Klaxon horn The wonderful traditional sound of a Klaxon OOOOO-HA. Chrome Trumpet. Very loud at 110db. Universal 12V application. These are by far the best quality Klaxons on the market in...
Parts
Klaxon horn The wonderful traditional sound of a Klaxon OOOOO-HA. Chrome Trumpet. Very loud at 110db. Universal 12V application. These are by far the best quality Klaxons on the market in...
Klaxon horn The wonderful traditional sound of a Klaxon OOOOO-HA. Red Trumpet. Very loud at 110db. Universal 12V application
AUDIBLE WARNING BUZZER 12 volt. Another reminder for indicators!
12V windtone horns with high and low notes. Black plastic body with chrome grilles and covers. 90 mm diameter body. Supplied with mounting brackets, screws, nuts, relay and instructions. Emarked....
High quality 12 volt all black disc horn. 75mm diameter with mounting bracket and 8mm clearance hole.This horn has two terminals so the body of the horn is insulated, making it suitable for 12...
6 Volt Horn - black with chrome ring, attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm mounting hole
12 Volt Horn - black with chrome ring attached by 6 screws, 105mm diameter, 12 volt, 2 x 6.3mm spade/Lucar terminals, ‘E’ marked. Complete with mounting bracket drilled with 8.5mm...
High quality 12V horn made by Klaxon in France. Gloss black finish. KW9 model (CH5070105, 722367). 92mm body diameter, 67mm total depth including front central spigot and rear mounting bolt....
A quality reproduction single twist motor bugle horn used on a number of early cars and motorcycles. Approximately 16" long overall, supplied with rubber horn bulb and gauze over front grill...
Reproduction bell fronted, curved brass horn for vintage cars and bicycles. 8" turn diameter. 2 3/4" bell diameter, 15" overall length ingluding horn bulb. 4" horn bulb diameter. 2 1/2" long,...
Reproduction bell fronted, straight brass horn. Very similiar to the Lucas No.40, Desmo No.13 and Stadium No.112D motorcycle horns. 4" diameter horn bulb. 14" overall length. 2" long, 11/16"...
Boa-Constrictor Horn plaque - black printed on brass. marked Boa-Constrictor Horn, licensed under Brit. patent no 27746/07, picture of snake and 'British Manufacture'. Measures 51mm x 26mm. A nice...
medium sized black rubber horn bulb 90mm diameter, brass ferrule, 15mm hole (can be enlarged easily)
this rubber horn bulb can have the open end opened out if too small using a rough round...
this rubber horn bulb can have the open end opened out if too small using a rough round...
Large sized, ribbed black rubber horn bulb 115mm diameter, brass ferrule, 15mm hole. This rubber horn bulb can have the open end opened out if too small using a rough round file. it has a...
small size, black rubber horn bulb, 69mm diameter, brass ferrule, 16mm hole. particularly suitable for motorcyle horns.
Flexible self colour brass conduit tube. Measures 15.3mm outside x 12.5mm inside. We cut this off the roll. Price per metre.
Reproduction of the Lucas No.38 double twist motor bugle horn. Approx 500mm long overall, supplied with rubber horn bulb, mounting bracket and gauze over front opening. Very similar to that fitted...
Large snake head (serpent head) horn/trumpet. Overall length of this reproduction item is approx 1750mm. The serpent head is pressed (not a casting), has glass eyes and fork tongue, and the taper...
Large snake head (serpent head) horn/trumpet. Overall length of this reproduction item is approx 1750mm. The serpent head is pressed (not a casting), has glass eyes and fork tongue, and the taper...
High quality, British made, taper brass flexible horn tube - for repair of Boa Horns. 1500mm long. Inside diameters - 59mm large end for solder connection to boa head, 16.5mm small end for solder...
Large snake head (serpent head) horn/trumpet. Overall length of this reproduction item is approx 1750mm. The serpent head is pressed (not a casting), has glass eyes and fork tongue, and the taper...
A modern variation of the traditional 'bull horn', making plenty of noise (115db). The robust electric 12 volt, 8amp horn is operated by a control lever in the cockpit. This is quite a large unit...
Surface mounted, metal cased push button. Suitable for horn press button etc. Mounting hole centres 53mm, chrome rim approx 41mm diameter, black button.
Rubber horn bulb (black rubber), approx. diameter 93mm with 16mm dia. hole. brass ferrule. this rubber horn bulb can have the open end opened out if too small using a rough round file. it has a...
Horn push button engraved 'Klaxon'. Flange for mounting on to dash. Button head approx. 38mm dia. Mounting flange 53mm x 35mm with two screw holes.
Large and noisy 12 volt electric horn. Approximately 150mm diameter x 90mm deep (front to back). Chrome grill, mounting arm supplied.
Small 12 volt electric horn with chrome grill. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket
Small 6 volt electric horn with chrome grill. Approximately 100mm diameter and 55mm deep. Single hole fixing bracket.
Prices shown include VAT @ 20% where applicable
