Complete Automobilist

Orderline: +44 (0)1684 219864

£GBP
  • Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.

  • Vat is applicable to all UK orders.
    Vat is also applicable to EU orders unless supported by a Valid EEC Vat number entered in your Account details (or when checking out). THIS WILL BE CHECKED WHEN ORDERS ARE PROCESSED.

Oil Cans, Jugs, Funnels & Syringes

Store
Product Image

942-oil - Side lever oil gun - With tubes and 4 jaw connector for hydralic nipples

From £57.68 (£69.22 inc. VAT @ 20%)

Side lever type pressure gun for oil application. Supplied with standard 4 jaw connector/end fitting attachment for modern hydraulic nipples. Cranked rigid connector tube and flexible connector...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

CA855 - Small brass oil syringe - New old stock

From £67.64 (£81.17 inc. VAT @ 20%)

Small brass oil syringe for topping up the oil in your gearbox or rear axle etc. Approx 25mm diameter x 215mm long (overall 247mm). Offered with two spouts. New old stock, will show signs of age....

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

290 - Medium brass oil syringe - T handle, straight tube

From £75.48 (£90.58 inc. VAT @ 20%)

Medium brass oil syringe with short spout and T handle. An invaluable tool for anyone whose car has an awkward to get at gearbox or rear axle filler. Body 35mm diameter x 193mm long, overall...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

CA854 - Large brass oil syringe - T handle, cranked tube

From £126.23 (£151.48 inc. VAT @ 20%)

Large brass oil syringe with long spout and T handle. An invaluable tool for anyone whose car has an awkward to get at gearbox or rear axle filler. Body 40mm diameter x 340mm long, overall length...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

942CAN1 - Oil can - Steel, 500ml capacity

From £6.45 (£7.74 inc. VAT @ 20%)

Good value steel bodied, red painted oil can. All metal pump mechanism, supplied with rigid and flexible spout, 500cc capacity. Can dimensions:- 120mm tall, 85mm diameter, metal spout 165mm long,...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

942CAN2 - Oil can - Premium, aluminium, 500ml capacity

From £35.75 (£42.90 inc. VAT @ 20%)

Premium aluminium oil can with swivel pump. Newly developed, high quality brass double pump mechanism with angled rotating swivel, making oiling in every position possible. 500cc capacity....

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

COIL500 - Castrol oil can - 500ml

From £11.69 (£14.03 inc. VAT @ 20%)

The classic Castrol oil applicator. Pump action screw top can, with interchangeable fixed and flexible applicators.

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

CJUG-P - Castrol pouring jug - Pint

From £10.95 (£13.14 inc. VAT @ 20%)

Castrol pouring jug - For accurate measurement of lubricants as shown in your vehicle handbook. One Pint (568ml) capacity

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

CJUG-Q - Castrol pouring jug - Quart

From £13.25 (£15.90 inc. VAT @ 20%)

Castrol pouring jug - For accurate measurement of lubricants as shown in your vehicle handbook. One Quart (1136ml)

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

456-1LTR - Oil measure can - 1 litre, flexible spout

From £22.66 (£27.19 inc. VAT @ 20%)

One litre capacity high quality tin plate oil measuring jug, very stable with anti surge top and flexible spout. Dimensions 230mm tall, 90 mm diameter, flexible spout 220mm long. Suitable for...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

456-2LTR - Oil measure can - 2 Litre, rigid spout

From £22.45 (£26.94 inc. VAT @ 20%)

Two litre high quality tin plate oil measure. Very stable with anti surge top and funnel shaped spout. Dimensions 280mm tall, 112 mm diameter, spout 65mm long.

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes
Product Image

456-Funnel - Funnel with strainer - Removable nozzle and strainer gauze

From £22.45 (£26.94 inc. VAT @ 20%)

High quality tin plate funnel with 0.7mm strainer. With handle and removable straight nozzle, strainer held in place with a spring ring and can be removed to be cleaned. Dimensions 260mm tall,...

Vintage Car Parts - Oil System & Lubrication - Oil and Grease Application - Oil Cans, Jugs, Funnels & Syringes