-
angled wing mounting stop/tail lamp, as supplied by the ford motor co. for fitting to the E93A Prefect 1939 - 1948. supplied as a "ready to fit" lamp along with template for hole drilling, 61mm x 149
£103.25
-
small metal covered lamp with opaque plastic lens for varios applications. base 70mm x 33mm, t screw fixings 51mm apart. lamp body protrudes approx 25mm
£6.80
-
diver's helmet tail lamp. 5 cm lens diam and overall diameter about 9cm. similar to the old CAV, Rotax and Lucas models. sold in pairs, these superb lamps are available in either polished brass, brigh
£345.00
-
round rear lamp with split amber/red glass lens. polished stainless steel 97mm diameter x 51mm deep. two single contact bulbholders fitted through back. all red lens available as alternative. also cho
£26.00
-
remanufactured reverse / number plate lamp of Lucas L469 pattern. chrome on brass with frosted main lens. 163mm x 40mm x 60mm deep. two mounting bolts to rear 77mm centres
£82.00
-
stainless steel cover for rear of doulamp type lamp
£6.80
-
stainless steel cover for rear of doulamp type lamp
£6.80
-
remanufactured rear lamp as Lucas type L494 part. chrome finish on cast body with chrome plated fittings. offered with either clear glass lens (for reverse) OR red glass lens (for rear/rear fog light)
£35.00
-
licence plate/number plate bracket which bolts under rear lamp. available in polished stainless steel or black enamel finish
£11.25
-
number plate lamp fitted with 12volt bulb, black finish dimensions 98mm long, 55mm wide and 50mm tall. 45mm mounting bolt centres. cover held by two slotted raised head countersunk screws.
£27.50
-
as Lucas model 467 as fitted to numerous vehicles. base 112mm x
49mm x 45mm high, available chrome or black on brass cover, clear side lens.
£21.70
-
early pattern cylindrical rear lamp with side number plate illumination, as Lucas type 582. fitted with prismatic glass lens and metal rim. 45mm dia x 93mm overall, body 42mm dia. choice of finish - b
£39.50
-
a useful rear lamp, which we would refer to as 'Miller type' lamp. used on motorcycles, but offering useful applications as additional number plate illumination etc. the prismatic red lens (32mm diame
£19.75
-
"Owl Eye" Rear lamp, reproduction from our own tooling of Lucas type 312 lamp, chrome plated finish on brass pressings, supplied with red with white or amber (as shown) main lenses. number plate illum
£313.20
-
single red lens duolamp, stainless steel rim 97mm diam, black body 60mm deep. one double contact bulbholder. with or without number plate illumination.
£26.00
-
steel rear lamp bracket suitable for divers helmet rear lamp and similar requiring spade mounting. this part is prefabricated and supplied undrilled. overall height approx 125mm. fitting to the car (
£12.20
-
rear stop/rear lamp as Lucas L549 for mounting on to sloping rear wing panel. red plastic lens. chrome base plate with flat back rubber mounting pad. base 85mm x 142mm.
£17.30
-
mounting bracket (with rubber pad and bolts) for mounting 211/958 lamps away from wing. chromium plated. available for left or right of car. measurement long the 'underside' when fitted approx 105mm.
£18.00
-
round 'Pork Pie' rear lamp, as Lucas ST38, fitted with emblem. 90mm diameter x 65mm deep, brass body, red glass lens, with clear side lens. three single contact bulbholders. black enamel finish.
£31.50
-
round 'Pork Pie' rear lamp, as Lucas ST38, fitted with emblem. 90mm diameter x 65mm deep, brass body, red glass lens, with clear side lens. three single contact bulbholders. black finish to body, chro
£33.00
-
'D' Lamp full red glass lens, fitted with double contact bulbholder (for stop and tail lamps) brass body 92mm x 85mm x 60mm. clear side number plate illumination lens. black enamel finish.
£36.00
-
'D' Lamp full red glass lens, fitted with double contact bulbholder (for stop and tail lamps). brass body 92mm x 85mm x 60mm. clear side number plate illumination lens. chromium finish.
£37.00
-
early pattern 'D' lamp with split red glass lens, fitted with two bulbholders. brass body 92mm x 85mm x 60mm. clear side number plate illumination lens, black enamel finish.
£52.00
-
early pattern 'D' lamp with split red glass lens, fitted with two bulbholders. brass body 92mm x 85mm x 60mm. clear side number plate illumination lens, chromium finish
£52.00
-
single red lens duolamp, stainless steel rim 97mm diam, stainless steel body 60mm deep. one double contact bulbholder. with or without number plate illumination.
£31.50
-
legal version of a very popular vintage Lucas rear lamp type 582 with side number plate illumination. red plastic lens 55mm dia, body 58mm long x 42mm diam, overall length 92mm. black body as standard
£27.50
-
polished stainless steel (110mm x 55mm x 80mm deep) with glass lens. single bolt fixing allows choice of mounting. single contact bulbholder (21w max bulb). choice of clear lens for a reversing lamp,
£19.25
-
rubber divers helmet lamp - approx 70mm diameter body, supplied with red flat main lens, clear side window. double contact bulbholder fitted, enabling use of double filament bulb. amber lens available
£33.00
-
a neat rear lamp, with single mounting which can be supplied with a flat lens instead of the domed (red or amber) lens fitted, to give a lamp of vintage appearance, into which 5w bulbs only will fit.
£24.20
-
round Rubbolite number 25 rear lamp with flat back - 91mm diameter at widest with raised red lens and side number plate illumination lens. two double contact bulb holders fitted on an inside plate of
£26.00
-
recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, glass lens (25mm depth from mount pamel), choice of amber, red or clear. Lucas model 488 with flat lens, mounts through 35mm panel hole.
£15.95
-
round 'Pork Pie' rear lamp, as Lucas ST38, converted for combined stop/rear/indicator function. 90mm diameter x 65mm deep, split red/amber lens, with clear side lens. the bulbholders are modified to f
£64.20
