parts and spares

• CA1165 - acetylene gas lamp burner
  
  acetylene gas burners for carbide lamps offered as shown. these are new old stock and the brass will show some tarnish marks. as shown on the bigger image:
  left - threaded base (taper thread from 6.
  £5.00
• 378BRC - BRC lamp plaque
  
  BRC lamp oval plate - engraved copper.
  marked B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA
  measures 59mm x 26mm
  £11.00
• 422 - bulb holder
  
  single ended bulb holder. rear nut removes to expose terminal contacts. double contact.
  £10.35
• CA605 - bulb holder
  
  useful bulbholder (BA15) with bracket, which can be bent as necessary. offered in single contact or double contact.
  £6.40
• 254 - bulb holder plug
  
  plug for SBC type holder, double contact. also offered in single contact.
  £5.80
• 153 - bulbholder
  
  replacement general purpose bulb holder (accepts 15mm base bulb). offered for various bulbs configurations.
  single contact parallel pin, double contact parallel pin, double contact offset pin. (pin r
  £6.65
• 424 - bulbholder
  
  double contact bulbholder for our 297 (Lucas 1130) sidelamp, accepts double contact SBC Ba15d bulbs
  £10.70
• CA-265A - Chrome cover
  
  Chrome on Brass cover for the 265 lamp
  £9.80
• 177 - D lamp rim for Lucas model 288-3 box lamp
  
  replacement chrome finish D lamp rim (Lucas 523333) for the Lucas box type 288-3 rear number plate lamp on the rear number plate box assembly. this is retained by a side hinge pin, and retained shut
  £27.00
• 767W - D lamp wire clip
  
  glass retaining wire for D Lamp
  £1.60
• 253 - double end bulbholder
  
  double contact holder which accepts a plug or standard SBC bulb at either end. threaded outside body. we also offer this item in single contact guise
  £10.45
• 357 - headlamp bowl
  
  headlamp bowl for standard 7" (700) units, plastic back shell (will not rust) complete with plated retaining rim holder, adjusters and bowl to body sealing ring/gasket
  £14.70
• E04C-13016 - headlamp rim catch
  
  chrome plate bracket.
  £4.50
• E1ADKN-13047/50 - headlamp rim screw and nut
  
  chrome plated
  £5.00
• 632 - headlamp stem nut
  
  hexagonal brass nut for headlamp, 5/8" x 26 tpi (fine thread). (approx 16mm bore)
  £2.00
• 632B - headlamp stem nut Lucas RB160 type
  
  brass headlamp stud mounting nut for Lucas RB160, P100, P80 etc type lamp. thread 1/2" x 26 tpi
  as Lucas part 500357
  £2.50
• 629C - headlamp stud - Butler type
  
  headlamp mounting bolt (hollow). thread 5/8" x 26 tpi ( fine thread). measures approx 68mm long x 16mm thread diameter.
  £6.00
• 629E - headlamp stud - P100, P80, RB160
  
  P100, P80, RB160 headlamp mounting bolt. thread 1/2" x 26 tpi ( fine thread) as original. measures approx 85mm long x 13mm thread diameter (thread runs for 24mm).
  £6.00
• visor - headlamp visor
  
  headlight peak for 7" lights, stainless steel, clips behind inner headlight rim.
  £8.10
• 642 - headlamp W wire
  
  W wire clip to hold glass into headlamp rim, approx 35mm long
  £0.52
• 642L - headlamp W wire - P100 type
  
  large W wire for holding glass into rim, approx 60mm long side. this clip is actually made for P100 lamps.
  £1.45
• 642A - long headlamp W wire clip
  
  large W wire spring clip for holding glass into rim. approx 62mm long side. useful for deep headlamp rims.
  £0.70
• CA1283 - Lucas enamel badge
  
  large LUCAS enamel badge (4 colour), for tops of some larger Lucas lamps, 19.3mm wide x 22.5mm tall. offered in chrome or nickel (please specify).
  £9.50
• 516luc - Lucas lamp badge medallion
  
  reproduction Lucas King of the Road badge. chrome plate (nickel to order) brass castings with lugs on rear to peen over and secure as original. we stock the following sizes (measure overall diameter o
  £4.10
• 357A - Lucas pattern headlamp bowl
  
  metal Lucas type headlamp bowl for standard 7" (700) units. three adjuster, supplied with metal back shell, chrome retaining rim holder, adjusters and bowl to body sealing ring/gasket
  £25.00
• 357-PF - pre-focus headlamp connection with lead
  
  pre-focus headlamp connector with lead, double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall length 910mm.
  £10.00
• LR576 - replacement 576 lamp unit - driving
  
  replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). plain dome lens with chrome centre dot. order bulb separately - single contact type base P22s
  £29.00
• FT576 - replacement 576 lamp unit - fog
  
  replacement glass lamp unit for Lucas type 576 lamps. supplied with bulbholder (no bulb). block pattern dome lens with chrome centre dot. order bulb separately - single contact type base P22s
  £29.00
• 361 - replacement front lens
  
  plastic front lens for our 297 (Lucas 1130) sidelamp.
  £6.00
• CA1247L - replacement oval lens
  
  replacement red colour main front lens for lamp
  £12.75
• 516rot - Rotax lamp badge medallion
  
  reproduction Rotax badge. chrome plate (nickel to order) brass casting with lugs on rear to peen over and secure as original. we stock the following sizes (measured across outside of badge).
  very sma
  £4.10
• 357-SB - sealed beam headlamp connector with lead
  
  sealed beam headlamp connector with lead, nylon block three lucar connector, three wires with headlamp bowl sealing grommet and soldered bullets, overall length 850mm.
  £5.75
• 215 - semaphore arm
  
  semaphore (orange) plastic blade to fit Lucas SF80 trafficator, (equivalent part 532026).
  £6.25
• 215B - semaphore arm backing
  
  polished stainless steel backing for SF80 trafficator.
  £6.25
• 424A - sidelamp bulbholder (twin bulb)
  
  two bulb (yellow for flasher, clear for sidelamp) - 12 volt ONLY - bulbholder for fitting into Lucas type 1130 sidelamps. supplied in pairs only with a spare amber bulb.
  £41.50
• 642s - small lamp wire
  
  small w wire clip for sidelamps, packet of 6 pieces
  £1.80