Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
As original pattern, smoke grey paint finish, flat glass, for 100E and 103E. Plain flat glass with ball clamp fitting to stem. Hand finished glass size approx 132mm x 46mm. Overall height 107mm....
692.10924" diameter circular 'Peep' mirror. Clips on to door or quarterlight frame with an adjustable bracket. Good quality, stainless steel mirror head and chrome arm. A well made part to improve your...
Clamp on circular mirror which will fit to either the left or right side of the vehicle. The head is approx. 3" (78mm) in diameter. Stainless steel mirror back with FLAT glass, mounted on curved...
Factory fitment to GM classics of the 50s from Chevrolet, Pontiac, Oldsmobile, Plymouth, though often seen on UK classics and hotrods. Fully adjustable and supplied complete with screws, moulded...
Replacement FLAT mirror glass for Wingard 694 pattern dash mounted mirrors - our part number 584 mirror. Dimensions 146mm long x 55mm tall tapering down to 35mm.
622.6749USA made billet aluminium post mirrors. This comes with a threaded stud that can be screwed in to a pillar or post and the the mirror can be attached to that. Mirror head 81mm total length 170mm....
American style mirror similar to the MIR310 but fitted with the Lucas 406 style mirror head that offers a much higher degree of adjustment than the centre ball stud on MIR310. Supplied complete...
517.4057Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with...
516.1998Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with...
516.1998Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with...
516.1998Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with...
516.1998Four styles of chrome mirror arms that mount through a 16mm hole in panel. With swing back spring (protected in plastic sleeve) protuding 50mm under arm, secured with a 3/4" AF nut. Supplied with...
516.1998Gutter mount type clamp on stainless steel mirror. CONVEX glass 115mm x 73mm with stainless steel mirror back and cranked mounting bracket. Two screws nip the assembly to the right hand side of...
Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter...
513.2128Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter...
513.2128Non-adjustable cranked rod mirror arm, available in chrome or nickel plated finish - please make your selection from the option box. Arm base dimensions 96mm x 21mm with two approx. 6mm diameter...
513.2128Racing, bullet type mirror with FLAT glass. Designed to clamp onto the front face of the door or window frame. This mirror will also clamp on to some windscreen surrounds. No drilling...
Chrome plated non adjustable cranked right hand mirror arm, base 96mm x 21mm x two 6mm holes with 62mm centres. 7/16" (11mm) rod approx 150mm long. This arm is a one off special, made with 62mm...
507.40445Quarterlight clamp on stainless steel mirror. FLAT glass 115mm x 70mm with stainless steel back mounted on a curved arm. Arm extends out 55mm from mounting screws and then 65mm up to the centre of...
505.29028Quarterlight glass type clamp on stainless steel mirror. CONVEX glass 115mm x 73mm, with stainless steel mirror back and straight bracket. Two screws nip the assembly to the edge of the opening...
504.81583Pre-war spotlamp equivalent to original Lucas part number S217. A superb reproduction of this combined spotlamp and driving mirror. This lamp has been painstakingly recreated from an original...
504.04163Pre-war spotlamp equivalent to original Lucas part number S217. A superb reproduction of this combined spotlamp and driving mirror. This lamp has been painstakingly recreated from an original...
504.04163Pre-war spotlamp equivalent to original Lucas part number S217. A superb reproduction of this combined spotlamp and driving mirror. This lamp has been painstakingly recreated from an original...
504.04163Pre-war spotlamp equivalent to original Lucas part number S217. A superb reproduction of this combined spotlamp and driving mirror. This lamp has been painstakingly recreated from an original...
504.04163Pre-war spotlamp equivalent to original Lucas part number S217. A superb reproduction of this combined spotlamp and driving mirror. This lamp has been painstakingly recreated from an original...
504.04163Spare wheel mounted rear view mirror, chrome finish, 115mm diameter flat glass, complete with tan leather strap 560mm long. Longer leather straps are available if required at an extra cost -...
Rectangular clip on mirror, designed to fit on the front edge of a door. 64mm x 127mm stainless steel mirror head, 152mm long chrome plated zinc alloy die cast arm.
Oval mirror for arm mounting, stamped marked Toby. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
499.74692Oval mirror for arm mounting, stamped marked Toby. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
499.74692Oval mirror for arm mounting, stamped marked Toby. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
499.74692Oval mirror for arm mounting, stamped marked Toby. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
499.74692Replacement mirror glass for 653 Desmo or CA1262 Raydyot type oval knuckle mount mirror - CONVEX or FLAT offered, please select from the option box.
454.71063Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
445.88904Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
445.88904Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
445.88904Oval mirror for arm mounting, stamped marked Desmo. Similar in design to the Desmo 217 model. Head size 110mm x 82mm, fitted with a clamp for 3/8" (10mm) diameter arm. Available in polished brass...
445.88904Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed 'Toby Mitchell - Toby - London NW1', the mark Vintage Supplies has applied to its authentic reproductions of selected...
445.5675Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed 'Toby Mitchell - Toby - London NW1', the mark Vintage Supplies has applied to its authentic reproductions of selected...
445.5675Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed 'Toby Mitchell - Toby - London NW1', the mark Vintage Supplies has applied to its authentic reproductions of selected...
445.5675Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed 'Toby Mitchell - Toby - London NW1', the mark Vintage Supplies has applied to its authentic reproductions of selected...
445.5675Self adhesive interior mirror, with large 155mm x 60mm size mirror head. Stainless steel mirror edge and back. Black plastic stem with self adhesive pad.
Polished stainless mirror back with chrome stem which is suitable for door or wing mounting. This elegant mirror is not handed and can be used on offside or nearside of the vehicle. 120mm diameter...
442.07663ITAL exterior door mirror, polished stainless steel head with CONVEX glass 113mm in diameter. Mounted on a chrome plinth with a single bolt fixing and a locating peg - approximately 29mm between...
Polished stainless steel interior rear view mirror. Mirror head 128mm x 56mm with stainless steel backing and edge rim. Mounting arm 44mm long with a 58mm x 16mm mounting pad, hole centres at...
441.4835A classic bullet style exterior mirror appropriate for fitting to wing or door using two mounting holes with centres 50mm apart. FLAT mirror glass approximately 88mm in diameter.
441.41907A classic bullet style exterior mirror appropriate for fitting to wing or door using two mounting holes with centres 50mm apart. FLAT mirror glass approximately 88mm in diameter.
441.41907Replacement FLAT mirror glass for our 294 rod mounted mirror, dimensions 150mm long x 54mm tall.
441.40176Small circular clamp-on mirror. Stainless steel bracket and mirror back. 78mm diameter FLAT glass. Can be fitted without drilling, to either the quarterlight frame, or quarterlight glass pillar...
Highly polished stainless steel mirror head with simple threaded stud mount. Ball joint in back of mirror. Supplied with lock nut, domed nut and washer. High quality distortion-free FLAT mirror...
440.51395Satin finish stainless steel FLAT glass interior mirror with a chrome offset arm, as originally used on the VW T2. Mirror head measures 155mm x 60mm, mounting arm is 85mm tall with mounting...
440.51395Polished stainless steel flat glass interior mirror with chrome finish swan neck arm. Mirror head measures 118mm x 54mm, mounting arm is 80mm tall with mounting bracket 50mm x 20mm, holes centres...
440.27292Small bullet/racing mirror with single bolt fixing. All black finish. 4" 100mm diameter overall approximately. FLAT glass lens approx. 3 1/2" (90mm) diameter. M6 mounting stud supplied complete...
Black surround to mirror, chrome stem. Mirror is 120 x 55 mm and 85 mm overall height. Hole spacing is approx 39mm
Lightweight mirror. Black plastic surround to mirror, black plastic stem with self-adhesive attachment onto glass. Mirror is 120 x 55 mm and 85 mm overall height. Centre of mounting ball to pad...
A pair of 1950's style chromed wing mirrors. Round mirror head on curved arm for mounting on to the wing or door. A single M8 mounting bolt, requiring an 8mm clearance hole in the panel, on shaped...
Dash mirror on adjustable height stem, two screw, rounded swivel type base of size 58mm x 25mm. Slotted holes in base with centres between approximately 37mm and 43mm apart. Metal backed FLAT...
Polished stainless steel backed interior mirror which clamps to windscreen surround with a substantial chrome on brass swan neck bracket with stepped attachment fitting, original application early...
437.7727Quarterlight glass type clamp on stainless steel mirror. FLAT glass 118mm x 55mm, with stainless steel mirror back and straight bracket. Two screws nip the assembly to the edge of the opening...
437.7727Polished stainless steel suction interior rear view mirror. Mirror head size 128mm x 56mm, with stainless steel backing and edge rim. 62mm diameter suction pad held by traditional mirror clamp...
437.56836Superb classic chrome mirror that screws to a mounting plate that your attach to your door. Typical of the type used in late 1960's and 1970's. Ideal for many classic cars such as the Mini, MG...
437.0469Superb classic chrome mirror that screws to a mounting plate that your attach to your door. Typical of the type used in late 1960's and 1970's. Ideal for many classic cars such as the Mini, MG...
Superb classic chrome mirror that screws to a mounting plate that your attach to your door. Typical of the type used in late 1960's and 1970's. Ideal for many classic cars such as the Mini, MG...
Replacement CONVEX mirror glass for Lucas type 160 (our 395 part number) mirrors, 152mm x 75mm.
436.3472Polished stainless steel mirror head fitted with FLAT glass, 118mm x 55mm head size with single stud mounting, to fit directly into an arm - not supplied. Stud shaft diameter 6.3mm with two flats...
436.2075Polished stainless steel oval mirror head fitted with FLAT glass. Head size 144mm x 70mm with single stud mounting to fit directly into an arm - not supplied. Stud shaft diameter 6.3mm, with two...
436.2075Rounded lightweight alloy racing mirror with rim, 4" (100mm) diameter, single 7mm approx bolt fixing. FLAT glass. The base is riveted and the rim held in place with screws. Self colour. A...
Reproduction interior rear view mirror equivalent to the Lucas 308 type. Large CONVEX mirror glass - mirror head 140mm x 43mm. Elegant two screw hole base mount as shown with 40mm hole centres....
436.05002Replacement FLAT mirror glass for our 981 and 982 clamp on mirrors, dimensions 113mm tall x 72.5mm wide.
435.95697Polished aluminium racing/bullet mirror, 4" (100mm) diameter and approximately 100mm deep. Currently only available with flat glass lens held in adjustable head section, with screw adjustment....
Single stud mounted FLAT glass rear view mirror. Large mirror head 160mm x 82mm. Flat glass with chrome surround and back. Overall height 120mm. The actual arm is 75mm tall - to the mirror bolt -...
434.91132Replacement CONVEX mirror glass for our part number 514 (Desmo type 36) mirrors - glass nominal 155mm long x 75mm wide x 3mm
434.04834Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the...
433.42667Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the...
433.42667Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the...
433.42667Interior rear view mirror with a bracket suitable for fitting on to the top of round windscreen frames. 69mm x 153mm mirror glass. Please note that this mirror does not have a frame round the...
433.42667Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long....
432.6284Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long....
432.6284Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long....
432.6284Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long....
432.6284Adjustable 3/8" (10mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 240mm long....
432.6284Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long....
432.6284Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long....
432.6284Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long....
432.6284Adjustable 1/2" (12.7mm) cranked rod mirror mounting arm. Base dimensions 59mm x 22mm, with two 6.5mm approx. diameter mounting holes with centres 39mm apart. Mirror arm approximately 190mm long....
432.6284Interior rear view mirror with polished stainless steel back and adjustable vball mount in the back of the mirror case. CONVEX glass. Mirror head 127mm x 54mm. Mounting arm approximately 85mm...
432.59912We offer an extended length mirror mounting bracket arm with approximately 25mm longer reach than standard, to enable our part number CA1262 Raydyot and 653 Desmo type mirrors to be positioned...
432.04858Reproduction interior rear view mirror equivalent to the pre-War Lucas 309L type. CONVEX mirror glass. Mirror head 4” by 1 ¾” (100mm x 43mm). Two screw hole base mount as shown,...
Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 140mm x 19mm with hole centres 119mm apart. Two 9mm diameter rods connect the plate to the...
431.86316Polished stainless steel backed interior mirror which clamps to a rod of maximum 4mm diameter 153mm x 56mm mirror head with FLAT glass.
These could be carefully machined out to a bigger...
Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 95mm x 15mm with 75mm hole centres. Two 7mm rods connect the plate to the mirror head boss,...
431.07703Dash mounted Wingard 694 head pattern mirror, 2 screw base fitting 25mm x 53mm, holes 31mm centres. All chrome, metal backed FLAT glass mirror 5 7/8" x 2 3/8" (148mm x 60mm), 110mm overall height.
430.8504Interior rear view mirror with polished stainless steel back with adjusting ball socket. FLAT glass. Large 172mm x 62mm mirror head. Mounting arm approx 85mm high. Approx 105mm overall mirror...
430.70038Oval vintage mirror with polished stainless steel bracket assembly which will screw to the top rail in the vehicle. Base approx 92mm wide. FLAT mirror glass with an oval rim and back, approx 145mm...
430.70038Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Rod tapers from 5mm to 8mm
Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Rod tapers from 5mm to 8mm
Dash mounted mirror, as fitted to MGA, two screw base fitting hole centres 41mm. Chrome stem. Metal backed mirror 50mm x 125mm holding FLAT glass. Overall height 90mm.
Rod tapers from 5mm to 8mm
Vintage interior rear view mirror with polished stainless steel bracket assembly which attaches to the top rail of open/tourer cars with a screw clamp. Flat mirror glass with oval rim and back,...
430.45935Circular clip on mirror - diameter 90mm. Available in polished brass or stainless steel finish
430.30475Circular clip on mirror - diameter 90mm. Available in polished brass or stainless steel finish
Circular clip on mirror - diameter 90mm. Available in polished brass or stainless steel finish
Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred...
430.1602Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred...
430.1602Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred...
430.1602Wheel mount rear view mirror of our own manufacture, secured to the wheel with two 770mm long x 25mm wide leather straps - brown or black leather straps are available, please select your preferred...
430.1602Highly polished stainless steel finish, 2 1/2" X 6" mirror head, with chrome plated mirror arm. Perfect replica interior mirror for early Cobras and other classic applications.
429.95044Polished stainless steel clip-on mirror with circular CONVEX glass, 102mm diameter.
429.80615Round lightweight alloy racing mirror. 4" (100mm) diameter, 90mm deep, single bolt fixing at base. FLAT glass.
428.58047Round chrome plated racing mirror. 4" (100mm diameter), 90mm deep, single bolt fixing at base. FLAT glass.
428.58047New unused original stock part of the Rallye classic outside mirror. Manufactured by Vitaloni of Italy. This mirror is for LEFT side of vehicle mounting only and it will not transpose to mount on...
428.47244Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
427.95914Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
427.95914Dash mounted chrome mirror, original application Jaguar XK120. FLAT glass lens 113mm x 39mm, retained with top and bottom retaining lugs to plated back - the egde of the glass is NOT protected....
427.95914Interior rear view mirror with stainless steel head and chrome stem as fitted to MGA etc. FLAT glass, head size approx 130mm x 57mm, with stainless steel outer edge protection. Mounting stem base...
427.95914Face mounting larger type vintage interior mirror. FLAT glass 125mm x 66mm which has an attractive bevelled edge. The shaped/embossed mounting bracket (92mm wide) attaches to a bracket, which...
427.95914Rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 120mm x 56mm. Suction pad 53mm diameter.
427.85037Large rectangular suction mirror, FLAT glass, with swivel adjustment. Black plastic back and surround 156mm x 68mm. Suction pad 53mm diameter.
427.85037Face/top rail mounting larger type vintage interior mirror with upper lip on bracket. FLAT glass 125mm x 65mm, with an attractive bevel edge and shaped ends. The mounting bracket is triangular...
427.394Original new/old stock Wingard 702A interior mirror, oblong FLAT glass (150mm x 60mm) mounted in a black crackle finish frame, stem length to the ball centre 70mm, with 31mm fixing hole centres.
426.97733Suction mirror for interior use. Fitted to windscreen with suction cup. FLAT glass, stainless steel back and edge rim. Head size 156mm x 63mm.
426.93127Oval mirror with jointed arm. Fine reproduction of the very popular Raydyot M39 mirror. Head size 110mm x 82mm, fitted with a Raydyot Made in England badge, supplied with CONVEX glass fitted for...
426.7138Interior FLAT glass mirror on stalk. Stainless steel rim and backing with chrome plated mounting. Large head size 154mm x 62mm, overall height approx 95mm. Base 58mm x 16.5mm with 38mm mounting...
426.39392A nice, neat FLAT glass vintage interior mirror with shaped glass with a bevel edge. Glass size 126mm x 65mm. The glass is held at the top and bottom with a traditional stainless steel clamp which...
426.39392Chrome finish, clamp to door frame edge, stainless steel exterior mirror. FLAT glass head 112mm diameter, on an arm approx 135mm long. Adjustment to mirror head angle is achieved by slackening a...
426.17786Rectangular chrome on brass rear view mirror with cast, chrome on bronze triangular mounting bracket, popular on some early MG models. CONVEX glass, Rear of mirror head case stamped Desmo...
425.9372Wing mounted bullet/racing mirror, polished alloy, 4" (100mm) diameter with CONVEX glass. Aerodynamically styled, fully adjustable and vibration free. 110mm long with two bolt base of dimensions...
425.18613Black plastic interior mirror, head size 125mm x 55mm. With chrome on brass clamp for clamping to a rod of maximum 5mm diameter - not supplied. 36mm from rod mounting hole to centre of ball...
424.4247Round mirror with long, curved mounting arm. 4" circular polished stainless steel mirror head with 140mm long curved chrome arm. Adjustable mounting bracket. For mounting on the left or right hand...
Large racing mirror with a long matt black base and body. 4" (102mm diameter) and 120mm long overall. Base dimenstion 93mm x 27mm with two fixing holes with centres 50mm apart. Supplied complete...
Right side fitting stainless steel door mounted bullet mirror. CONVEX glass. Bullet racing mirror with universal fitment, designed for door mounting as on early Minis and many other classic and...
421.16943Left side fitting stainless steel door mounted bullet mirror. CONVEX glass. Bullet racing mirror with universal fitment, designed for door mounting as on early Minis and many other classic and kit...
421.16943Classic rod mounted (not supplied) interior mirror. Fits on the centre strut on early MGBs though can also be used on Jaguar E Types and some Cobras.
4.6mm rod hole, could be machined to...
Good quality clamp on mirror long shtraight chrome finish arm and 3" diameter polished stainless steel head. Designed to fit on the front edge of a door. Mounting arm 143mm long. Supplied with...
419.6042Good quality clamp on mirror long straight chrome finish arm and 4" diameter polished stainless steel head. Designed to fit on the front edge of a door. Mounting arm 143mm long. Supplied with...
Pillar mounted spotlamp with rear view mirror made to original Raydyot HS495 patten. Chrome on brass. Pillar mounted on adjustable mounting arm and bracket. Lamp 112mm diameter x 93mm deep, mirror...
419.6042Wing mirror (our part number 651 - equivalent to Lucas type 406) base gasket. Tear drop shape, 42mm long x 32mm wide with a 10mm hole, will accept a mirror with a 36mm x 26mm footprint.
384.86203Large circular clamp on mirror. Stainless steel bracket and mirror back, 4 1/4" (107mm) convex glass. This mirror can be fitted to quarter light frame, or a quarter light glass pillar gutter...
Superb reproduction of the very popular 'Raydyot' oval mirror with single hole fixing. Chrome on brass finish. Mirror head approx 110 by 82mm. Fitted with our unique single hole fitting stud for...
Chromed alloy racing/bullet mirror. A reproduction of the Raydyot "Grand Prix" style model, popular on Cobras and many racing cars. The FLAT mirror glass is approx 3 1/2" (90mm) diameter. The...
376.55872A lightweight alloy racing mirror. A reproduction of the Raydyot "Grand Prix" style model, popular on Cobras and many racing cars. The FLAT mirror glass is approx 3 1/2" (90mm) diameter. The...
Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket,...
375.70453Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket,...
375.70453Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket,...
375.70453Oval mirror with jointed arm. Fine reproduction of this very popular mirror. Head size 110mm x 82mm, fitted with a CONVEX glass for ease of overtaking, concave base on two hole fixing bracket,...
Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
375.5742Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
375.5742Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
375.5742Wing mounted mirror equivalent to the Lucas 406 model; an early mirror that remained extremely popular for many years. Ball joint mounted 4 3/16" (106mm) diameter stainless steel mirror...
375.5742A very lightweight alloy mirror with a black base. This is a reproduction of the "Radyot" "Grand Prix" style model, popular on Cobras and many racing cars. The FLAT mirror glass is approx. 90mm...
375.3352A lightweight BLACK coated, alloy racing mirror. A reproduction of the Raydyot "Grand Prix" style model, popular on Cobras and many racing cars. The FLAT mirror glass is approx 3 1/2" (90mm)...
Polished stainless steel FLAT glass interior mirror with a chrome offset arm, originally early VW applications. Mirror head measures 155mm x 60mm, mounting arm is 175mm tall with a 'shield' shaped...
374.6122Dash mounted interior mirror with single bolt fixing and CONVEX mirror glass. Mirror head 110mm x 65mm. Chromium plated finish, 120mm overall mirror height. Early 'Desmo' pattern, stamped Desmo on...
353.11795Replacement CONVEX mirror glass for Desmo 248 and 300 type dash mounted mirrors - our part number 891 and 891A mirrors.
347.1849Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
341.0183Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
341.0183Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
341.0183Adjustable knuckle type mirror arm. Base dimension 65mm x 18mm, with mounting holes at approx 42mm centres. Arm diameter 7/16" (11mm). Arm length 165mm long approx. Solid brass construction,...
341.0183Triangular mirror mounting bracket, similar to the Lucas style mount used on some MG's. Flat base plate 95mm x 15mm with 75mm hole centres. Two 7mm rods connect the plate to the mirror head boss,...
340.97638Vintage interior rear view mirror with polished stainless steel bracket assembly which attaches to the top rail of open/tourer cars with a screw clamp. Bevel edge flat mirror glass approximately...
340.32764A vintage interior rear view mirror that clamps to the top rail of an opening windscreen, to be held in place by screw clamps. Once the mirror has been clamped in place, it is possible to adjust...
339.8136Oval type convex glass mirror equivalent to the Desmo 263 model. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of the mirror case. Suitable for vehicles of the...
339.18454Oval type convex glass mirror equivalent to the Desmo 263 model. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of the mirror case. Suitable for vehicles of the...
339.18454Oval type convex glass mirror equivalent to the Desmo 263 model. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of the mirror case. Suitable for vehicles of the...
339.18454Oval type convex glass mirror equivalent to the Desmo 263 model. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of the mirror case. Suitable for vehicles of the...
339.18454Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete...
338.93274Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete...
338.93274Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete...
338.93274Oval mirror equivalent to the Desmo 263 model. Back of mirror casing embossed Desmo. CONVEX mirror glass. Suitable for vehicles of the '30's. Head size 110mm x 82mm, overall length 175mm. Complete...
338.93274Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction,...
338.8387Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction,...
338.8387Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction,...
338.8387Round mirror, 4 3/4" (120mm) in diameter, stamped Desmo on rear of case. Supplied with convex glass only as original. Fitted with a 3/8" (10mm) mounting clamp as standard. All brass construction,...
338.8387Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
338.831Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
338.831Reproduction of the vintage pre-war Desmo 248 mirror pattern, with convex bevel edged glass. Mirror head size 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusting fully on the hinged mounting...
338.831Heavy veteran or Edwardian pattern mirror of the style manufactured by Toby. Flat mirror glass with heavy rim and backing. Head 144mm diameter. Substantial arm approximately 270mm long with very...
337.87274Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of...
337.54Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of...
337.54Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Cast bronze Desmo medallion (finished as the mirror body) riveted to the back of...
337.54Small veteran or vintage pattern mirror. Flat of convex mirror glass (please select below) with heavy rim and backing. Head 100mm diameter. Back of head fitted with two piece brass boss that is...
337.28278Oval type exterior mirror with flat glass suitable for vehicles of the '30's Long head size -128mm x 81mm and overall length of 196mm. Complete with concave base mounting bracket 58mm x 14mm, hole...
337.07236Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel...
337.07236Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel...
337.07236Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel...
337.07236Larger round mirror, 5 5/8" (145mm) in diameter, stamped Desmo. Supplied with either convex or flat glass. Fitted with a 1/2" (12.7mm) mounting clamp as standard. Available chromium or nickel...
337.07236Dash mirror on adjustable height stem, as fitted to the Jaguar XK140. Fixed, rectangular two screw base size 51mm x 21mm with mounting holes at 31mm centres, angled away from the screen. Metal...
337.07236A large circular rear view mirror 5 1/2" (140mm) in diameter. A splendid reproduction of a large windscreen pillar mounted, early motoring mirror. Fitted with a convex glass lens the unit...
337.06064A large circular rear view mirror 5 1/2" (140mm) in diameter. A splendid reproduction of a large windscreen pillar mounted, early motoring mirror. Fitted with a convex glass lens the unit...
337.06064A large circular rear view mirror 5 1/2" (140mm) in diameter. A splendid reproduction of a large windscreen pillar mounted, early motoring mirror. Fitted with a convex glass lens the unit...
337.06064Wing mounting racing mirror, chrome plated, 4" (100mm) diameter. An aerodynamically styled bullet/racing mirror. Fully adjustable and vibration free. 110mm long, two bolt base of dimensions...
336.75754Wing mounting racing mirror, chrome plated, 4" (100mm) diameter. An aerodynamically styled bullet/racing mirror. Fully adjustable and vibration free. 110mm long, two bolt base of dimensions...
336.75754Wing mounting racing mirror, chrome plated, 4" (100mm) diameter. An aerodynamically styled bullet/racing mirror. Fully adjustable and vibration free. 110mm long, two bolt base of dimensions...
336.75754Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
336.52145Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
336.52145Reproduction pre-War Desmo 300 type telescopic interior mirror, with CONVEX glass. Mirror head 4" x 1 3/4" (100mm x 42mm) with backing plate, adjusts fully on hinged mounting bracket and is...
336.52145Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the...
335.82703Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the...
335.82703Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the...
335.82703Brass rectangular CONVEX glass mirror. Case 6 1/4" x 3 1/4" (155mm x 80mm) with central rear mounting clamp. Reproduction of a popular style of period mirror produced by Raydyot and Desmo (the...
335.82703Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Round shape mirror head. 107mm diameter stainless steel mirror head offered with either CONVEX or FLAT glass. Offered with a choice of four designs of chrome stem - please make your selection...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Swing back mirror with tapered mirror head shape. 113mm x 102mm stainless steel head. Supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your...
335.8081Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass...
335.54306Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass...
335.54306Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass...
335.54306Small round spun brass mirror. Back of case stamped Desmo. 104mm diameter, flat or convex glass. Fitted with 3/8" (10mm) mounting clamp. Available nickel or chrome plated, or polished brass...
335.54306Small veteran or vintage pattern mirror of the style manufactured by Toby. Flat or convex mirror glass (please select below) with heavy rim and backing. Head 100mm diameter. The back of the head...
334.7393Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent...
334.41138Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent...
334.41138Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent...
334.41138Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent...
334.41138Exterior rear view mirror equivalent to the original Lucas Type 160 mirror. Also very similar to the Eversure No.31 model. 6" x 3 1/4" (152mm x 82mm). CONVEX glass only providing an excellent...
334.41138Large round rear view mirror suitable for the smaller Edwardian car. Flat type arm clamps to the windscreen frame, optimum diameter to clamp to approx 25mm. 5" (128mm) diameter head, offered with...
333.8749Large round rear view mirror suitable for the smaller Edwardian car. Flat type arm clamps to the windscreen frame, optimum diameter to clamp to approx 25mm. 5" (128mm) diameter head, offered with...
333.8749Large round rear view mirror suitable for the smaller Edwardian car. Flat type arm clamps to the windscreen frame, optimum diameter to clamp to approx 25mm. 5" (128mm) diameter head, offered with...
333.8749'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001'Oval' mirror head shape, 126mm x 85mm. Stainless steel head supplied with CONVEX glass only. Offered with a choice of four designs of chrome stem - please make your selection below. All four arms...
333.4001