, will suit 4.5mm or 6mm glass, and can be made to fit variations of holder, to fit nominal width 13mm channel
£2.52
|
velvet lined rubber, for 4.5mm glass, overall width 10mm x height 10mm. flexible channel. NO STOCK - awaiting new supply
£6.48
|
velvet lined rubber, for 6mm glass, overall width 14.5mm x height 13.5mm. flexible channel. NO STOCK - awaiting new delivery
£5.85
|
exterior weatherstrip, smaller version of our range, seals 10mm body/glass gap, 1 metre lengths only.
£5.25
|
weatherstrip for exterior or interior use. fitted between the door and the opening window glass. 17mm high, 5mm deep, with galvanised edge bead, one side plush fur pile finish. available in 2 metre le
£6.13
|
exterior weatherstrip, to fit the outside edge of opening window glass, rubber with felt face, metal stiffener strip, seals up to 11mm body/glass gap. 1 metre lengths only
£5.25
|
weatherstrip for exterior or interior use, fits between door and drop window glass, narrow version, 11.5mm high, 7mm thick. often used on early Ford, lengths available 8ft/2.44m at £13.98 or 4ft/1.21m
£13.98
|
early vintage weatherstrip which fits horizontally under door capping. black velvet covered rubber - specify lengths required (maximum in one piece 2 metres).
£6.75
|
leathercloth covered fender welt, stitched over plastic cord centre, black dull grained finish, approx 6mm diameter bead, 32mm flange
£2.60
|
leathercloth covered fender welt, stitched over plastic cord centre, dull grained finish, black only. approx 8mm diameter, 32mm flange, we can make other sizes of piping to order, minimum 10 metres,
£2.80
|
leathercloth covered fender welt, stitched over plastic cord centre, dull grained finish, approx 4mm diameter, 32mm flange, black only.
£2.38
|
leathercloth covered fender welt, stitched over plastic cord centre, dull grained finish approx 6mm diameter bead, 32mm flange - stocked in following colours - green, grey, blue, maroon, ivory, fawn,
£2.80
|
hollow bead black plastic piping. use between wing (fender) and body (fender welt), available in the following sizes
4mm bead x 25mm flange
6mm bead x 25mm flange
discounted
£1.30
|
hollow bead black plastic piping. use between wing (fender) and body (fender welt), available in the following sizes
4mm bead x 25mm flange
6mm bead x 25mm flange
discounted
£1.30
|
leathercloth covered fender welt, stitched over plastic cord centre, bright (shiny) patent-look finish, black only. -approx 6mm diameter bead, 32mm flange
£2.60
|
leathercloth covered fender welt, stitched over plastic cord centre, bright (shiny) patent-look finish, black only. approx 8mm diameter, 32mm flange
£2.80
|
leathercloth covered fender welt, stitched over plastic cord centre, bright (shiny) patent-look finish, black only. approx 4mm diameter, 32mm flange
£2.38
|
solid bead plastic, approx 6mm diameter 25mm flange, stocked in the following colours. blue, green, red and tan.
£1.55
|
half-round plastic T piping, 6mm wide bead, 16mm ribbed flange, stocked in black, white or silver grey.
£1.43
|
