Chrome cowl shields the glass lens, equivalent to the Lucas type L534 lamp. Base approx 60mm x 40mm. A good value low cost reproduction with some pressing marks under the chrome.

Quality reproduction of a reversing/number plate lamp of the Lucas L469 pattern. Chrome on brass construction with frosted main lens. 163mm x 40mm x 60mm deep. Two mounting bolts to rear 77mm centres. Applications include Aston Martin, Jaguar XKs Rover P4, Jensen 541, Alvis, Lagonda and Allard.

New old stock original Lucas panel lamp, part number 54057245. Marked 'Butlers England'. Butlers part number BU/1572/S. Takes a BA9S base bulb. Complete with mounting stud nuts and washers, wired connection finishing in a 6.3mm female LUCAR connection. Applications include Massey Ferguson MF135, 165, 185 tractor dash/panel lamp. A really nice original part.

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres, clear glass side lens, chrome OR black powder coated steel body. Uses BA9S base type bulb x 2  Incandescent 12v = B989BB Incandescent 6v = B113B LED 12v Warm White = B233LEDWW LED 12v White = B233LEDW LED 6v Warm White = B293LEDWW-A LED 6v White = B293LEDW-A

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres, clear glass side lens, chrome OR black powder coated steel body. Uses BA9S base type bulb x 2  Incandescent 12v = B989BB Incandescent 6v = B113B LED 12v Warm White = B233LEDWW LED 12v White = B233LEDW LED 6v Warm White = B293LEDWW-A LED 6v White = B293LEDW-A -- Uses BA9S base type bulb x 2  LED 12v Warm White = B233LEDWW LED 12v White = B233LEDW LED 6v Warm White = B293LEDWW-A LED 6v White = B293LEDW-A

Compact light bolt, Purchased from Texas & used in the US for number plate lamp. . These neat stainless steel bolts have an LED micro-light that sines through one side to provide number plate illumination. Can also be used as a dash light. 12.5mm diameter x 14mm tall, overall length including thread 33mm.

Small metal covered lamp with opaque plastic lens for various applications. Base 70mm x 33mm, two screw fixings 51mm apart. Lamp body protrudes approx 25mm. Please note that this lamp is fitted with a Wedge T10 base capless bulb - available in 6 or 12 volt. For spare bulbs, please see our B501-6V or B501-12V or LED equivalents.

Quality reproduction equivalent to the Lucas 467 lamp model, as fitted to numerous classic vehicles. Base 110mm x 46mm x 36mm high (40mm including cover fixing bolt), fixing studs 85mm centres, clear glass side lens, chrome OR black powder coated steel body. Uses BA9S base type bulb x 2  Incandescent 12v = B989BB Incandescent 6v = B113B LED 12v Warm White = B233LEDWW LED 12v White = B233LEDW LED 6v Warm White = B293LEDWW-A LED 6v White = B293LEDW-A -- Uses BA9S base type bulb x 2  LED 12v Warm White = B233LEDWW LED 12v White = B233LEDW LED 6v Warm White = B293LEDWW-A LED 6v White = B293LEDW-A

550 or "Frogeye" type number plate lamp. Used on Triumphs & GT40 MK1 cars. Chrome on brass cover 48mm x 35mm. Made from our own tooling. 

Painted cowl type number plate lamp with glass lens, two bolt mounting with 45mm hole centres, supplied with two cables fitted with terminals ( one bullet, one eyelet. ) and waterproof cable grommet. cowl held with two raised countersunk screws for easy bulb replacement.

High quality chrome number plate lamp equivalent to Lucas lamp type L860. Used on Aston Martin, MG, Triumph etc. Mounting hole centres 58mm. Supplied with rubber mounting pad and red and black bullet ended wires. Lamp body 40mm wide, 72mm high and 55mm deep.

Number plate light as originally fitted to the chrome bumper MGB but other applications. 60mm x 35mm.