Chrome on brass folded centre bonnet strip. 1270mm length (50") 21mm wide. Side panels are folded and slide in place. This part will need to be cut shorter by user for some applications. If sent...
Parts
chrome plate end cover and clamp for centre strip. base 51mm x 13mm, holes 35mm apart.
Folded steel side strip for sliding into bonnet strip, one piece 48"/1.22 metres long. Weld to flat panel. 25mm overall width (flange 14mm) Please note this item exceeds the dimensions for our...
Brass folded centre bonnet strip. 60 inch length specially commissioned for long bonnet applications. 21mm wide and same profile as part number 16632. Side panels are folded and slide in place....
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.
please note that this...
please note that this...
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.
heavyweight hinge, 5/16" (8mm) steel pin, 16 swg (1.6mm) unpolished brass flap undrilled, 3" (76mm) across flats when open, 2" (51mm) knuckles. offered in various lengths.
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.
please note...
please note...
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.
medium weight hinge, 1/4" (6mm) steel pin, 16 swg (1.6mm) unpolished brass, flaps undrilled, 2 1/2" (64mm) across flats when open, 2" (51mm) knuckles, offered in specific lengths.
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 5/16" (8mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
Folded type of hinge, brass pin, stainless steel flange, 2" (approx 51mm) knuckles, these are supplied in sets of one top hinge and two side hinges OR as individual hinges - top hinge 1/4" (6mm)...
chrome on brass folded centre bonnet strip, 845mm length (33.25") 21mm wide. side panels are folded and slide in place. this part is offered in the longer length for the listed vehicles. the...
Chrome on brass fitting. base 45mm x 16mm, mounting holes 32mm centres.
Chrome plate on brass bonnet pin support plate with 5/16" (approx 8mm) hole. base 55mm x 18mm, countersunk mounting holes 36mm centres.
heavy bonnet hinge 3/8"/10mm diameter pin, 16 swg (1.6mm) flaps , 75mm across flaps when open, 51mm knuckles 5ft/ 1.52m long only. brass flaps with stainless pin
heavy bonnet hinge 3/8"/10mm...
heavy bonnet hinge 3/8"/10mm...
heavy bonnet hinge 3/8"/10mm diameter pin, 16 swg (1.6mm) flaps , 75mm across flaps when open, 51mm knuckles 5ft/ 1.52m long only. brass flaps with stainless pin
heavy bonnet hinge 3/8"/10mm...
heavy bonnet hinge 3/8"/10mm...
heavy bonnet hinge 3/8"/10mm diameter pin, 16 swg (1.6mm) flaps , 75mm across flaps when open, 51mm knuckles 5ft/ 1.52m long only. brass flaps with stainless pin
heavyweight stainless folded type top bonnet hinge, 3/8" (10mm) brass pin, 16swg stainless steel flap folded towards pin, approx 45mm when open, 50mm knuckles, 54" (1.37m) long
Chrome on brass fitting. base approx 45mm x 16mm, 28mm deep overall. mounting holes 31mm centres.
Chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Chrome plate on brass fitting with 1/4" (approx 6mm) hole. base 45mm x 15mm, mounting holes 31mm apart.
Chrome on brass fitting. base 48mm x 19mm, mounting holes 32mm centres.
Prices shown include VAT @ 20% where applicable
