View Basket0 item(s) in the basket.
Orderline: +44 (0)1684 219864
£GBP
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe only. Please note that you will need to open the inside bore out by drilling to obtain higher rates of fluid flow. --
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe only. Please note that you will need to open the inside bore out by drilling to obtain higher rates of fluid flow. --
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. --
3/8'' (10mm) bore. Transparent reinforced flexible tubing. Use tail piece and `O' clips to secure.
Flanged, cast brass 90 degree elbow - 1/4" BSP female thread at one end, 3/8" BSP male thread with a flanged base at the other. Overall length 55mm, 20mm diameter with a 25mm diameter flange. Ideal for use with our 973S tap with a 3/8" BSP threaded fuel tank feed/connection.
Fuel pipe union nut, fits carburettor inlet, fuel pump and tank sender unit, 1/2" UNF thread accepts 1/4" o/d pipe.
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. -- Wade, tubular copper - offered EACH
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. --
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. --
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. --
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. --
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe. --
Compression olives for solderless fittings. Offered in imperial pipe sizes and in packets of 10 pieces for 1/8" to 3/8" OD pipe. Sold as EACH for 1/2" OD pipe.
5/16'' (8mm) bore. Transparent reinforced flexible tubing. Use tail piece and `O' clips to secure.
1/4'' (6mm) bore. Transparent reinforced flexible tubing. Use tail piece and `O' clips to secure.
For 5/16'' (8mm) tube
Brass union with filter gauze. 1/4"BSP thread with filter gauze, fitted with 7/16" x 19TPI nut and nipple for 1/4'' O/D pipe.
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters.
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass pipe fitting nut for solderless compression fitting. Female BSP threaded nuts with through holes for a range of copper pipe outer diameters. --
Brass double ended 3/8" union with two nuts and nipples for solder fitting of 3/8" OD copper pipe
Brass double ended 1/2" BSP union with two nuts and nipples for solder fitting of 1/2" OD copper pipe
Brass double ended 1/4" BSP union with two nuts and nipples for solder fitting of 5/16" OD copper pipe
Brass double ended 1/4" BSP union with two nuts and nipples for solder fitting of 1/4" OD copper pipe
Brass double ended 1/8" BSP union with two nuts and nipples for solder fitting of 3/16" OD copper pipe
Brass double ended 1/8" BSP union with two nuts and nipples for solder fitting of 1/8" OD copper pipe
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. -- 1/2" BSP threads
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. -- 3/8" BSP threads
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. -- 1/4" BSP threads
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. -- 1/8" BSP threads
Brass hexagon body with the same male BSP threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP.
Brass tee with three nuts and nipples for solder fitting of 1/2" OD copper pipe
Brass tee with three nuts and nipples for solder fitting of 3/8" OD copper pipe
Brass tee with three nuts and nipples for solder fitting of 5/16" OD copper pipe
Brass tee with three nuts and nipples for solder fitting of 1/4" OD copper pipe
Brass tee with three nuts and nipples for solder fitting of 1/8" OD copper pipe
Brass tee with three nuts and nipples for solder fitting of 1/8" OD copper pipe
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP female threads. These tees are equal - so all three ends on each size of tee feature the same thread -- 1/2" BSP threads all ends
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP female threads. These tees are equal - so all three ends on each size of tee feature the same thread -- 3/8" BSP threads all ends
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP female threads. These tees are equal - so all three ends on each size of tee feature the same thread -- 1/4" BSP threads to all ends
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP female threads. These tees are equal - so all three ends on each size of tee feature the same thread -- 1/8" BSP threads all ends
Brass equal tee pieces for use with solder type nuts and nipples. 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. Offered in sizes 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP female threads. These tees are equal - so all three ends on each size of tee feature the same thread
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at both ends.
Brass elbow with 1/2" BSP male threads and two nuts and nipples for solder fitting to 1/2" OD copper pipe
Brass elbow with 3/8" BSP male threads and two nuts and nipples for solder fitting to 3/8" OD copper pipe
Brass elbow with 1/4" BSP male threads and two nuts and nipples for solder fitting to 5/16" OD copper pipe
Brass elbow with 1/4" BSP male threads and two nuts and nipples for solder fitting to 1/4" OD copper pipe
Brass elbow with 1/8" BSP male threads and two nuts and nipples for solder fitting to 3/16" OD copper pipe.
Brass elbow with 1/8" BSP threads with two nuts and nipples for solder fitting to 1/8" OD copper pipe
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at both ends. -- 1/2" BSP threads
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at both ends. -- 3/8" BSP threads
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at both ends. -- 1/4" BSP theads
Brass MALE/MALE elbow with 60 degree cone seat for solder type pipe fittings. Supplied in four sizes - 1/8" BSP, 1/4" BSP, 3/8" BSP and 1/2" BSP. Parallel male threaded ends which are the same at both ends. -- 1/8" BSP threads
Norgren/enots male solderless union nut, thread size 7/16" x 24tpi for 1/4'' (6mm) tube,
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. -- Steel union with 1/8BSP tapered thread x 1/4BSP parallel thread
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. --
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately.
Hexagon body with different male threads each end, 60 degree tapered ends for solder type fittings which are not supplied - if required please order separately. --
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit.
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit. -- 1/8" pipe
1/8" BSP threaded nut and solder nipple for either 1/8" or 3/16" OD pipe for the rear of oil pressure gauges. The nipple has flat sealing face and is supplied with fibre washer to suit. -- 3/16" pipe
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe --
Solder type nut and nipple pipe ends supplied in SETS of one nut and one nipple. Offered in various sizes: 1/8" BSP for 1/8" or 3/16" OD pipe 7/16" x 19tpi for 3/16" OD pipe 1/4" BSP for 1/4" or 5/16" OD pipe 3/8" BSP for 3/8" OD pipe 1/2" BSP for 1/2" OD pipe
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut --
Standard solder type pipe nipples only - for fitting to the end of copper pipe etc. Offered in the following sizes, for: 1/8" outside pipe fitting 1/8" BSP threaded nut 3/16" outside pipe fitting 1/8" BSP threaded nut 1/4" outside pipe fitting 1/4" BSP threaded nut 5/16" outside pipe fitting 1/4" BSP threaded nut 3/8" outside pipe fitting 3/8" BSP threaded nut 5/16" outside pipe fitting 3/8" BSP threaded nut 1/2" outside pipe fitting 1/2" BSP threaded nut
Standard brass solder type pipe nut only with female thread. Offered in the following sizes: 1/8"BSP threaded nut for 1/8" or 3/16" OD pipe solder nipple 1/4"BSP threaded nut for 1/4" or 5/16" OD pipe solder nipple 3/8"BSP threaded nut for 3/8" or special 5/16" OD pipe solder nipple 1/2"BSP threaded nut for 1/2" OD pipe solder nipple -- 1/2" BSP thread nut for solder nipple
Standard brass solder type pipe nut only with female thread. Offered in the following sizes: 1/8"BSP threaded nut for 1/8" or 3/16" OD pipe solder nipple 1/4"BSP threaded nut for 1/4" or 5/16" OD pipe solder nipple 3/8"BSP threaded nut for 3/8" or special 5/16" OD pipe solder nipple 1/2"BSP threaded nut for 1/2" OD pipe solder nipple -- 3/8" BSP thread nut for solder nipple
Standard brass solder type pipe nut only with female thread. Offered in the following sizes: 1/8"BSP threaded nut for 1/8" or 3/16" OD pipe solder nipple 1/4"BSP threaded nut for 1/4" or 5/16" OD pipe solder nipple 3/8"BSP threaded nut for 3/8" or special 5/16" OD pipe solder nipple 1/2"BSP threaded nut for 1/2" OD pipe solder nipple -- 1/4" BSP thread nut for solder nipple
Standard brass solder type pipe nut only with female thread. Offered in the following sizes: 1/8"BSP threaded nut for 1/8" or 3/16" OD pipe solder nipple 1/4"BSP threaded nut for 1/4" or 5/16" OD pipe solder nipple 3/8"BSP threaded nut for 3/8" or special 5/16" OD pipe solder nipple 1/2"BSP threaded nut for 1/2" OD pipe solder nipple -- 1/8" BSP thread nut for solder nipple
Standard brass solder type pipe nut only with female thread. Offered in the following sizes: 1/8"BSP threaded nut for 1/8" or 3/16" OD pipe solder nipple 1/4"BSP threaded nut for 1/4" or 5/16" OD pipe solder nipple 3/8"BSP threaded nut for 3/8" or special 5/16" OD pipe solder nipple 1/2"BSP threaded nut for 1/2" OD pipe solder nipple
Norgren/enots male solderless union nut, male thread size 3/8" x 24tpi for 1/8'' (3mm) OD tube.
Norgren/enots male solderless union nut, male thread size 3/8" x 24tpi for 3/16'' (5mm) OD tube.
Norgren/enots male solderless union nut, male thread size 9/16" x 24tpi for 3/8'' (10mm) OD tube.
Norgren/enots male solderless union nut, male thread size 1/2" x 24tpi for 5/16'' (8mm) OD tube.
Brass BSP threaded nut and push on hose connector fitting -- 3/8"BSP nut for 3/8" push on pipe
Brass BSP threaded nut and push on hose connector fitting -- 1/4"BSP nut for 5/16" pipe
Brass BSP threaded nut and push on hose connector fitting -- 1/4"BSP nut for 1/4" push on pipe
Brass Tee fitting body only. Although these fittings are threaded internally, this can easily be used for making a totally soldered tee joint on copper pipe. Offered for 5/16" and 3/8" OD pipe only. Please note that you will need to open the inside bore out by drilling to obtain higher rates of fluid flow.
Brass 5/16" compression Tee, supplied with three nuts and compression olives.
Brass 3/8" compression Tee, supplied with three nuts and compression olives.
Brass 3/16" compression Tee, supplied with three nuts and compression olives.
Brass 1/4" compression Tee, supplied with three nuts and compression olives.
