round rear view mirror suitable for the smaller Edwardian car, flat type arm clamps to windscreen frame, optimum size approx 25mm diameter. diameter of head 128mm (flat glass) - note this item is stocked in brass only, however is available to order in chrome at greater cost of £35.35
£31.85
|
circular rear view mirror 140mm dia. a splendid reproduction of a large windscreen - pillar mounted early motoring mirror. fitted with a convex lense the unit can be adjusted for length and is available in either polished brass or nickel. suitable for most medium to large sized vehicles. arm 10mm diameter, length approx 250mm.
£99.50
|
painted steel clamp for 1/2" (12.7mm) rod, for rear of mirror etc. as shown.
£2.75
|
dash mounted mirror with single bolt fixing 110mm x 65mm. chromium finish, 120mm overall height, 'Desmo' pattern. used on several sports cars including MG.
£27.00
|
single mount flat glass rear view mirror. 160mm x 82mm flat glass with chrome surround and back. overall height 120mm.
£27.00
|
oval type Desmo embossed convex glass mirror suitable for vehicles of the '30's, size 110mm tall x 82mm wide (overall length 153mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. our own manufacture, brass/bronze construction, copied from an original 'Desmo', chromium or nickel finish, also polished brass. although these were originally made for right hand mounting we do offer left hand if specified.
£51.00
|
oval type Desmo embossed convex glass mirror suitable for vehicles of the '30's, size 110mm x 82mm (overall length 175mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. our own manufacture, brass/bronze construction, copied from an original 'Desmo', chromium or nickel finish, also polished brass. although these were originally made for right hand mounting we do offer left hand if specified.
£45.00
|
we offer an extended length body mount bracket arm with approx 25mm longer reach than standard to enable the Desmo mirror to be positioned slightly further away from mouting base. base 58mm x 15mm, holes 38mm centres, flat back.
£12.50
|
oval type exterior mirror with flat glass suitable for vehicles of the '30's, size 128mm x 81mm (overall length 196mm). complete with concave base mounting bracket 58mm x 14mm, hole centres 43mm approx. note detail to mounting edge of rear of mirror. brass/bronze construction, chromium finish only.
£49.50
|
round mirror 145mm diameter marked Desmo, supplied with either convex or flat glass. fitted with 1/2" (12mm) mounting clamp as standard. available in chromium or nickel plate, or polished brass
£38.00
|
Lucas type 160 exterior rear view mirror 153mm x 82mm, chromium finish, convex glass with 1/2" (12mm) clamp. backing plate held in place with 4 screws into brackets. original equipment for MG etc '30s vehicles.
£76.00
|
chrome plated non adjustable cranked mirror arm, base 96mm x 21mm. 7/16" (11mm) rod approx 150mm long. specify left or right.
£26.00
|
replacement convex mirror glass for Lucas type 160 (our 395) mirrors
£11.00
|
replacement convex mirror glass for nominal 150mm x 75mm Raydyot or Desmo (our 514) mirrors
£10.00
|
replacement convex mirror glass for Desmo oval knuckle mount mirror , convex or flat offered
£7.50
|
adjustable 1/2" (12mm) cranked rod arm, base 59mm x 22mm. approx 190mm long. two 6.5mm approx mounting holes 39mm apart. available in chrome or nickel plated, or polished brass
£27.00
|
adjustable knuckle type mirror arm, base 65mm x 18mm (holes approx 42mm centres). approx 165mm long. available in chrome or nickel plated, or polished brass.
£24.00
|
adjustable 3/8" (10mm) cranked rod arm, base 59mm x 22mm. approx 190mm long. two 6.5mm approx mounting holes 39mm apart. available in chrome or nickel plated, or polished brass
£25.00
|
oval arm mounting mirror marked Desmo, size 110mm x 82mm, fitted with clamp for 3/8" (10mm) arm. available chromium or nickel plated finish, or polished brass. convex glass.
£31.00
|
Raydyot or Desmo type 36 rectangular convex glass mirror, 155mm x 80mm, with central rear mounting clamp. available in chromium or nickel plate, or polished brass. screws to outside rim.
£36.00
|
spare wheel mounted rear view mirror, chrome 115mm dia flat glass, complete with leather strap 560mm long. longer leather strap available if required at extra cost.
£38.50
|
wheel mount rear view mirror - our own make, secured to wheel with two long leather straps. brass construction, 120mm flat or convex round head. supplied chrome, nickel or polished brass. this mirror has various adjustment points to cover most applications. we do not avise use if wheel discs are on wheel. base size is 194mm x 72mm.
£128.00
|
rectangular arm mounting mirror marked Desmo, size 118mm x 67mm, fitted with clamp for 3/8" (10mm) arm. available chromium or nickel plated finish, with either either flat glass or convex glass, convex glass price is £37.00 piece.
£31.00
|
rectangular rear view mirror suitable for the larger Edwardian car. all brass finish. mirror size 178mm x 127mm. fully adjustable mounting bracket for fixing to windscreen pillar. bevelled glass.
£135.00
|
|
round mirror 120mm diameter marked Desmo, supplied with either convex or flat glass. fitted with 3/8" (10mm) mounting clamp as standard. available in chromium or nickel plate, or polished brass
£36.00
|
small round mirror marked Desmo, 104mm diameter, flat glass only, fitted with 3/8" (10mm) mounting clamp. available nickel or chrome plate, or polished brass
£35.00
|
heavy veteran or edwardian pattern mirror of a style manufactured by Toby previously. flat mirror glass with heavy rim and backing. head 144mm diameter. substantial arm approx 270mm long with very secure mounting base plate 50mm x 63mm. this item is offered in polished brass or nickel plate finish at additional cost
£155.00
|
heavy veteran or edwardian pattern mirror of a style manufactured by Toby previously. flat mirror glass with bevel edge & heavy rim and backing. head 172mm x 135mm. substantial arm approx 270mm long with very secure mounting base plate 50mm x 63mm. this item is offered in polished brass or nickel plate finish at additional cost
£265.00
|
