Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Large four colour enamel badge, for the tops of some larger Lucas lamps, 19.3mm wide x 22.5mm tall. Nickel plated.
Large, four colour enamel badge, for the tops of some larger Lucas lamps, 19.3mm wide x 22.5mm tall. Chrome plated.
'Red dot' tell tale medallion for Lucas type 1130, LD109 etc side lamps. Overall dimensions 14mm diameter x 6.25mm deep. To fit 11.5mm hole.
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm.
Smiths type lamp badge medallion. 16mm diameter across the top 15mm approx below lip, fits into a 15mm hole. Marked Smiths across the top and London at the bottom, MA in a circle in the centre, nickel plated finish.
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm -- large size approx 25.6mm diameter, requires approx 22mm hole
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm -- approx 23mm diameter requires 20.3mm hole
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm -- approx 22mm diameter requires 19.1mm hole
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm -- approx 18.3mm diameter requires 15.6mm approx hole
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm -- approx 15.7mm diameter, requires approx 12.6mm hole.
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. --
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. -- Available in Nickel
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. --
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. --
Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available in chrome or nickel plated finish. --
BRC lamp oval plate - engraved copper. Marked 'B.R.C. lenticulaire parabolique No (space for entry) Generateur ALPHA'. Measures 59mm x 26mm
Reproduction Rotax type lamp badge/medallion. Chrome plate on brass casting with lugs on rear to peen over and secure medallion in lamp body as original. We stock the following sizes, measured across outside of badge: Very small - 15.7mm Small - 18.3mm Medium - 22.0mm Medium large - 23.0mm Large - 25.6mm
Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available in chrome or nickel plated finish.
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. --
Reproduction 'King of the Road' Lucas type lamp medallion. Chrome plated brass pressing with lugs on rear to peen over and secure the medallion on the lamp body as original. We stock the following sizes (measure overall diameter of badge). Reference A - Very small, 15.1mm Reference AC - Very small, curved (for fitting to 1130 lamp bodies), 15.1mm. Reference B - Small, 16.8mm. Reference C - Medium small, 19.7mm. Reference D - Medium, 22.7mm. Reference E - Large, 28.8mm. -- Curved in the correct direction for fitting to an 1130 type torpedo side lamp
Desmo bronze badge/medallion, 19mm in diameter with a 2mm rivet hole in the centre. Marked 'Desmo' across the top, with winged car motif in the centre and 'Birmingham' across the bottom, available in chrome or nickel plated finish. --