H4 P43T headlamp socket ceramic connector. 21mm high, 27mm wide and 24mm long. High performance connector with 10cm long blue white and black cable tails.
MCC/BA9s bulb holder. 12.3mm diameter, overall length 18.5mm, useful general application spare for bayonet base 9mm cap equal pin bulbs. single contact, supplied with connectors and terminals.
Compact bulb holder for 39mm long festoon bulbs with spade connections and central mounting hole. 6.3mm spade connections at either end. Compact plastic body 17mm wide x 50mm long (excluding...
Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...
Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...
Double contact BA15D bulb holder plug with solder connections - two part assembly (unscrews). To wire up, unscrew the body, push the brass connectors from the bakelite body, pass wires through the...
Double contact, double ended SBC/BA15D bulb holder insert. Four spring loaded brass contacts allow it to be adapted for various applications. Overall length 27mm, insulator 11mm long x...
Double contact bulb holder insert, fits our 422 bulb holder, two spring loaded brass bulb contacts at one end with two wire terminals at the other, insulator body dimensions 16mm long x 16.7mm...
Compact bulb holder for 42 to 44mm long festoon bulbs with spade connections and central mounting hole. 6.3mm spade connections at either end. Compact plastic body 17mm wide x 50mm long (excluding...
Spring clip mounted single contact bulb holder to hold MES E10 (11mm globe diameter) 2.2W screw in bulb (B987) as back light for instrument gauges. 6 spring clips push in to a 16mm diameter hole....
High quality fibre board and copper contact British Pre-focus bulb holder/contact plate for Lucas 576 type spot and fog lamps (e.g. SLR and SFT576). Single contact, with wire tails and bullet...
Comparable to other manufacturer part numbers - 54520352
Double contact headlamp converter for most many headlamps which are mounted through the rear of reflector bowl - usually held in place in the bulb holder socket on Lucas reflectors with clamp clip...
Standard plastic H4 headlamp socket. 219mm high, 26mm wide and 21mm long. Supplied with three brass flag terminals for crimping on to wire and connecting to male Lucar/spade terminals
Original pattern side light bulb holder for our 1142S lamps, equivalent to the original Lucas 1142 type side lamp. Takes bulb part numbers B205 (6V) or B207 (12V). Each bulb holder.
Modified bulb holder for Lucas 1142 type lamps including the new 'Toby' 1142S. Double contact 1158/SBC/BA15D holder. Takes incandescent bulb part numbers B383 (6V) or B381 (12V) for a 5W side...
This BAY15D male socket connector, fitted with three 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.
Converted bulb holder for 1142S lamps. Provides a side light and indicator conversion for lamps equivalent to the original Lucas 1142. Takes capless bulbs, part numbers B501 and B921A (12V only).
This BA15S male socket connector, fitted with two 10cm wire tails, allows you to create a DIY wiring connection between your conventional bulb holder socket and LED clusters.
High quality bakelite bulb holder for FT700 and CLR700 light units. Double contact, but one contact can be bent away to make single contact. 71.5mm OD, screw on, min ID 38.5 max ID 45mm
Comparable to other manufacturer part numbers - 554946
Black hard nylon capless bulb holder - tube type. Fits in many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with wired terminals to allow fitting of capless...
Push in plastic bulb holder for capless bulbs. Supplied with two wire crimp terminals for capless bulbs. Fits jewel lights, ST38 conversion and 1130 conversions. Dimensions main body 28mm long x...
Comparable to other manufacturer part numbers - SLBH, S6005
Hiqh quality clamp for tightening the bulb holder socket in the back of Lucas lamp refectors onto BA15 bulb holders (e.g. our part numbers 853 or 153). The clip strap is formed from steel and...
Black soft rubber capless bulb holder - tube type. Fits in many side light apertures and also clock and gauge backs. Supplied with wired terminals to allow fitting of capless T10 and T15 wedge...
Rubber mounted flanged MCC/BA9S pilot light bulb holder. Equivalent to Lucas part number 554710. 15cm long wire tails finished in bullet connectors. shrink wrap sheath. Rubber feed through grommet...
Comparable to other manufacturer part numbers - 554710
Black nylon capless bulb holder - tube type. Fits many side light apertures including Wipac type lights and also Smiths Gauges. Supplied with two crimp wire terminals to allow fitting of capless...
Comparable to other manufacturer part numbers - SVC-13-1567-BK
Bulb holder sleeve (offset pin BAY15D) and cotton braid pig tail wires which will fit into part number 211 series 'Duolamp' type lamps to enable a small (19mm diameter) globe double contact bulb...
L539 Clear lens side light and indicator lamp, with double contact bulb holder equivalent to Lucas L539 type. Diameter 83 mm. Applications include Alvis (TD21) Austin, Bentley, Bristol, Cobra, MG,...
Comparable to other manufacturer part numbers - 539CSIDE
Amber lensed lamp equivalent to Lucas L539 type with double contact bulb holder. Diameter 83mm. Applications include Austin, Bentley, Bristol, Cobra, MG, Riley, Rolls Royce, Rover and Vauxhall....
Clear lensed side lamp or indicator for 5W side or 21W amber bulb equivalent to the Lucas L539 type. Single contact bulb holder. Diameter 83mm. Applications include Alvis, Austin, Bentley,...
Comparable to other manufacturer part numbers - 539LCA
Kit of two WEDGE T10 base LED bulbs for Lucas type 1130 side lamps that have been converted to SIDE LIGHT & INDICATOR operation with the 424A T10 bulb holder kit (or purchased as 297IND,...
393.95236
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Wiring harness for H4 headlamps fitted with push fit WEDGE T10 side light bulb holder that accepts capless T10 base bulbs (e.g. B501). Supplied with plastic sheathing and rubber grommet for feed...
Comparable to other manufacturer part numbers - 357-H4-SH
Conversion kit to modify your 776 part number or Lucas ST38/'Pork Pie' type rear lamps to also give amber turn indication. New WEDGE T10 bulbs and bulb holders, special red and amber lens. This...
Comparable to other manufacturer part numbers - 0038CONV
Kit of three WEDGE T10 base bulbs for Lucas type ST38 'Pork Pie' lamps that have been converted to STOP,TAIL & INDICATOR with the ST38CONV kit (or purchased as CA1249 lamps, with the same 3 x...
326.0398
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
323.7162
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
323.7162
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles...
323.7162
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim. Clear glass lens with AMBER bulb. 25mm depth from mounting panel. Lucas model L488 with flat lens. Mounts through...
6 volt festoon bulb 11mm x 39mm 5 watt. Use indicator or interior. For LED upgrade bulbs please see part numbers B253LEDW-A and B253LEDW-E. For a much brighter LED...
12 volt festoon bulb 11mm x 39mm 5 watt. Use indicator or interior. For LED upgrade options please see part number B239LEDW-A and B239LEDW-E. For even brighter LED options with...
Recessed lamp approximately 72mm diameter with rubber boot and body. Chrome rim with clear glass lens 45mm deep. Supplied with AMBER bulb. Equivalent to Lucas lamp model L594 with raised lens. SCC...
Two T10 edge base bulbs (amber for flasher, clear for sidelamp) - 12 volt ONLY. Bulb holder for fitting into Lucas 1130 sidelamps (equivalent to our 297 part number series lamps). Supplied in...
Double contact bulb holder for Lucas 1130 type side lamp, accepts double contact SBC BA15D parallel pin bulbs. Please note these are made to original pattern. These bulb holders allow conversion...
Clear glass sidelamp with heavy chrome rim (approx 63mm overall). Glass lens, rubber back boot supplied. Single contact BA15S bulb holder. As fitted to early Morris Minor, Land Rover, Wolseley...
A neat rear lamp equivalent to the Rubbolite No. 25 lamp, with a single mounting point. Can also be supplied with a flat red lens (instead of the domed red lens fitted as standard) to give a lamp...
A neat rubber side bolt mounted indicator lamp, moulded to match the original Rubbolite 25 lamp, without any side lens (for number plate illumination). Supplied with a domed amber lens as standard...
British Pre-focus P36D headlamp connector with lead. Double contact with three pin bayonet bulb holder, three wires with headlamp bowl sealing grommet and soldered bullet connecters, overall...
Torpedo style side lamp, reproduction of the Lucas 1130 type. Chromium plated body approx 100mm long x 46mm diameter, amber plastic moulded lens.
Double filament bulb holder (allows combined side...
Green 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
103.82297
Complete Automobilist - Lamps - Lucas Type Warning Lights
Amber 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
103.82297
Complete Automobilist - Lamps - Lucas Type Warning Lights
Blue 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb...
103.82297
Complete Automobilist - Lamps - Lucas Type Warning Lights
Red 'Jewel' warning lamp equivalent to Lucas type WL13, as used on a number of high quality vehicles including Aston Martin. Machined aluminium surround complete with WEDGE T10 capless bulb holder...
103.82297
Complete Automobilist - Lamps - Lucas Type Warning Lights
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Round interior lamp with switch, chrome rim with domed opaque glass lens held with spring wire clip, dimensions 120mm diameter x 20mm tall, lamp base protrudes 20mm on the back of the lamp with...
Stop and tail lamp with double contact bulb holder equivalent to Lucas type L691/2. Alternative part number 54296. Rim diameter 83 mm. "E" Marked. Applications include Austin Healey, Hillman Imp,...
Comparable to other manufacturer part numbers - 691ST, 54296
Reproduction 'D' Lamp with full red glass lens, equivalent to the Lucas ST51 type. Fitted with double contact bulb holder (for stop and tail lamps). Body 87mm wide x 75mm tall x 54mm deep, backing...
Chrome rimmed panel warning light, blue main beam. Rim diameter 16mm approx, hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar rear...
Comparable to other manufacturer part numbers - WLMAIN
Chrome rimmed warning light, green side lights. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V, 2W bulb as standard. 6.3mm push on spade/Lucar rear...
Comparable to other manufacturer part numbers - WLSIDE
Chrome rimmed panel warning light, green front fog light. Rim diameter 16mm approx, Hole required 12.5mm approx. Fitted with BA7S bulb holder and 12V 2W bulb as standard. 6.3mm push on spade/Lucar...
Comparable to other manufacturer part numbers - WLDIP
Dashboard warning light with hexagonal fronted lens and CHROME bezel. Equivalent to Lucas part numbers 38189, 38190, WL15 and SPB389. Made from the original tooling. Fitted with BA7S bulb holder...
Comparable to other manufacturer part numbers - 38189, 38190, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and CHROME bezel. Equivalent to Lucas part numbers 38192, SPB391 and WL15. Made from the original tooling. Fitted with BA7S bulb holder and 12V...
Comparable to other manufacturer part numbers - 38192, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and CHROME bezel. Equivalent to Lucas part numbers 38191, WL15 and SPB390. Made from the original Lucas tooling. Fitted with BA7S bulb holder...
Comparable to other manufacturer part numbers - 38191, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and CHROME bezel. Equivalent to Lucas part numbers 54360571, SPB392 and WL15. Made from the original tooling. Fitted with BA7S bulb holder and...
Comparable to other manufacturer part numbers - 54360571, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and NICKEL bezel. Equivalent to Lucas part number 54360102, WL15 and SPB389. Made from the original tooling. Fitted with BA7S bulb holder and...
Comparable to other manufacturer part numbers - 54360102, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and NICKEL bezel. Equivalent to Lucas part number 54360193, SPB392 and WL15. Made from the original tooling. Fitted with BA7S bulb holder and...
Comparable to other manufacturer part numbers - 54360193, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and NICKEL bezel. Equivalent to Lucas part number 54360192, WL15 and SPB390. Made from the original tooling. Fitted with BA7S bulb holder and...
Comparable to other manufacturer part numbers - 54360192, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and NICKEL bezel. Equivalent to Lucas part number 54360571, SPB392 and WL15. Made from the original tooling. Fitted with BA7S bulb holder and...
Comparable to other manufacturer part numbers - 54360571, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and BLACK bezel. Equivalent to LAND ROVER part number 559322. Made from the original tooling - equivalent to Lucas part numbers WL15, SPB392....
Comparable to other manufacturer part numbers - 559322, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and BLACK bezel. Equivalent to LAND ROVER part number 589027 and Lucas numbers SPB390, WL15. Made from the original tooling. Fitted with BA7S...
Comparable to other manufacturer part numbers - 589027, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
Dashboard warning light with hexagonal fronted lens and BLACK bezel. Equivalent to LAND ROVER part number 575396. Made from the original tooling, equivalent to Lucas part number SPB392 and WL15....
Comparable to other manufacturer part numbers - 575396, WL15
100.550896
Complete Automobilist - Lamps - Lucas Type Warning Lights
L539 type clear lensed reverse light or front side lamp/indicator. Please specify single contact (BA15S) bulb for reversing or twin (BAY15D) contact bulb holder for USA front side light and...
Comparable to other manufacturer part numbers - 539LC
Genuine SMITHS designed voltage gauge, skillfully crafted to the original drawings and specifications, using the original tools and dies. This one is 52 mm in diameter with a 1/2 V chrome bezel,...
Genuine SMITHS designed instrument, skillfully crafted to the original drawings and specifications, using the original tools and dies. This one is 52mm diameter with 1/2 V chrome bezel, white...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Small panel mounted warning lamp with chrome rim 16mm diameter. 12 volt, 2 watt, BA7S base bulb fitted. Push fit into a 13mm panel hole. Two 6.3mm push on Lucar/spade type rear terminal...
Torpedo style sidelamp, reproduction of the original Lucas 1130 type lamp,Chromium plated body approx 100mm long x 46mm diameter. Clear plastic moulded lens correct for many applications including...
Comparable to other manufacturer part numbers - 52030B
Replacement glass lamp unit for Lucas 576 type spot lamps. Supplied with bulb holder but without bulb. Plain domed lens with chrome centre dot. Please order bulb separately - with the British...
Replacement glass lamp unit for Lucas CLR700 type lamps. Plain domed lens with chrome centre dot. Ford part reference E26-NB-2. Supplied with bulb holder but without bulb. Please order bulb...
Comparable to other manufacturer part numbers - E26-NB-2
Replacement glass lamp unit for Lucas SFT700 type lamps. Block pattern domed lens with embossed centre. Ford part reference E0A-15262. Supplied with bulb holder but without bulb. Please order bulb...
Comparable to other manufacturer part numbers - E0A-15262
Recessed lamp with rubber boot and body. Approximately 74mm diameter. Chrome rim with amber glass lens (25mm depth from mounting panel). Lucas model L488 with flat lens. Mounts through 35mm panel...
Recessed lamp, approximately 72mm in diameter with rubber boot and body. Chrome rim with amber glass lens 45mm deep. Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm....
Comparable to other manufacturer part numbers - LU56583, 2A9013
New complete lamp units as fitted to the ford 103E and 104E, comprising of new lens, new base with double contact bulb holder for rear and brake light (12v or 6v bulbs sold separately), new...
Recessed lamp (approx 72mm diam) - rubber boot/body, chrome rim, clear glass lens (45mm deep). Equivalent to Lucas model L594 with raised lens. Panel hole for fixing 35mm. Supplied with a BAY15D...
Comparable to other manufacturer part numbers - LU52338, 1B9100
Recessed lamp - rubber boot/body (approx 74mm diam) chrome rim, clear glass lens (25mm depth from mount panel), Lucas model L488 with flat lens, mounts through 35mm panel hole. Supplied with a...
Reproduction of the L548 type lamp surround and lenses. Includes high quality chrome plated cast frame with red and amber lenses. Commonly fitted to Aston Martin DB4, Alvis TD21, Humber Hawk, and...
Replacement glass lamp unit for Lucas CFT700S type lamps. Block pattern domed lens with central chrome knob. Suitable alternative to Lucas part no 554813. Supplied with bulb holder but without...
Chrome 6 1/2" headlamp unit, complete with switch panel and ammeter, equivalent to the Lucas MU42 model. The MU42 lamp is similar to the earlier DU42, but with a different rim fixing. It was...
6 1/2" headlamp unit with black body and chrome rim, complete with OFF/L/H switch panel, ammeter and wire feed cover, equivalent to the Lucas MU42 model. The MU42 lamp is similar to the earlier...
6 1/2" headlamp unit with black body and chrome rim, complete with lighting and charging switch (U39) panel and ammeter, equivalent to the Lucas DU42 model. 6" glass aperture. The DU42 lamp is...
Comparable to other manufacturer part numbers - 50128
Remanufactured side lamp to the L513 pattern as used on Jaguar XK150 and Daimler among others (original Lucas part number 52175). Clear patterned lens with chrome rim (45mm diameter x approx 12mm...
Comparable to other manufacturer part numbers - 52175
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Comparable to other manufacturer part numbers - CA1265, CA1266, 211R
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Single red lens 'Duolamp'. Gloss black powder coated housing with polished stainless steel rim, 97mm diameter. Body 60mm deep. One double contact BAY15D bulb holder. With or without number plate...
Genuine SMITHS designed oil pressure gauge instrument, skillfully crafted to the original drawings and specifications, using the original tools and dies. This one is 52 mm in diameter with 1/2 V...
Vintage 'Toby' side lamp equivalent to Lucas part number 1142. Originally fitted to many quality cars including Rolls-Royce and Bentley. All brass construction with chrome finish to lamp body, rim...
6V Positive Earth. 12 Amber LED, 7 Red LED stop/tail light with 4 white LED number plate light. To upgrade lamp part number 211RA-S. One single contact equal pin BA15S (1156/SCC) bulb base...
77.77855
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Streamline 'Torpedo' style side/wing lamp. A quality reproduction of the Lucas 1130 type side lamp, originally available with ebony black body and plated rim. Gloss black powder coated brass body...
12V Negative Earth. 12 Amber LED, 7 Red LED stop/tail light with 4 white LED number plate light. For upgrade of lamp part number 211RA-S. One single contact equal pin BA15S (1156/SCC) bulb base...
77.09107
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Streamline 'Torpedo' style side/wing lamp. A quality reproduction of the Lucas 1130 type side lamp, originally available with ebony black body and plated rim. Gloss black powder coated brass body...
Reproduction of Lucas LD109 type side lamp, approx 51mm diameter x 63mm long, with teardrop base and red dot medallion in top, frosted lens. Can only be used as sidelight. MCC/BA9S bulb holder -...
The assembly consists of a plastic UK spec nest fitted with a "Tripod" P700 7" lens, with a side (parking) light. Offered in PAIRS only (2 assemblies). Supplied with 12V 60/55W halogen H4 bulb and...
Comparable to other manufacturer part numbers - P700B
Torpedo style side lamp, reproduction of the Lucas 1130 type light, chromium plated brass body approx 100mm long x 46mm diameter, frosted lens with chrome rim held with screw in top, double...
Comparable to other manufacturer part numbers - 1130GP
Remanufactured side lamp to the L490 pattern as used on Jaguar Mk2, early XK and Armstrong Siddeley among others (original Lucas part number 52474). Clear patterned lens with chrome rim (30mm...
Comparable to other manufacturer part numbers - 52474
Round ruber lamp equivalent to the Rubbolite number 23 rear lamp - 91mm diameter at widest, with raised red lens and side number plate illumination lens. Fitted with two double contact bulb...
The assembly consists of a plastic Euro/USA spec nest fitted with a "Tripod" P700 7" lens, with a side (parking) light. Offered in PAIRS only (2 assemblies). Supplied with 12V 60/55W halogen H4...
Round rear stop and tail lamp with single flat "reflective" red glass lens. Polished stainless steel body 97mm diameter x 61mm deep (74mm including bulb holders), rear mounting bolts with 45mm...
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. 12V only with incandescent...
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. 12V only with incandescent...
Rear 'D' lamp, equivalent to the original Lucas ST51 type lamp, though converted for combined stop, tail, number plate illumination and indicator/turn signal function. 12V only with incandescent...
Hiqh quality 7" light unit. This reproduction PL700 unit with tripod design featuring the LUCAS PL 'Shield' badge takes the popular H4 halogen bulb. It is a high quality reproduction of the...
Genuine SMITHS designed oil tempurature gauge, skillfully crafted to the original drawings and specifications, using the original tools and dies. This one is 52 mm in diameter with 1/2 V chrome...
A PAIR of LED light boards for conversion of Lucas ST38 'Pork Pie' type lamps fitted with all RED lenses to bright LED operation. On board electronics make this product suitable for 6V & 12V...
67.29511
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Vintage 'Toby' side lamp equivalent to Lucas part number 1142. Originally fitted to many quality cars including Rolls-Royce and Bentley. All brass construction with chrome finish to lamp body, rim...
6 1/2" headlamp unit in military green with blackout hood over lens cover with ut out/holes for head and side light. Complete with lighting and charging switch panel (U39) and ammeter, equivalent...
Round rear stop and tail lamp with single flat "reflective" red glass lens. With number plate Illumination with glass lens on bottom side of tail light housing. Highly polished stainless steel...
Replacement part equivalent to Lucas type P700 (7") 'Tripod' bar headlamp reflector unit. Supplied with 12V 60/55W halogen H4 bulb and T10 WEDGE base side light bulb holder fitted with 5W bulb....
H4 Flat lens, halogen headlamp upgrade set complete with side/pilot lights, wide application including rubber bumper MG owners upgrading from sealed beam headlamps. Offered for right hand drive...
Reproduction of the Lucas LD109 type side lamp, approx 51mm diameter x 63mm long, with round base and red dot medallion in top, frosted lens. Chrome finish. Can only be used as sidelight. MCC/BA9S...
Reproduction of Lucas LD109 type side lamp, approx 51mm diameter x 63mm long, with round base and red dot medallion in top, frosted lens. Gloss black powder coated finish. Can only be used as...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
Early pattern cylindrical rear lamp equivalent to Lucas type 582. With side number plate illumination in stop and tail lamp configuration, when fitted with a red glass prismatic lens. Without side...
A useful rear lamp and good reproduction of the Lucas MT110 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
Comparable to other manufacturer part numbers - 53009
Toby chrome ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR Number Plate...
Toby black ST38/'Pork Pie' type lamp with standard (three BA15S) bulb holder arrangement, fitted with a LED light board and split Red/Amber lens for Stop, Tail, INDICATOR & Number Plate...
Replacement part equivalent to Lucas type P700 (7") 'Tripod' bar headlamp reflector unit. Supplied with 12V 60/55W halogen H4 bulb and T10 WEDGE base side light bulb holder fitted with 5W bulb....
A useful rear lamp and good reproduction of the Lucas MT211 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The prismatic red lens...
Comparable to other manufacturer part numbers - 53056, 259
A useful rear lamp and good reproduction of the Lucas 477/1 model used on motorcycles, though offering other useful applications as additional number plate illumination etc. The large red lens...
Comparable to other manufacturer part numbers - 53182B
Early pattern 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide x 84mm tall....
Comparable to other manufacturer part numbers - 0042C
Early pattern reproduction 'D' lamp with split red glass lens, equivalent to the Lucas ST51 type. Fitted with two bulb holders. Body 87mm wide x 75mm tall x 54mm deep, backing base plate 95mm wide...
Comparable to other manufacturer part numbers - 0042B
7" headlamp unit with black body and chrome rim, complete with pre-focus light unit fitted with headlamp and sidelight bulb holders, equivalent to the Lucas SSU700. Plain black body with single...
8" headlamp unit with chrome body and rim, complete with pre-focus light unit fitted with headlamp and sidelight bulb holders, equivalent to the Lucas DU142. All chrome body with single wiring...
A PAIR of all in one LED light boards and split Red/Amber lenses for conversion of Lucas ST38 'Pork Pie' type Stop & Tail lamps (with or without number plate illumination) with all RED lenses...
56.440063
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
5 3/4" Round domed headlamp lens for EURO/USA Left Hand Drive specification, with sidelight. Fitted with a BA9S sidelight bulb holder - with two 6.3mm spade connections.
These lenses feature the...
Comparable to other manufacturer part numbers - LA1016EP
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. With number plate illuminator...
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red split glass lens. 12V bulbs included as standard. Vintage style cloth braided green...
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. Vintage style cloth...
Streamline Torpedo style side/wing lamp. Reproduction of the Lucas 1130 type side lamp. Chromium plated brass body approximately 100mm long x 46mm diameter. Frosted glass lens with chrome rim...
5 3/4" Round domed headlight lens, with sidelight. Fitted with a BA9S sidelight bulb holder, with two 6.3mm spade connections. Equivalent to Lucas part number LUB225. Please see part numbers...
Comparable to other manufacturer part numbers - SVC-LA1016P, LUB225
Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens....
Comparable to other manufacturer part numbers - 523648
Vintage 'Toby' rear lamp equivalent to Lucas part number ST52 (alternative Lucas part number 523648). These high quality reproduction lamps are made from steel body with a red glass lens....
Comparable to other manufacturer part numbers - 523648
Streamline Torpedo-style side/wing lamp. Reproduction of the Lucas 1130 type side lamp. Chromium-plated brass body approximately 100mm long x 46mm diameter. Frosted glass lens with chrome rim...
7" headlamp unit with chrome body and rim, complete with pre-focus light unit fitted with headlamp and sidelight bulb holders, equivalent to the Lucas SS700P - 5 hole model lamp popular in...
PAIR of all in one LED light boards to upgrade CA1249 lamps - Lucas type ST38 'Pork Pie' Stop & Tail lamps converted to include indicator functionality with split WEDGE T10 bulb holders and...
50.795498
Complete Automobilist - Bulb Holders, Traditional Bulbs & LEDs - LED Panels & Kits (211/Duolamp, 1130, ST38/'Pork Pie' and ST51/'D' Lamp)
Small, flexible/shockproof rubber bodied rear lamp equivalent to the old Rubbolite No.5 model for vintage motorcycles or as an auxiliary rear lamp for small cars. The rubber body is fitted with a...
PL700 light unit. LHD 7" reflector. Reproduction PL700 unit with tripod design featuring a 'Lucas PL' 'Shield' badge - takes the popular H4 halogen bulb. This is a high quality reproduction of the...
A PAIR of PL700 type light units. LHD 7" reflector unit with side lights. Reproduction PL700 type unit with tripod design featuring a 'Halogen PL' 'Shield' badge - takes the popular H4 halogen...
A PAIR of PL700 design light units. RHD 7" reflector units WITH side lights. A quality reproduction of the PL700 type unit with tripod design featuring a 'Halogen PL' 'Shield' badge - takes...
PL700 light unit. RHD 7" reflector. This reproduction PL700 unit with the 'LUCAS PL' 'Shield' badge takes the popular H4 halogen bulb. It is a high quality reproduction of the original PL700 unit...
7" Headlamp unit for British Pre-focus type bulbs, equivalent to the Lucas 700 type. With pilot hole for side lamp - push fit T10 WEDGE base bulb holder - please see part numbers B117B and B501...
Torpedo style sidelamp. High Pressure Die-cast alloy body (made to satisfy the IVA test) Chrome finish. Equivalent to that originally made by Lucas. Clear plastic lens. Available with 5w side...
Comparable to other manufacturer part numbers - 1130CC
Gloss black powder coated round lamp housing with highly polished stainless steel rim. Excellent quality all red and amber split glass lens. 12V bulbs included as standard. With number plate...
Pair of 5 3/4" free standing headlights without sidelights, with a highly polished stainless steel housing and rim. Fitted with 5 3/4" round domed headlamp lens, without sidelight.
These lenses...
Comparable to other manufacturer part numbers - 1267S
Internally modified torpedo style sidelamp, reproduction of the Lucas 1130 type. Chromium plated on brass body approx 100mm long x 46mm diameter. Clear plastic lens held with screw in top, the...
A pair of 5 3/4" free standing headlights WITH side lights. Satin black powder coated steel body, ideal for painting body colour if needed. Fitted with 5 3/4" round domed headlamp lens with...
