Chrome on brass, dished handmade stoneguard, 5.5" diameter suitable for protecting smaller spot and fog lamps. Will require mounting bracket to hold in position. 11mm mesh aperture, 1 1/4" dish depth. EACH

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plate finish (polished brass by special order) or a special configuration for MG with thinner rims. Please select from the options below. Sold in PAIRS only. For L140, L148 etc. type lamps. -- Quality flat headlamp stone guards 8" (approx 203mm) diameter, thin rims with diagonal mesh as used on the early MGs (except late TC's), which are attached by three knurled, polished stainless steel nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass. Sold in PAIRS only.

Base mounted stone guard with 7 1/2" diameter mesh - for 7" spot lamps e.g. the CLR700 Lucas type lamp. Chrome plated cast bronze base, fitted with stainless steel 1" diameter knurled knob, bolt (profiled to grip the stone guard rim) and split spring washer. Chrome plated brass stone guard rim and brass mesh, with wire curled around the rim in the traditional manner. 67mm from centre of base mount hole to stone guard rim. 30mm deep dish in guard (out from rim). A quality reproduction of the original Lucas design available in the 1950's and 1960's

Base mounted stone guard with 6" diameter mesh - for 5 3/4" diameter '576' series Lucas type spot and fog lamps, as well as Lucas FT27 type spot lamps. Chrome plated cast bronze base, fitted with stainless steel 1" diameter knurled knob, bolt (profiled to grip the stone guard rim) and split spring washer. Chrome plated brass stone guard rim and brass mesh, with wire curled around the rim in the traditional manner. 50mm from centre of base mount hole to stone guard rim. 20mm deep dish in guard (out from rim). A quality reproduction of the original Lucas design available in the 1950's and 1960's

Quality flat headlamp stoneguards 7" (approximately 178mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in polished brass or nickel finish by special order - please enquire. Sold in PAIRS only. Please note that these guards are NOT intended to be used on headlamps which are built into the body with an external trim rim - they are intended for use on free standing vintage lamps with near flat lenses.

7" (178mm) domed/convex stone guards for standard Lucas 700 series type classic car lamps. Held in position with three clips which locate behind the headlamp rim - no drilling of holes is required. Supplied in pairs only. Only stainless steel finish currently available.

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. --

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. --

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L165, L166 etc. type lamps. --

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L165, L166 etc. type lamps. --

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L150 etc. type lamps. --

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L150 etc. type lamps. --

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plate finish (polished brass by special order) or a special configuration for MG with thinner rims. Please select from the options below. Sold in PAIRS only. For L140, L148 etc. type lamps. --

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plate finish (polished brass by special order) or a special configuration for MG with thinner rims. Please select from the options below. Sold in PAIRS only. For L140, L148 etc. type lamps. --

7" (178mm) domed/convex stone guards for standard Lucas 700 series type classic car lamps. Held in position with three clips which locate behind the headlamp rim - no drilling of holes is required. Supplied in pairs only. Only stainless steel finish currently available. --

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plate finish (polished brass by special order) or a special configuration for MG with thinner rims. Please select from the options below. Sold in PAIRS only. For L140, L148 etc. type lamps.

Quality flat headlamp stone guards 8" (approx 203mm) in diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plate finish (polished brass by special order) or a special configuration for MG with thinner rims. Please select from the options below. Sold in PAIRS only. For L140, L148 etc. type lamps. --

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L150 etc. type lamps. --

Quality flat headlamp stone guards 9" (approx 228mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L150 etc. type lamps.

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L165, L166 etc. type lamps. --

Quality flat headlamp stone guards 10" (approx 254mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. For L165, L166 etc. type lamps.

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only.

Quality flat headlamp stone guards 12" (approx 305mm) diameter, which are attached by three polished stainless steel knurled nuts (supplied) to the headlamp rim - which needs to be drilled. Chrome on brass mesh, rim and side fittings. Available in nickel or chrome plated finish. Sold in PAIRS only. --