heavy brass door hinge, undrilled flaps. 2 1/2" high x 4" wide (approx 63mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hing
£28.45
|
chrome plated boot or bonnet hinge with securing studs on rear to fit through panel. used on Lotus Elan, TVR. Hillman Imp, Reliant and kit cars. base 135mm x 22mm overall. three securing studs, suppli
£17.25
|
chrome plated hinge with securing studs on rear to fit through panel. used as original part on Morris Minor as boot hinge. base 212mm x 22mm overall. three securing studs, supplied with nuts. NOTE th
£42.00
|
chrome plated boot or bonnet hinge with securing studs on rear to fit through panel. used on Triumph TR4, Spitfire, Herald, Nash Metropolitan, Standard 8 & 10. base 123mm x 22mm overall. three securin
£36.75
|
chrome plated hinge with securing studs on rear to fit through panel. used as original part on Morris Minor 1951 onward as bonnet hinge. base 191mm x 26mm overall. four securing studs, supplied with n
£47.00
|
solid brass undrilled, steel pin, flap size 1 3/4" high x 4" long (approx 45mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of
£24.42
|
solid brass undrilled, steel pin, flap size 1 3/4" high x 2" wide (approx 45mm x 50mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hi
£19.42
|
solid brass undrilled, steel pin. flap size 1 1/2“ high x 2" wide (approx 38mm x 50mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hi
£18.60
|
solid brass undrilled, steel pin, flap size 1 1/2“ x 4". (approx 38mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hinge.
£22.70
|
solid brass undrilled, steel pin, flap size 2" high x 4" wide (approx 50mm x 100mm) when closed. 5 equal knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hinge
£25.58
|
solid brass undrilled, steel pin. flap size 1 1/8“ high x 2" wide (approx 28mm x 50mm) when closed. 3 knuckles, 1/2" (12.5mm) parallel sided for the pin, material thickness 5mm at open end of hinge.
£17.74
|
cast iron type van door hinge 80mm wide x 76mm tall. left hand and right hand available. (note illustration shows left hand part)
£12.80
|
cast iron type van door hinge 86mm wide x 85mm tall. left hand and right hand available. (note illustration shows left hand item)
£12.80
|
self aligning iron van door hinge 66mm tall x 57mm wide. left hand and right hand available. (note illustration shows right hand part). note that the weight of the door is always carried in the cup NO
£15.20
|
self aligning iron van door hinge 71mm high. left hand and right hand. overall 95mm wide.
mounting hole centres 50mm tall and 54mm wide.
2 PAIRS ONLY AVAILABLE - sold as one lot only
£66.00
|
self aligning iron van door hinge 112mm high. left hand and right hand. overall 110mm wide.
mounting hole centres 76mm tall and 54mm wide.
2 PAIRS ONLY AVAILABLE - sold as one lot only
£75.00
|
self aligning steel - self colour. flaps undrilled, size 2" x 5" (approx 50mm x 125mm) left hand and right hand. note the swinging part sits on ball which sits in the cup of the fixed part (note illu
£16.40
|
self aligning steel - self colour. flaps undrilled, size 1 1/2" 38mm(Pin) x 1 7/8" 49mm(Flap)LEFT hand ONLY. note the swinging part sits on ball which sits in the cup of the fixed part
£12.00
|
self aligning steel - self colour. flaps undrilled, size 1 3/4" (45mm) Pin x 4 1/2" (115mm) Flap. Left hand ONLY. note the swinging part sits on ball which sits in the cup of the fixed part.
£32.00
|
folded stainless steel hinge with double flaps, making a strong but lightweight hinge. 51mm tall, 45mm wide fully open, three holes each flap.
£8.50
|
