Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
1182.623Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
1182.623Powerful, robust, silent 12 volt wiper motor with 110 degree sweep, which will drive any wiper set. Mounting hole 10mm, shaft size 6mm, matt black plastic cover with switch built in. Shaft length...
1182.623Trico vacuum wiper motor, small size - 100mm wide, 57mm high, 50mm deep, 1/4" shaft, 27mm long beyond plastic spacer including threaded (8mm diameter) section 9mm long. 2mm hole in end of shaft....
1171.3535CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
1170.3214CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
1170.3214CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
1170.3214CAV wiper motor, 6 volt and 12 volt stocked with inbuilt on/off switch on end, 24 volt usually stocked without switch. Good quality 'new old' stock. Black finish. Approx 125mm overall length....
1170.3214Lucas CWX type wiper motor spindle. Made from brass. 165mm long, 5mm diameter, 6mm long threaded section at one end, three cross holes 1.5mm diameter at 20mm, 34mm and 88mm from the threaded...
991.46436Crome finished die cast lever arm for rear of Lucas CWX type wiper motor case. 36mm long arm with locating pin in end. 27mm total depth, 5.25mm bore through spindle, with 6mm counter bore 9mm deep...
991.4111Carbon brush with copper wire connection for Lucas type CWX wiper motors. 11mm x 5mm x 4.25mm
989.3901Practical modern wiper motor for continual use. 6 volt. Polished stainless steel cover, will 'auto-park' to one side. Central drive offtake (6mm), requires 8.7mm shaft hole through screen, with...
989.2647Practical modern wiper motor for continual use. 12 volt. Polished stainless steel cover, will 'auto-park' to one side. Central drive offtake (6mm), requires 8.7mm shaft hole through screen, with...
988.67377Plastic spacer for Lucas CWX type motors. 48mm long x 19mm wide with radiused corners, 6.5mm thick. Two mounting holes 4.75mm diameter, 39mm between centres. Central hole 10.5mm diameter. All 3...
983.60065Cork spacer/gasket for Lucas CWX type motors. 48mm long x 19mm wide with radiused corners, 3mm thick. Two mounting holes 4mm diameter, 39mm between centres. Central hole 6.5mm diameter. All 3 hole...
983.60065Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
954.8656Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
954.8656Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
954.8656Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
954.8656Practical modern wiper motor for continual use, 6 volt or 12 volt. Dull black plastic cover. On/Off switch with 'auto-park'. Central drive offtake 6mm. Requires an 9mm shaft hole through screen,...
954.8656Re-manufactured replacement armature for Lucas wiper motor CW1, CWH and CWX type units, as used on many vintage and immediate post war vehicles. Dimensions - overall height 50mm, splined drive...
944.46075Re-manufactured replacement armature for Lucas wiper motor CW1, CWH and CWX type units, as used on many vintage and immediate post war vehicles. Dimensions - overall height 50mm, splined drive...
944.46075Re-manufactured replacement armature for Lucas wiper motor CW1, CWH and CWX type units, as used on many vintage and immediate post war vehicles. Dimensions - overall height 50mm, splined drive...
944.46075Wiper motor stop plate as fitted to CW1, CWX and CWH screen mounted wiper motors, restricts wiper arm sweep. Made from 2.4mm thick powered coated steel, face plate 63mm wide x 18mm tall with two...
789.169563 x 1/4" diameter stud wiper motor fixing for Lucas CR and CRT wiper motors. Equivalent to Lucas part number 741583, overall dimensions 53mm at widest x 75mm long.
Small spring used in Lucas CWX type wiper motors - 3.6mm OD, 12mm free length, 0.3mm wire diameter.
779.5261Large spring used in Lucas CWX type wiper motors - 6.4mm OD, 34mm free length, 0.6mm wire diameter.
779.5261Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
775.7926Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
775.7926Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
775.7926Wiper motor, equivalent to Lucas type CW1 and CWX type. 6 and 12 volt. As fitted to many early cars for mounting on to windscreen frame. Only 6 volt currently available - which can be fitted on...
775.7926Plastic spacer for Lucas CWX type motors complete with metal spindle tube. 48mm long x 19mm wide with radiused corners, 13mm thick. Mounting holes 4.75mm diameter with counterbore recess 6.25mm...
767.14026Chrome on prass cover plate for CWX wiper motors. Fits over twin mounting studs and central spindle. 5.4mm diameter mounting stud holes (38mm between centres), 6.0mm diameter central spindle hole...
764.2472Toggle switch for two-speed wiper with park position. This is an OFF-ON-ON type switch.Ideal for use with Lucas type wiper motors with a park function. Requires a 14.5mm hole in the panel (2.5mm...
Slave/idle wiper arm pivot, shaft size 3/16" diameter, bolts through 8mm hole in screen, for use with centre drive dual/tandem wiper sets. Chrome plated as standard, though we also offer nickel...
550.2457Stainless steel and chrome finished hand operated windscreen wiper arm and blade. Requires 1/4" (6mm) hole for mounting (handle detaches), 240mm long flat blade.
511.07056Stainless steel tandem wiper link bar kit, ideal for operating two wiper arms/blades if only one wheel box is powered. Existing wiper arms need to be drilled, fitting the brackets with rivets...
511.07056Lucas type 79SA wiper switch. Off / on / on 2 speed for early DR3 type motors. The park is in the switch .
487.96017Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet...
484.97443Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet...
484.97443Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet...
484.97443Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet...
484.97443Rubber peg to secure slot type wiper blades to wiper arms.
452.882Adaptor to enable the fitting of a spline shaft wiper arm on to a shaft. Secures with a pinch bolt. Dimensions 20mm tall with a 19mm diameter base, central bore 6mm (7/32"), 13.6mm spline.
452.42316Two speed wiper switch for self parking motors. Lucar type 6.3mm spade connections.
441.18475Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please...
416.4866As drawing, black, 6mm spindle hole, approx 11mm circular panel hole.
413.05313As drawing, black, 6mm spindle hole, 13mm approx. circular panel hole.
413.05313As sketch, black, 6mm spindle hole, 15mm approx. circular panel hole. Equivalent to Lucas part number 729313
As sketch, black, 6mm spindle hole, 20mm approx. circular panel hole.
413.05313As sketch, black, 6mm spindle hole, 13mm approx circular panel hole.
413.05313As sketch, black, 4.5mm spindle hole, 20mm approx. circular panel hole.
413.05313As sketch, black, 6mm spindle hole, 15mm approx. circular panel hole. Equivalent to Lucas part number 734652
Stainless steel wiper arm to fit 1/4" diameter shafts with a nice, substantial clamp that tightens with an allen key socket bolt. Adjustable in length 6" to 8", to fit wrist type wiper blades.
410.23685Tandem wiper assembly, chrome of nickel plate finish, of the pre-war pattern, with the tightening nut forward (to front). Arms adjustable 125mm to 190mm in length and will fit 3/16" or 1/4"...
402.0278Double arm, driven at end, tandem wiper assembly. Post war pattern (tightening nut at rear (to back) offered in chrome finish only. Arms adjustable 125mm to 190mm long. Link bar adjustable from...
402.0278Stainless backed flat wiper blade, length 275mm (11"), slide-on type for 5.5mm maximum width flat arm, secured with a screw through the top, chrome plated casting. Can be shortened easily.
402.0278Stainless backed flat wiper blade, length 250mm (10"), slide-on type for 5.5mm maximum width flat arm, secured with a screw through top, chrome plated casting. Can be shortened easily.
402.0278Black vacuum wiper system tubing, 1/8" (3.25mm) ID x 5/16" (8mm) OB with fine ribs.
397.656Chrome plated adjustable wiper arm to fit standard 13.6mm spline drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjusts from 225mm to 265mm long. Supplied...
392.70877Rubber 'duck's foot' peg with triangular flap, to secure slot type wiper blades.
Angled as sketch, black, 6mm spindle hole, 13mm x 16mm approx. OVAL panel hole.
341.30212Angled as sketch, black, 6mm spindle, 12mm x 17mm approx. OVAL panel hole.
341.30212Angled as sketch, black, 6mm spindle, 15mm approx. wide panel hole, cut on angle.
341.30212Angled as sketch, 6mm spindle hole, 16mm approx. diameter panel hole.
341.30212Angled as sketch, black, 6mm spindle hole, 17mm x 19mm approx oval panel hole. Equivalent to Lucas part number 733874
Angled as sketch, 6mm spindle hole, 16mm x 22mm oval panel hole.
341.30212Dimensions as sketch. Black, 6mm spindle hole, 24mm x 29mm approx oval panel hole.
341.30212Angled as sketch, black, 6mm spindle hole, 17mm approx panel hole. Equivalent to Lucas part number 735679
Angled as sketch, black, 6mm spindle hole, 15mm x 24mm approx oval panel hole.
341.30212As drawing, black, 10mm hole for spindle, approx. 11mm circular panel hole.
341.30212Moulded part, 8mm inner hole, 13mm outer neck, 22mm base diameter. Ford part number 7W-17515.
Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner...
330.27682Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner...
330.27682Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner...
330.27682Slot type wiper blade for flat screen. Stainless steel back. *** Please note these are the 'hook in' type blade - they do not use a rubber peg to secure them to the arm, the hook holds the blade...
330.27682Slot type wiper blade for flat screen. Stainless steel back. *** Please note these are the 'hook in' type blade - they do not use a rubber peg to secure them to the arm, the hook holds the blade...
330.27682Slot type wiper blade for flat screen. Stainless steel back. *** Please note these are the 'hook in' type blade - they do not use a rubber peg to secure them to the arm, the hook holds the blade...
330.27682Slot type wiper blade for flat screen. Stainless steel back. *** Please note these are the 'hook in' type blade - they do not use a rubber peg to secure them to the arm, the hook holds the blade...
330.27682Slot type wiper blade for flat screen. Stainless steel back. *** Please note these are the 'hook in' type blade - they do not use a rubber peg to secure them to the arm, the hook holds the blade...
330.27682Flat screen wiper blade, stainless steel backed with 5.2mm wide bayonet fitting for wiper arm. 10" (250mm long) - can be cut down in length.
330.27682Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
330.27682Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
330.27682Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
330.27682Slot type wiper blade for flat screens. Stainless steel back. Use rubber peg 372 or 372A to secure these blades on to slot fitting wiper arms. Available in the following lengths - 200mm (8"),...
330.27682Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable...
330.27682Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable...
330.27682Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable...
330.27682Bayonet type fitting blade for 5.2mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 5.2mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 5.2mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 7mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 7mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 7mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 7mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Bayonet type fitting blade for 7mm wide wiper arm for curved windscreens. Stainless steel ONE PIECE back with rubber wiper.
330.27682Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist (or spoon) type fitting blade, sometimes refered to as the 'rainbow' type, for curved windscreens. Stainless steel back with sprung rubber wiper. Available in the following lengths 200mm,...
320.9578Wrist type wiper blade for flat screen, equivalent to Trico P1000 pattern. Stainless steel backed blade for wrist (or spoon) fitting arms. 250mm long blade, that can be cut down in length if...
320.9578Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
282.33124Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Bayonet type fitting blade (for 5.2mm or 7mm wide wiper arm) for curved windscreens. SPRUNG stainless steel back with sprung rubber wiper. Normally offered from stock in the lengths listed.
Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot...
250.15842Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot...
250.15842Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot...
250.15842Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot...
250.15842Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot...
250.15842Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
250.15842Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
250.15842Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
250.15842Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
250.15842Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
247.93481Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
247.93481Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
247.93481Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A)....
247.93481Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths:
A -...
Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths:
A -...
Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths:
A -...
Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths:
A -...
Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for fog lights, wiper motors or any universal use.
98.15468Quickly mounts to under dash flange on most cars. Heavy duty 50 amp toggle switch with chrome handle. Use for indicator, fog lights, wiper motors etc. Universal use.
98.15468Plastic washer bottle kit with built in 12 volt pump with mounting bracket. 170mm tall (185mm including cap) x 140mm wide x 70mm deep, mounting bracket 60mm wide tapering to 45mm wide, 69mm tall....
85.4827Single jet, small (8mm diameter), chrome plate. Requires 4.65mm hole through metal panel, pipe connection 3.5mm. Equivalent to Lucas WSB136 type jet.
85.4827Double jet, nickel plated. Approximate 13mm diameter. Requires 7.7mm hole through metal panel, pipe connection 4.5mm. Equivalent to Lucas WSB131 type jet.
85.4827Windscreen washer pump, manual push black plastic button, dimensions 80mm overall length, 42mm diameter at widest point (rear flange), main body 34mm, 15mm diameter mounting boss thread. Will fit...
Clear plastic windscreen washer system tube - 6.25mm OD and 3.75mm ID. Sold by the metre.
85.4827Larger capacity plastic washer bottle kit with built in 12 volt pump with mounting bracket. 180mm tall (190mm including cap) x 120mm wide x 100mm deep, mounting bracket 65mm wide and 75mm tall...
85.4827Windscreen washer accessory kit – two black double/twin washer jets, a tee piece, a straight connector, 1.8m plastic tube, a wiring loom, push switch, clips for the tube, a bracket, bolts...
85.4827