Self-adhesive backed DUAL HARDNESS EPDM / sponge door seal. 15.5mm high, 11.5mm wide base. Used in many classic car door, window and general sealing applications
Parts
Self adhesive backed expanded EPDM Sponge D Section. 8mm base with adhesive backing, 10mm high. Used in many classic car door, window and general sealing applications
Self adhesive backed expanded EPDM Sponge D Section. 12mm base with adhesive backing, 10mm high. Used in many classic car door, window and general sealing applications
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber strip used for glazing into frames and mounting strip, available in sizes
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
38mm x 1.0mm
38mm x 1.5mm
50mm x 1.5mm
50mm x 3.0mm
75mm x 1.5mm...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
black rubber drain tubing available in the following sizes at prices per metre shown
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
6mm bore x 3mm wall
8mm bore x 3mm wall
10mm bore x 3mm wall
16mm bore x 2.5mm wall...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
Closed cell sponge with self adhesive backing strip. Will only absorb moisture into the cut hollow cell. Stock sizes are:
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
3mm x 8mm
3mm x 13mm
3mm x 25mm
6mm x 25mm
6mm x 38mm
10mm x 25mm...
black rubber windscreen filler/lock strip available separately for window weatherstrip. arrow head shape filler approx 10.4mm wide.
'chrome' finish plastic windscreen filler/lock strip available separately for window weatherstrip. arrow head shape filler approx 10.1mm wide.
'chrome' finish plastic T section windscreen filler/lock strip for windscreen weatherstrip. 'T' shape filler approx 7.6mm wide x 7mm tall with 3.5mm diameter bead at the base. As used on the...
Black, as per illustration. 6mm base x 21mm overall, 2mm neck.
Black, as per illustration. 6.5mm diameter with 1.5mm slot.
Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip...
Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip...
Black, as per illustration, 26mm wide, glass 6.00mm and panel 6mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. this section is supplied with a similar amount of filler strip...
Black, as per illustration. flat base 20mm, height 10mm, approx 30mm overall
Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip...
Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip...
Black, as per illustration. 21mm wide, glass 3.00mm and panel 3mm. Clearance between glass and panel 7mm. Minimum bend radius 64mm. This section is supplied with a similar amount of filler strip...
Black, as per illustration. flat base 19mm, height 9mm, approx 26mm overall
Black, as illustration, 9mm diameter bead, 14mm overall height, 7.5mm base.
Black, as per illustration. 3.5mm bead x 28mm wide, 1.6mm thick tail.
Black, as per illustration, base 20mm, flange 26mm extended, approx 21mm at rest. Available in the following lengths only:
1.54m long - order ONE length only
3.08m long - order TWO length -...
1.54m long - order ONE length only
3.08m long - order TWO length -...
Black, as per illustration. 10mm across base x 19mm overall, 6mm neck.
Black, as per illustration. 12mm x 24mm overall, slot 2mm.
Black, as per illustration. 11mm bead x 38mm overall
Black, as per illustration. 10.2mm x 4.5mm with 2mm slot
Black, as per illustration. 11.5mm x 6.7mm with 3mm slot
Black, as per illustration. 16mm x 4.5mm with 2mm slot
Black, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm glass
Black, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm glass
Black, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm glass
Black, as per illustration. Choice of three sizes, for either 3mm, 4.5mm or 6mm glass
8mm tall with a 6mm base.
8mm tall with a 6mm base.
Black, as per illustration for 6mm glass. 12mm deep x11mm wide, flange tails 8mm and 9mm long approx
Black, as per illustration for 6mm glass. 12mm deep x 11mm wide, flange tail 12mm long approx.
Black filler strip for roof seal, as per illustration. Base 12mm, top width 20mm, overall height 10mm.
Split tube rubber extrusion, used as base for draught excluder. As used on MG 'Y' and Morris 'E.' 32mm x 11mm overall, 2mm thick.
Black, as per illustration. 41mm x 5mm, 34.5mm between inside faces. Commonly used between tanks and metal straps to avoid wear.
Black, as per illustration. Approx 15mm x 15mm body, flange tail approx 21mm long.
Black, as per illustration. Approx 15mm x 15mm body, flange tail approx 21mm long.
Black, as per illustration. Approx 15mm x 15mm body, flange tail approx 21mm long.
Rear windscreen rubber for anglia, prefect and popular with bakelite trim fitted. 2.2mtr required
Rear windscreen rubber for anglia, prefect and popular with bakelite trim fitted. 2.2mtr required
Black, as per illustration. 3.75mm bead x 20mm overall, 1.75mm thick tail.
Black, as per illustration. 5.5mm diameter bead x 15mm overall, 1.6mm flange thickness.
Black, as per illustration. 11mm bead x 26mm overall, 1.8mm thick tail
Black, as per illustration. 7.5mm bead x 21mm overall, 2.3mm flange thickness.
Black, as per illustration. Used where the glass is larger than the panel aperture hole. Glass - maximum 6mm thickness. Panel maximum 3mm thickness. This section is supplied with the same amount...
Black, as per illustration. 15mm x 9mm x 1.8mm thickness approx
Black, as per illustration. Approx 12mm across base x 6mm body depth.
Black silicone extrusion as profile, particularly suitable for quarterlight seal (Bristol, Riley). Base 6mm, 11mm high, flange extends19mm. Overall width 23mm.
Wedge shaped black silicone rubber, used as Sheerline quarterlight seal. 11mm long, 5.6mm wide at thick end, 1.6mm wide at thin end.
Black, as per illustration. dimensions 19mm long 6.8mm thick, reducing to 3.5mm at 'T' with 1mm tongue on front edge.
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 21mm wide, glass 4.75mm and panel 0.8mm to 1.6mm. Clearance between glass and panel 7mm. Minimum bend radius 58mm. This section is supplied with a similar amount of...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Black, as per illustration. 23mm wide, glass 4.75mm to 6mm and panel 3.1mm to 3.5mm. Clearance between glass and panel 8mm. Minimum bend radius 102mm. This section is supplied with a similar...
Black, as per illustration, approx 18mm overall wide, slot approx 10mm deep x 1.5mm wide.
Black Expanded Neoprene / sponge rubber half round section, skinned on all sides - 12.5mm base 6.5mm thick
Black Expanded Neoprene / sponge rubber half round section, skinned on all sides - 16mm base 8mm thick
Black Expanded Neoprene / sponge rubber half round section, skinned on all sides - 25mm base 12.5mm thick
Section as per illustration. choice of black section, base size approx 15mm x 15mm or grey section, base size 13mm x 13mm. Soft extrusion.
section as per illustration, base 13mm, 20mm overall. 14mm tall with a hollow centre extrusion with softer flange. black.
wholesale quantities only - full 30 metre rolls
wholesale quantities only - full 30 metre rolls
Section as per illustration, base 8.3mm, overall 15mm x 16mm. Black skinned section
Section as per illustration, flat sides approx 13.5mm x 13.5mm. Black skinned hollow section.
Section as per illustration, approx 16.5mm base x 15mm tall. Skinned section
Section as per illustration, 9mm flat base x 8.5mm tall. Soft skinned black section
Section as per illustration, 12.5mm x 12.5mm. Firmer skinned section
Section as per illustration, GREY ONLY 17mm x 12mm. BLACK DIS-CONTINUED
Section as per illustration, base 8.5mm wide, overall 17mm x 17mm. Softer black skinned section.
Section as per illustration, base 16mm wide, overall 20mm x 19mm. Firmer skinned black flange section.
Section as per illustration, flat base approx 13mm wide, 15mm high. Soft skinned flange section.
Hollow section as per illustration, 14mm base x 12mm tall, wall thickness 1.5mm, black.
Section as per illustration, 12mm tall x 10mm wide approx. Soft skinned black section.
Section as per illustration, 11mm wide flat base x 12mm high. Soft black skinned section.
section as per illustration, small triangle section, 12mm base x 6mm tall. . soft skinned black section
black, as illustration, base 5.5mm, bead 6.5mm diameter, overall height 10mm.
Section as per illustration, 20mm base, 24mm tall flange section with hollow slot through base.
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Skinned round expanded sponge cord, good for general sealing applications.
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Stock sizes:
4mm diameter
5mm diameter
6mm diameter
8mm diameter
10mm diameter
12mm diameter
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Extruded sponge rectangular section, skinned on all four sides. Stock sizes:
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
3mm x 16mm
6mm x 12mm
12mm x 12mm
10mm x 19mm
6mm x 19mm
10mm x 16mm
13mm x 25mm
Prices shown include VAT @ 20% where applicable
