Hose Tail Fittings for Fuel

1/4BSPT-5/16C-STR - 1/4BSPT Male Straight For 5/16"ID Hose

From £2.47 (£2.96 inc. VAT @ 20%)

CA826 - Flexible hose fittings

From £3.95 (£4.74 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

CA826A - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 1/4" ID pipe

From £3.95 (£4.74 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 1/4" push on pipe

CA826B - Flexible hose fittings - 1/4" BSP female nut with barbed hose fitting for 5/16" ID pipe

From £4.75 (£5.70 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

1/4"BSP nut for 5/16" pipe

CA826C - Flexible hose fittings - 3/8" BSP female nut with barbed hose fitting for 3/8" ID pipe

From £5.45 (£6.54 inc. VAT @ 20%)

Brass BSP threaded nut and push on hose connector fitting

3/8"BSP nut for 3/8" push on pipe

1/4BSPT-1/4C-STR - 1/4BSPT Male Straight For 1/4"ID Hose

From £3.45 (£4.14 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4BSPM-5/16C-STR - 1/4" BSP Male For 5/16" ID Hose

From £4.49 (£5.39 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4BSPM-3/8C-STR - 1/4" BSP Male Straight For 3/8" ID Hose

From £6.22 (£7.46 inc. VAT @ 20%)

Straight 1/4" male to 3/8" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

1/4BSPF-5/16C-STR - 1/4" BSP Female Straight For 5/16" ID Hose

From £3.92 (£4.70 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4BSPT-7/16C-STR - 1/4BSPT Male Straight For 7/16"ID Hose

From £3.12 (£3.74 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

3/8BSPM-1/4C-STR - 3/8" BSP Male For 1/4" ID Hose

From £4.66 (£5.59 inc. VAT @ 20%)

Straight 3/8" BSP male to 1/4" hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

3/8BSPM-5/16C-STR - 3/8BSP Male For 5/16" ID Hose

From £9.53 (£11.44 inc. VAT @ 20%)

Straight 3/8" BSP male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

3/8BSPT-1/2C-STR - 3/8" BSPT Male Straight For 1/2" ID Hose

From £3.99 (£4.79 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

3/8BSPM-3/8C-STR - 3/8" BSP Male Straight For 3/8" ID Hose

From £8.44 (£10.13 inc. VAT @ 20%)

3/8" BSP Straight male to 3/8" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor installations.

3/8BSPT-3/8C-STR - 3/8" BSPT Male Straight For 3/8" ID Hose

From £3.57 (£4.28 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

3/8BSPF-3/8C-STR - 3/8" BSP Female Straight For 3/8" ID Hose

From £4.45 (£5.34 inc. VAT @ 20%)

Straight female to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

HJ1/4 - 1/4" ID Hose Joiner

From £2.08 (£2.50 inc. VAT @ 20%)

Steel Hose Joiner For 1/4" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

HJ5/16 - 5/16" ID Hose Joiner

From £2.66 (£3.19 inc. VAT @ 20%)

Steel Hose Joiner For 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

HJ1/4-5/16 - 1/4" To 5/16" ID Step Up Hose Joiner

From £3.31 (£3.97 inc. VAT @ 20%)

Steel Step Up Hose Joiner - from 1/4" To 5/16" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

HJ5/16-3/8 - 5/16" To 3/8" ID Step Up Hose Joiner

From £3.66 (£4.39 inc. VAT @ 20%)

Steel Step Up Hose Joiner from 5/16in To 3/8in ID Hose.Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

HJ3/8 - 3/8" ID Hose Joiner

From £3.41 (£4.09 inc. VAT @ 20%)

Steel Hose Joiner For 3/8" ID Hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ1/4T - 1/4" ID Hose Push On Brass 'T' Piece

From £16.40 (£19.68 inc. VAT @ 20%)

T piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ5/16T - 5/16" ID Hose Push On Brass 'T' Piece

From £10.95 (£13.14 inc. VAT @ 20%)

T piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ3/8T - 3/8" ID Hose Push On Brass 'T' Piece

From £11.75 (£14.10 inc. VAT @ 20%)

T piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ3/8-5/16UT - 2 x 3/8" and 1 x 5/16" ID Hose Push on Unequal 'T' Piece

From £11.15 (£13.38 inc. VAT @ 20%)

Unequal T piece with hose tail fittings for 3/8 and 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor...

MHJ1/4Y - 1/4" ID Hose Push On Brass Y' Piece

From £9.39 (£11.27 inc. VAT @ 20%)

Y piece with hose tail fittings for 1/4" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ5/16Y - 5/16" ID Hose Push On Brass Y' Piece

From £10.57 (£12.68 inc. VAT @ 20%)

Y piece with hose tail fittings for 5/16" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

MHJ3/8Y - 3/8" ID Hose Push On Brass Y' Piece

From £11.75 (£14.10 inc. VAT @ 20%)

Y piece with hose tail fittings for 3/8" ID hose. Assemble with swage ferrule, O clamps, worm drive or nut and bolt clamps. Suitable for low pressure (up to 15psi) carburettor installations.

1/8NPTFM-1/4C-STR - 1/8NPTF Male Straight For 1/4" ID Hose

From £2.70 (£3.24 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/8NPTFM-5/16C-STR - 1/8NPTF Male Straight For 5/16" ID Hose

From £2.58 (£3.10 inc. VAT @ 20%)

Straight 1/8" NPTF (tapered) male to 5/16" ID hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low-pressure (up to 15psi) carburettor...

1/8NPTFM-3/8C-STR - 1/8NPTF Male Straight For 3/8" ID Hose

From £5.29 (£6.35 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-1/4C-STR - 1/4NPTF Male Straight For 1/4"ID Hose

From £10.20 (£12.24 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-5/16C-STR - 1/4NPTF Male Straight For 5/16" ID Hose

From £4.35 (£5.22 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-3/8C-STR - 1/4NPTF Male Straight For 3/8" ID Hose

From £6.68 (£8.02 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-9/16C-STR - 1/4NPTF Male Straight For 9/16" ID Hose

From £6.19 (£7.43 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

1/4NPTFM-1/2C-STR - 1/4NPTF Male Straight For 1/2" ID Hose

From £6.30 (£7.56 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburetor installations.

3/8NPTFM-3/8C-STR - 3/8NPTF Male Straight For 3/8" ID Hose

From £6.17 (£7.40 inc. VAT @ 20%)

Straight male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/8NPTFM-1/4C-90 - 1/8" NTPF Male 90° For 1/4" ID Hose - Brass

From £7.33 (£8.80 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/8NPTFM-5/16C-90 - 1/8" NPTF Male 90° For 5/16" ID Hose - Brass

From £9.34 (£11.21 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive clamp or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/8NPTFM-3/8C-90 - 1/8" NPTF Male 90° For 3/8" ID Hose - Brass

From £5.90 (£7.08 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-5/16C-90 - 1/4" NPTF Male 90°For 5/16" ID Hose - Brass

From £8.95 (£10.74 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.

1/4NPTFM-3/8C-90 - 1/4" NPTF Male 90° For 3/8" ID Hose - Brass

From £8.21 (£9.85 inc. VAT @ 20%)

90 degree male to hose tail fitting. Assemble with swage ferrule, O clamp, worm drive or nut and bolt clamp. Suitable for low pressure (up to 15psi) carburettor installations.