Handbrake light switch equivalent to Lucas part number SMB479. Alternative part number 31893. 1/4" x 28 tpi UNF thread. Normally closed switch, push to break connection. Applications include, Jaguar E Type and XJ6, Land Rover (Series I to III) and some Lotus Elan models.

12 volt remote starter button. Mount under the bonnet for ease of starting the engine whilst you're working on the car. Equivalent to Lucas part numbers SRB316, 2ST. For spare rubber button cover and insulator rubber, please see part numbers 621 and 622

Solenoid starter switch with aluminium rim, plastic body, metal lock nut and twin Lucar/6.3mm spade connectors

Ivory colour - Solenoid starter (spring loaded) switch metal twin screw connectors. 22.5mm hole fixing. Short type for metal dash. Maximum dash thickness 5mm. Supplied complete with plastic lock nut

Surface mounted, metal cased push button. Suitable for horn press button etc. Mounting hole centres 53mm, chrome rim approx 41mm diameter, black button.

Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch type SS5, 31107, SPB105, 31967. Originally available in Black ( part number 413), Ivory (part number 413-IV, equivalent to Lucas part number 31272) and Brown (Lucas part number 31107) --

Push button (spring loaded) black knob, 22mm diameter chrome bezel, short type for metal dash. Maximum dash thickness 7mm. Requires 19mm hole. Makes contact when pushed. Equivalent to Lucas switch type SS5, 31107, SPB105, 31967. Originally available in Black ( part number 413), Ivory (part number 413-IV, equivalent to Lucas part number 31272) and Brown (Lucas part number 31107)

HP19/SPB160 horn push button engraved 'Klaxon'. Flanged for mounting on to dash. Button head approx. 38mm diameter. Mounting flange 53mm x 35mm with two screw holes.

Aluminium body with black push button, two terminals, for wooden dash. This button is very similar to the vintage Bosch model but has a clip-on cover in place of the early threaded design. 1 3/8'' (35mm) diameter.

Plated brass momentary push switch with stainless push button.   6amps at 12v. Requires approx. 19mm hole, long thread (15mm) on switch, total length 34mm.

Push button with flange for mounting on to dash, button head approximately 38mm diameter. Mounting flange 53mm x 35mm with two screw hole (hole centres 42mm). Equivalent to Lucas part numbers HP19, 76205 and SPB160. Most commonly used as a horn push.

Hazard flasher warning switch kit (12v only). Switch with illuminated knob and flasher unit mounted onto a small bracket with cover for mounting underneath the dash or steering column, which wires into the existing indicator flasher system and operates all four flasher lamps at once. Equivalent to Lucas part number SFB300 (30269). General application including classic Land Rover and Jaguar.

Push button dash switch. Equivalent to Lucas part number SPB106. Suitable for a starter solenoid. Used on many classic vehicles including on some AC cars as a horn push. 11 amps at 12v. Dash mounted, requiring an approximate 20mm hole. Two 6.3mm Lucar/ spade connections

Starter-solenoid rubber button cover - for part CA1400, equivalent to Lucas part 760130. Dimensions 27mm diameter x 17mm tall with a 17mm opening.

Starter-solenoid terminal insulator rubber, equivalent to Lucas part 764272

Push button (spring loaded) black knob, 22mm diameter chromium bezel, long type for wooden dash, maximum dash thickness 20mm. Requires 19mm hole. Makes contact when pushed. Screw terminal connection, equivalent to Lucas 31363, SPB106

Starter push button switch (Ford 1937-48 style) 15A at 6V, 20A at 12V. Button diameter 11mm, overall diameter 26mm, hole size required approx. 22mm