Very nice period style well-made, heavy-duty yellowy/beige canvas tool roll. Stitched leather tool holder strap with 9 adjustable tool holder leather loops, two internal canvas flaps with cloth stitched edging, and buckled leather securing strap. Dimensions when open 41cm x 26.5cm.

Hand-held digital multimeter with large LCD display for basic functions. Powered by 9 volt battery. CE approved.DC volts .... 0 - 500VAC volts .... 200V/500VDC amps  .... 2mA - 10AResistance Ω .... 200Ω - 20MΩTemperature °C .... .-40 to 1000Diode test. .... YesContinuity buzzer .... YesLow battery sign .... .YesDisplay .... 31/2 digit <1999Ranging .... ManualLCD size mm .... 15 x 48Dimensions mm .... 133 x 77 x 36

Superb locally made by a Master Saddler from Malvern, waxed leather tool bag, 3mm thick brown leather with reinforced lid and base, double thickness carrying handle with two all round 25mm fastening straps with brass buckles, overall dimensions 37cm long x 17cm wide x 17cm tall, internal dimensions 35cm long x 15cm wide x 14.5cm deep

Superb quality, locally made by a Master Saddler from Malvern, waxed leather roll, eight small stitched canvas pockets stitched onto two deep canvas pockets and internal canvas flap. All edges have a canvas stitched edging, 25mm securing strap with a nickel finish buckle. Dimension when open 41cm x 31cm.

Leather welding apron

Dash3 & Dash4 braid spreader. In order to insert the “olive” into TFE hose, the stainless protective braid must be separated from the Teflon liner. This can be achieved with a small screwdriver but is easier with a specialist tool. The braid spreader solves the problem and reduces the likelihood of the stainless braid ends injuring your fingers. In use the tool is simply inserted into the cut end of the hose and pushed—spreading the braid. The olive is then placed on the tool mandrel, pushed over the hose liner and under the braid until the liner bottoms against the shoulder of the olive. The tool mandrel is double-ended—one for -3 hose and one for -4. The handle contains a recess for the storage of spare olives.

Dash 3 braid-spreader. In order to insert the “olive” into TFE hose, the stainless protective braid must be separated from the teflon liner. This can be achieved with a small screwdriver but is easier with a specialist tool. The braid spreader solves the problem and reduces the likelihood of the stainless braid ends injuring your fingers. In use the tool is simply inserted into the cut end of the hose and pushed—spreading the braid. The olive is then placed on the tool mandrel, pushed over the hose liner and under the braid until the liner bottoms against the shoulder of the olive. FOR -3 HOSE ONLY

Small Valve Grinding Stick. Suction cups are 19mm and 22mm

6 piece AF spanner set in clip holder. Satin chrome finish spanners which are open end at one end, ring spanner at other. Drop forged hardened and tempered. Chrome vanadium steel. A good value workshop set. Sizes 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" across flats

9 piece AF hexagonal socket set for most general workshop applications. Drive size 3/8". A good value workshop set. Sizes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" across flats.

8 piece BSW Whitworth spanner set in holder pouch. Chrome finish spanners which are open end at one end, ring spanner at other. Drop forged hardened and tempered. Chrome vanadium steel. sizes 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" Note these spanners are also those you use on BSF size nuts a good value workshop set

14 piece AF spanner set in holder pouch. Satin chrome finish spanners which are open end at one end, ring spanner at other. Drop forged hardened and tempered. Chrome vanadium steel. sizes 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 1" and 1.1/4" across flat a good value workshop set

Heat-treated carbon steel, knurled bodied for controlled grip. Creates clean, accurate holes in rubber, leather, plastic and vinyl. Sizes 3, 4, 5, 6, 7 and 8mm

Highly durable steel pliers with 45° offset for ease of access. For removing spark plug boots quickly and safely. Insulated blades feature PVC tips for secure grip, preventing damage to terminals. Insulated soft-grip handles reduce user fatigue and prevent shock. Ideal for handling hot ignition leads.

Injection-moulded polypropylene handle with high quality rotating blade. Bayonet fitting for easy blade replacement. For removing burr from copper, aluminium and light duty steel pipes. Spare blade storage in handle. Compatible with Silverline Deburring Tool Blades. Length 150mm.

Self-contained twin steel brushes. Top brush cleans battery lead terminals, bottom brush cleans battery posts.

Connects between spark plug and ignition lead to give a clear indication of ignition system function.

Clear safety glasses in wraparound design for maximum visibility and eye protection. Impact and scratch resistant polycarbonate lenses with lightweight frame. Ideal for use in the workshop or general DIY. Conforms to EN166.

Strong aluminium body and heavy duty hinge. Bends 6, 8 and 10mm copper and aluminium tubing, up to 180°. Suitable for heating and hydraulic pipes. Compact size. Length 270mm

Strong, die-cast aluminium body and heavy duty steel hinge. Bends 8, 10 and 12mm copper and aluminium tubing. Durable steel handles with ergonomic soft grips. Guide with 0, 30, 60, 90, 120, 150 and 180° markings. Spring-loaded, tiltable hold-down mechanism.

Forged chrome vanadium steel sockets with double-pin type universal joint. For diesel glow plugs and petrol spark plugs. Rubber socket insert grips ceramic insulation to assist in plug extraction. Socket sizes: 8, 9, 10, 12, 14 and 16mm. Supplied in tough storage case

A traditional 100% canvas tool roll, in Castrol green with an embroidered logo. With 15 pockets, this tool roll is a stylish and practical addition for storing basic tools in your classic vehicle.

Solid rubber head and hardwood shaft. Head secured with glue and pin. For soft striking of woodworking chisels, forming sheet metal, and easing components.

Heavy duty steel wire brush with wooden handle. Bristle length 25mm. Length 290mm. 6 row

Heavy duty steel wire brush with wooden handle. Bristle length 25mm. Length 290mm. 4 row.

Steel wire bristle brushes for general cleaning. Polyurethane handle.

Brass-plated steel wire bristle brushes for light cleaning. Polyurethane handle

Powerful welding magnet for holding workpieces securely in place at fixed angles of 45, 90 & 135°. Enables unrestricted use of hands for precise, accurate work. Ideal for welding, soldering, pipe installation and assembly marking off.

Powerful welding magnet for holding steel parts in place at 30°, 45°, 60°, 75° and 90°. Frees hands for work. Use for welding, soldering, assembly marking off and pipe installation.

Quality, stainless steel, 0 - 200mm/8", digital vernier calipers with 4-function measurement: internal, external, depth and step. Thumb wheel fine adjustment and zero setting at any position. Large, easy-to-read display. Accurate to 0.01mm/0.0005".

High carbon steel vernier caliper resolution 0 - 150 x 0.02mm. 4-function measurement: internal, external, depth and step. Storage case.

Compact 500mA constant output plug-in charger. Suitable for trickle charging 12V lead acid batteries. Crocodile clip connectors. Cable length 1.6m.

Chrome vanadium steel blades with high leverage, compound cutting action. Sprung handles with safety lock, slip guards and colour-coded plastic grips for straight, left and right cuts. Suitable for cutting aluminium, mild steel and stainless steel sheet, uPVC sheet, wire mesh, leather, copper and plastic. Cutting capacity: aluminium sheet 1.2mm, mild steel sheet 0.8mm, stainless steel sheet 0.6mm. Jaw capacity 20mm. Length 240mm.

Brass bristles and hardwood handle. For cleaning spark plugs. Length 200mm.

Metric set of open and bi-hexagonal ends with 15° offset for greater access. Hardened and tempered, drop-forged chrome vanadium. High-quality fully polished finish. Ultra-strong ballistic nylon storage roll. Includes sizes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22 and 24mm.

Combination set of Open and bi-hexagonal ends with 15° offset for greater access. Hardened and tempered, drop-forged chrome vanadium. High-quality fully polished finish. Ultra-strong ballistic nylon storage roll. Includes metric sizes: 6, 8, 9, 10, 11, 12, 13, 14, 17, 19 and 22mm; AF sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" and 7/8".

Heavy duty metal base featuring reinforced spring holder. Supplied with cleaning sponge. 85 x 125mm Base

Pre-tinned soldering tips with 3.8mm external diameter. This set is compatible with soldering iron part number 'Soldiron2'. Includes 3 x point, 3 x chisel, 2 x bent and 2 x cut-off tips.

General purpose soldering iron suitable for a wide range of electrical soldering of circuits, medium-thick wires and cables. Supplied with precision-point tip. Temperature range 420-480°C.

For general purpose, in-vehicle soldering and model making. Ideal for use on circuit boards, thin wires and delicate components. 12V plug with a 1.3m cable. Temperature range 450 - 480°C. Includes straight, precision soldering tip and element cover.

Tungsten carbide pin point for detailed work. Chrome-plated body with steel pen clip.

Produced from GCr15 bearing steel. Includes: 3 - 6, 6 - 8, 8 - 11, 11 - 14, 14 - 18 and 18 - 25mm. Drills: 2 - 9.3mm, made from HSS 4241 and black oxide coated.

Strong, hardened GCr15 bearing steel screw extractors with tapered design for multiple fixing sizes. For use with all types of power drill in reverse mode. Reverse-threaded shafts enable combined bite and removal of broken screws and bolts in one action. Requires pilot hole of around 50% screw/bolt diameter. Includes sizes 1/8" - 1/4"/M3 - M6, 1/4" - 5/16"/M6 - M8, 5/16" - 7/16"/M8 - M11, 7/16" - 9/16"/M11 - M14, 9/16" - 3/4"/M14 - M18, 3/4'' - 1''/M18 - M24.

Fully hardened chrome vanadium steel blades with hardened, satin finish and magnetic tips. High-impact plastic handles. Includes 6 x Pozidriv: 0 x 75, 1 x 75, 2 x 38, 2 x 100, 2 x 150 and 3 x 200mm, and 6 x slotted: 3 x 75, 5 x 75, 6 x 38, 6 x 100, 6 x 150, and 8 x 200mm.

Chrome vanadium and tempered blades on 325mm shafts. Blackened magnetic tips. Comfortable soft-grip handles. Ideal for accessing recessed screws. Includes Phillips PH0, PH1 and PH2, and slotted 5.5, 6.5, and 8.0mm.

Etched metric & imperial graduations and clear, easy-to-read markings. Includes hanging holes for storage. 150 & 300mm

Sprung steel band with all-steel ratchet mechanism. For easy installation of pistons into cylinders. Includes steel adjusting key. 54 - 127 x 75mm

Brass bodied automatic centre punch with hardened tip.

Stainless steel with brass locking nut. Dual marked from 0 - 180º in 1º increments. 150mm arm, 65mm gauge.

25mm Corrosion-resistant brass wire bristles, galvanized steel stem. For cleaning drill holes and internal bores.

19mm diameter Corrosion-resistant brass wire bristles, galvanized steel stem. For cleaning drill holes and internal bores.

1/2" (13mm) Corrosion-resistant brass wire bristles, galvanized steel stem. For cleaning drill holes and internal bores.

Hand-held multimeter measures DC and AC voltage, DC current and resistance. Also checks continuity diodes NPN and PNP. Large digital display for easy readings. Includes test leads. Requires 1 x 9V (PP3) battery not supplied.

Heavy duty chrome vanadium steel. Hardened and tempered jaws. 2-tone soft-grip handles with slip guards. 200mm

Fully reversible action (clockwise / anti-clockwise). Soft-grip handle with protective guard. 1/2" square drive attachment can be used with sockets. Includes 13 x S2 steel bits: Phillips PH1, PH2, PH3 & PH4; slotted 5, 6, 8, 10 & 12mm; hex 4, 5, 6 & 8mm. Satin finish. Storage case

Coin-type tool with flanged hole to adjust the side wire without damaging the centre element and outer rim to measure the electrode gap. Metric 0.5 - 2.55mm, imperial 0.02 - 0.1". Solid alloy steel.

Soft, non-slip rubber grips. For loosening or tightening oil filters, PVC pipes, opening jars and hose fittings. Non-marking strap will not damage fine finishes. 500 and 600mm

Tough, heat-treated carbon steel for high torque application. Rubber-coated feet for improved grip. Corrosion-resistant electro plating. Self-tightening mechanism grips filters from 60 - 110mm. For gripping filters with flat faces only. 3/8" square drive. 60 - 110mm

Drop-forged alloy steel with PVC double-dipped handles for comfortable grip. Phosphate coated for corrosion resistance. Allows easy removal of filters. Jaw capacity 45 - 135mm.

8" rasps (flat, half-round and round) and 8" files (flat, half-round, round, triangle and square) with file cleaning brush. Includes nylon wallet.

Heavy duty chrome vanadium steel. Hardened and tempered. 2-tone soft-grip handles with slip guards.

Automotive circuit tester with 900mm insulated cable and earth clip. Insulated contact point prevents accidental shorting. Checks electrical system circuits and accessories on 6V and 12V systems quickly and easily.

Solid rubber head and hardwood shaft. Head secured with glue and pin. For soft striking of woodworking chisels, forming sheet metal, and easing components.

Spiral cut teeth provide a positive grip to remove rounded or damaged bolts. Can also be used on screw heads and studs. Will fit heads sized 9, 10, 11, 12, 13, 14, 15, 16, 17 and 19mm. Can be driven with a metric spanner or socket. Storage case included.

Side Closing Pincers for 'O' Clips

Combination leaf feeler gauge accurately measures gaps between components. Hardened and polished carbon steel leaves clearly marked with sizes. 26 leaves 0.051mm to 0.635mm thicknesses.

1 lb (one pound) ball pein hammer. Forged steel head and shock-absorbing, high-strength fibreglass shaft with nylon surround. Polished and lacquered chamfered striking face and ball end. High-grip handle is resistant to oil and chemicals. For striking and shaping metal objects.

2lbs (900g) head ball pein hammer. Forged steel head and shock-absorbing, high-strength fibreglass shaft with nylon surround. Polished and lacquered chamfered striking face and ball end. High-grip handle is resistant to oil and chemicals. For striking and shaping metal objects.

1/2 lbs ball pein hammer. Forged steel head and shock-absorbing, high-strength fibreglass shaft with nylon surround. Polished and lacquered chamfered striking face and ball end. High-grip handle is resistant to oil and chemicals. For striking and shaping metal objects.

Carbon steel with zinc-plated yoke and bolts. Multi-purpose balancer puller set for removing flywheels, balancers and pulleys. Imperial and metric bolts. Minimum / maximum spread: 40 - 93mm. Includes bolts, yoke, washers, thrust bolt, centring adaptor, flat shaft adaptor and tough storage case.

Chrome vanadium steel construction. For insertion and removal of both internal and external circlips. Ergonomic polypropylene handle with slip guards. Includes handle with 4 x interchangeable heads (2 x straight, 1 x 45° and 1 x 90°). 160mm

Nickel-plated carbon steel for corrosion resistance and comfortable vinyl-dipped handles. Sprung mechanism for fine control. Installs and removes piston rings from 1.2mm up to 6.4mm (1/4") without twisting.

Socket set includes 2 x spark plug sockets, reversible ratchet, speed brace, sliding T-bar, universal joint, 2 x extension bars (125mm and 250mm), 2 x adaptors (1/2" female – 3/8" male and 3/8” female - 1/4" male), 17 x metric sockets (10 - 27mm), 15 x AF sockets (3/8", 7/16", 15/32", 1/2", 9/16", 19/32", 5/8", 11/16", 3/4", 25/32", 13/16", 7/8", 15/16", 1", 1-1/8") and blow moulded carry case.

100W soldering gun for work on cables and sheet metal. 30W soldering iron with fine-point tip for precision work. For electronics, household and automotive wiring. Soldering iron temperature range 390-450°C, soldering gun temperature range 500-550°C. Includes soldering iron stand, resin flux, solder dispenser with solder, de-soldering tool, spare soldering gun tip, fully adjustable magnified helping hands and a robust carry case.

Heavy duty, intelligent 3-stage starter charger for 6V and 12V vehicle batteries. Leisure, deep-cycle, regular lead acid, AGM and gel cell batteries can be charged in or out of vehicles by trickle charge or a fast charge. Built-in heavy-duty clamps for quick and secure connection to battery terminals. Features start mode that provides a boost to weak batteries, which assists in starting vehicles. Intelligent microprocessor detects battery charge percentage and alternator effectiveness automatically by cycling through the large digital display. Includes built-in heavy duty clamps, robust all-metal construction housing, convenient carry handle and instructions. 8-180Ah Capacity UK

Superb, locally made by a Master Saddler from Malvern. Green canvas/hessian tool roll, stitched leather tool holder strap with 7 adjustable tool holder canvas loops, two internal canvas flaps and large pocket at one end with cloth stitched edging. Leather securing strap with nickel plated buckle. Dimensions when open 72cm x 29cm.