brass pressure pump for fule tank pressurisation etc. the tubular body has a flange (undrilled) for fixing unit on vehicle, T grip handle. supplied with solder type fittings for 1/4" or 5/16" (specify) copper pipe. the unit has an inbuilt non return valve to prevent back suction. body approx 260mm long x 40mm diameter.
£103.50
|
cylindrical fuel pump kit for competition use (with red top), delivering fuel at rate of up to 35 gallons per hour at a pressure of 6.0 to 7.25 psi (pounds per square inch) which can only be fitted to negative earth systems. can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. size 135mm x 50mm. thread 1/4" NPTF. kit comprises pump, 2 unions and 2 mounting rubbers.
£78.75
|
cylindrical fuel pump kit for fast road use (with silver top), delivering fuel at rate of up to 27 gallons per hour at a pressure of 5.0 to 6.0 psi (pounds per square inch) which can only be fitted to negative earth systems. can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. size 135mm x 50mm. thread 1/8" NPTF. kit comprises pump, 2 unions and 2 mounting rubbers.
£73.45
|
solid state fuel pump kit for fast road use, delivering fuel at rate of up to 18 gallons per hour at a pressure of 5.0 to 6.0 psi (pounds per square inch) which can be fitted to either positive or negative earth systems. must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. size 60mm x 48mm. thread 1/8" NPTF. kit comprises pump, 2 unions, spare filter and 2 mounting rubbers.
£45.90
|
cylindrical fuel pump kit for normal road use (with silver top), delivering fuel at rate of up to 18 gallons per hour at a pressure of 4.0 to 4.5 psi (pounds per square inch) which can only be fitted to negative earth systems. can be fitted anywhere into the fuel line, and will prime a dry fuel system to a height of 600mm. size 135mm x 50mm. thread 1/8" NPTF. kit comprises pump, 2 unions and 2 mounting rubbers.
£69.90
|
solid state fuel pump kit for normal road use, delivering fuel at rate of up to 12 gallons per hour at a pressure of 2.5 to 3.0 psi (pounds per square inch) which can be fitted to either positive or negative earth systems. must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. size 60mm x 48mm. thread 1/8" NPTF. kit comprises pump, 2 unions, spare filter and 2 mounting rubbers.
£44.40
|
solid state fuel pump kit for competition use, delivering fuel at rate of up to 25 gallons per hour at a pressure of 6.0 to 7.0 psi (pounds per square inch) which can be fitted to either positive or negative earth systems. must be fitted within 300mm of fuel tank, and will prime a dry fuel system to a height of 300mm. size 60mm x 48mm. thread 1/8" NPTF. kit comprises pump, 2 unions, spare filter and 2 mounting rubbers.
£48.20
|
some older vehicles may require a fuel pressure regulator (adjusts 1 to 5 psi) when using a Facet or Walbro pump.
£19.45
|
glass bowl in line fuel filter which has useful provision of being able to be supported by an additional bracket on to threaded portion if required to carry the weight. available for either 1/4'' or 5/16'' OD pipe. should you break the bowl replacements can be supplied. approx 115mm deep x 147mm long include pipe fittings.
£32.00
|
glass bowl in line fuel filter, with mounting bracket (hole centres approx 40mm centres), the detatchable glass bowl held by U bracket. (replacement glass bowls can be supplied if you break it). no fittings supplied.
£22.10
|
glass body in line fuel filter, approx 28mm diameter x 108mm long overall. as supplied require flexible hose on to fittings.
£4.65
|
original new old stock Kigas hand primer fuel pump. supplied as shown.
£95.00
|
larger Kigas fuel priming pump, new old stock so will show some signs of storage. operated by 90mm wide T handle. flange screws onto dashboard.
£110.00
|
small glass bowl filter for the smaller vehicle. 1/4" BSP thread on connections. on/off tap lever to side. limited availability.
£22.50
|
twin point rocker assembly and blade (points) for SU fuel pumps.
£11.80
|
aluminium bodied fuel pump, delivering fuel at rate of up to 18 gallons per hour at a pressure of 3.5 to 4.0 psi (pounds per square inch) which can only be fitted to negative earth systems. can be fitted anywhere into the fuel line. thread 1/8" NPTF. can be fitted also to motorcyles (carburated) to 120BHP
£52.10
|
