Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a BA15d bulb, for spare bulbs please see our B206 (6v) of B209 (12v). --

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a BA15d bulb, for spare bulbs please see our B206 (6v) of B209 (12v). --

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a BA15d bulb, for spare bulbs please see our B206 (6v) of B209 (12v). --

Pull out dash lamp, all brass construction, screw on end cap, 57mm long with 51mm diameter mounting flange. Fits into a 32mm hole. Requires separate switch. Black, Chrome or Nickel finish. Uses a BA15d bulb, for spare bulbs please see our B206 (6v) of B209 (12v).

Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this wonderful dash lamp. All brass lamp body construction with sprung steel base and chrome plated finish. Also available in black finish - please see part number DF5B. Quarter turn lever action switch, sprung double contact (BA15D) brass bulb holder. Polished aluminium reflector. Brass locating stud in end of body snap locates into sprung steel base. Rolled hinge at other end of base. 5mm diameter mounting holes in base at 43mm centres. 32mm diameter body, 110mm overall length, 28mm base width. Complete with 17cm long wire tails finished with shrink wrap on to 4.3/4.8mm diameter, 10mm long brass bullet connectors. Fitted with a chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Supplied complete with 6 or 12V 5W bulb. For spare bulbs please see part numbers part numbers B206 (6V) or B209 (12V).

Chrome cowl shields the glass lens, equivalent to the Lucas type L534 lamp. Base approx 60mm x 40mm. A good value low cost reproduction with some pressing marks under the chrome.

As Lucas type DF41 lamp, chromium cowl with 'Toby' medallion on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, centre hole size required 18mm, supplied with cable and bulb. Basic switch incorporated with twist cap. 50 mm front to face. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) or B207 (12v). The cowl is fitted with a 'Toby' medallion, as applied to our finest early lamp and mirror recreations. 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range.

New old stock original Lucas panel lamp, part number 54057245. Marked 'Butlers England'. Butlers part number BU/1572/S. Takes a BA9S base bulb. Complete with mounting stud nuts and washers, wired connection finishing in a 6.3mm female LUCAR connection. Applications include Massey Ferguson MF135, 165, 185 tractor dash/panel lamp. A really nice original part.

Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. Basic switch incorporated with twist cap. --

Small plastic interior roof lamp fitted to classic Mini (1974 to 1985 ) and MGB GT as well as other vehicles. Size 4.25" x 1.75". Fitted with 12V festoon bulb

Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. Basic switch incorporated with twist cap. --

Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light position. Supplied with clip base. 90mm long. This lamp has no switch incorporated. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) of B207 (12v). --

Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light position. Supplied with clip base. 90mm long. This lamp has no switch incorporated. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) of B207 (12v). --

Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light position. Supplied with clip base. 90mm long. This lamp has no switch incorporated. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) of B207 (12v). --

Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light position. Supplied with clip base. 90mm long. This lamp has no switch incorporated. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) of B207 (12v). --

Cylindrical dash lamp, all brass construction - available polished brass, chrome with powder coated black end caps, chrome or nickel plate. Centre tube 25mm diameter can be rotated to adjust light position. Supplied with clip base. 90mm long. This lamp has no switch incorporated. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) of B207 (12v).

Bracket mount type dash or panel lamp. Mounting plate 23mm x 65mm (can be cut smaller) with lamp fitted. Stainless steel cover (pulls off to change bulb) and basic switch. Applications include Ford model A 1930/31. Uses a BA15S bulb, for spare bulbs please see our B205 (6v) of B207 (12v).

Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 10mm. Overall 57mm tall x 25mm wide when fitted. Top cover pulls off to change bulb. Basic switch on stem side. Dull plated chrome finish only. The mount bolt at rear will fit though 23mm panel thickness. This is a basic lamp and the finish is not polished, but it offers a good alternative where dash space is limited. Uses a BA15S bulb, for spare bulbs please see our B205 (6v) of B207 (12v)

Nice dashboard lamp with helmet cover. Fits through metal dash hole approx 17mm. Overall 46mm tall x 26mm wide when fitted. Top cover pulls off to change bulb. No switch in this unit. Black finish only. Uses a BA15S bulb, for spare bulbs please see our B205 (6v) of B207 (12v)

Dash lamp chrome on brass cowl/cap with Lucas 'King of the Road' emblem stamped on top, fitted to our 289L type DF41 lamp, dimensions 44mm tall x 27mm outer diameter.

As Lucas type DF41 lamp, chromium cowl with 'King of the Road' emblem stamped on top, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. Basic switch incorporated with twist cap. 50 mm front to face. Uses a BA15s bulb, for spare bulbs please see our B205 (6v) or B207 (12v)

Small metal covered lamp with opaque plastic lens for various applications. Base 70mm x 33mm, two screw fixings 51mm apart. Lamp body protrudes approx 25mm. Please note that this lamp is fitted with a Wedge T10 base capless bulb - available in 6 or 12 volt. For spare bulbs, please see our B501-6V or B501-12V or LED equivalents.

Type DF41 lamp, speed warning lamp as used in some MG's, chromium knurled cowl with coloured lens mounted in a chrome ring on the top, lenses available in green or amber, black flange (70mm x 37mm) fitting, 2 1/8" (54mm) mounting hole centres, supplied with cable and bulb. Basic switch incorporated with twist cap.

Vintage dash lamp equivalent to Lucas part number DF5. Originally fitted to many quality pre-war cars including those from Rolls-Royce, Bentley, Alvis and Lagonda. Superb recreation of this wonderful dash lamp. All brass lamp body construction with sprung steel base and gloss black enamel finish. Also available in chrome finish - please see part number DF5C. Quarter turn lever action switch, sprung double contact (BA15D) brass bulb holder. Polished aluminium reflector. Brass locating stud in end of body snap locates into sprung steel base. Rolled hinge at other end of base. 5mm diameter mounting holes in base at 43mm centres. 32mm diameter body, 110mm overall length, 28mm base width. Complete with 17cm long wire tails finished with shrink wrap on to 4.3/4.8mm diameter, 10mm long brass bullet connectors. Fitted with a chrome on brass 'Toby' medallion, as applied to our finest early lamp and mirror recreations 'Toby Mitchell - London NW1' is the mark Vintage Supplies has applied to its authentic reproductions of selected early CAV and Lucas pattern lamps and mirrors for over 30 years, continuing the manufacture and development of John Mitchell high quality 'Toby' branded product range. Supplied complete with 6 or 12V 5W bulb. For spare bulbs please see part numbers part numbers B206 (6V) or B209 (12V)