12 volt double contact BA15d HALOGEN 60/55 watt double filament bulb. Dimensions 14mm diameter glass tube x 56mm tall with 15mm diameter cap. Use headlight. A twin filament bulb with filament shield for dip beam and unshielded mainbeam - offering the performance of the modern H4 60/55w type bulb on a traditional BA15d base! Manufactured by classic bulbs in response to demand for a high performance halogen bulb alternative to incandescent bulbs B171 and B1248, as well LED Ba15d upgrade options see part numbers BA15DLED-H30, BA15DLED-H43, BA15DLED-H30L, BA15DLED-H43L and BA15DLED-P43. For a single filament Halagen BA15S bulb please see part number B795. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new website www.classicbulbs.co.uk. If you place an order on the Classic Bulbs, Complete Automobilist and SVC  and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V bulb rated at 60W. Single contact BA15S base. Single axial filament. Clear glass globe 38mm diameter. B90 superceded other early 60W Lucas bulb numbers B20, B29 and B186. As fitted to many spotlamps including the lucas FT37. For a double contact BA15 60W bulb, please see part number B26.

12V bulb rated at 60W, BA15D Double contact base, 38mm globe diameter. 40mm bulb height. Single axial filament. For a single contact BA15 60W bulb, please see part number B90.

Upgraded performance 12v 60/55w H4 mega light bulbs +150% light, longer lasting with a whiter light and longer beam. E1 approved. Ring brand pack illustrated, Autolamps brand packs may be supplied also depending on stock availability.

12V H4 bulb rated at 60/55W with standard fit P43T base. Clear glass with black cap. E Marked.

12V H4 bulb rated at 45/40W with standard fit P43T base. Lower wattage suitable for halogen headlamp conversions on older vehicles. Clear glass with black cap. E Marked.

6V H4 bulb rated at 35/35W with PX43T base - centre tab is wider than standard H4 P43t fitting. Lower wattage suitable for halogen headlamp conversions on older vehicles. Clear glass with black cap. For a brighter Halogen bulb please see B910B. For LED options, please see P43TLED-H43L

12V Halogen H3 bulb rated at 55W, PK22S base. Clear glass. E marked.

12V Halogen H3 bulb rated at 20W, PK22S base. Clear glass.

12V Performance H1 halogen bulb rated at 55W + 50% more light. P14.5S base. 8.5mm glass diameter. E marked. Blister pack.

12V H1 halogen bulb rated at 55W. P14.5S base. Clear tubular glass. 8.5mm glass diameter. E marked.

6V H1 halogen bulb rated at 55W. P14.5S base. Clear tubular glass. 8.5mm glass diameter. E marked.

High performance CSP 1860 LED upgrade for British Pre-focus headlamp bulbs with the P36D base. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B370 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. Not ideal for Tripod headlamps, in which instance use P36DLED-S30 for suitable beam pattern for Tripod Headlamps  This bulb is a great LED alternative to a number of 12 and 24V british Pre-focus bulbs with dipped beam filament shields including B370, B414B and B437. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P36DLED-P43-6 for a 6V, negative or positive earth version. Please see part numbers P36DLED-S30 and P36DLED-S43 for British Pre-focus headlamp bulbs with twin transverse filaments without filament shields. And P36DLED-H30L and P36D0LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

30 x 4014 SMD LED BA15D 6 & 12 Volt multi-directional 600 Lumen warm white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED upgrade and replacement for B381B and B3212A double filament type bulbs with BA15D double contact base. Dual polarity. In testing, comparable in brightness to conventional 5/21W bulbs with the benefits of LED. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a brighter white light pelase see B381LEDW and for a red version of this dual brightness lamp see B381LEDR

30 x 4014 SMD LED BA15D 6 &12 Volt multi-directional 600 Lumen bright white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED upgrade and replacement for B381B and B3212A double filament type bulbs with BA15D double contact base. Dual polarity. Comparable in brightness to conventional 5/21W bulbs in testing, with the benefits of LED. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warm white version of theis LED see B381LEDWW and B381LEDR for a red version.

12 x 3014 SMD LED BA15D 12 Volt multi-directional warm white lamp. LED upgrade for B209B c5w single contact bulbs with BA15D double contact base. Much brighter than 5W bulbs in testing. Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb.

12 x 3014 SMD LED BA15D 6 Volt multi-directional warm white lamp. Dual brightness LED bulb with 6 to 9v input voltage range. BA15D double contact base. Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb. Wire the preferred brightness.

12 x 3014 SMD LED BA15S 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B207B and B245B. In testing, brighter than B245B (10W). BA15S base. Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb.

12 x 3014 SMD LED BA15S 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B207B and B245B. In testing, brighter than B245B (10W). BA15S base. Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb.

12 x 3014 SMD LED BA15S 6 Volt multi-directional warm white lamp. LED upgrade and replacement for B205. BA15S base. In testing, comparable in brightness to 6V incandescent bulb B205 (5W). Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb.

8 x 5050 SMD LED BA15S 12 Volt multi-directional warm white lamp. LED upgrade and direct replacement for B309A. BA15S base. Brighter than original c15W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, warning lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover.

9 x 5050 SMD LED BA15S 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B309A. Brighter in testing than incandescent c15W bulb B309A. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, warning and number plate lights.

8 x 5050 SMD LED BA15S 12 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B309A. BA15S base. Brighter than original 12V c15W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights and repeaters, warning and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover.

9 x 5050 SMD LED BA15S 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B309A. LED equivalent to incandescent 12V c15W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights, repeaters, warning and number plate lights.

8 x 5050 SMD LED BA15D 6 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B315. BA15D base. Brighter than original c10W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover. For a warm white version see part number B315LEDWW.

8 x 5050 SMD LED BA15D 6 Volt multi-directional warm white lamp. LED upgrade and direct replacement for B315. BA15D base. Brighter than original c10W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover. For a bright white version please see part number B315LEDW

8 x 5050 SMD LED BA15S 6 Volt multi-directional warm white lamp. LED upgrade and direct replacement for B244. BA15S base. Brighter than original c10W bulbs. In testing, brighter than 6V incandescent bulb B244B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover.

9 x 5050 SMD LED BA15S 6 Volt multi-directional warm white lamp. LED upgrade and direct replacement for B244. LED equivalent to c10W bulbs. In testing, brighter than 6V incandescent bulb B244B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 37mm total bulb length, 20mm head diameter, no cover.

8 x 5050 SMD LED BA15S 6 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B244. BA15S base. Brighter than original c10W bulbs. In testing, brighter than 6V incandescent bulb B244B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover.

9 x 5050 SMD LED BA15S 6 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B244. LED equivalent to c10W bulbs. In testing, brighter than 6V incandescent bulb B244B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 37mm total bulb length, 20mm head diameter, no cover.

6 x 5730 SMD LED WEDGE T10 12 Volt multi-directional WHITE lamp. Very bright 5730 LEDs. A great white LED upgrade bulb for B955 (16W) with T15 WEDGE base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright White 6000k colour temperature. Much brighter in testing than B955 (16W) and more comparable with B921 (21W). For even brighter LED altenatives with integral lenses, please see part numbers B921ALED and B921LEDW

5 x 5050 SMD LED WEDGE T10 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B501 T10 WEDGE type bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 29mm total bulb height, 11mm LED section diameter. A very popular LED bulb. For LED alternatives of comparable brightness please see B501LEDW-A and B117LEDWW-A

5 x 5050 SMD LED WEDGE T10 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B501 T10 WEDGE type bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 29mm total bulb height, 11mm LED section diameter. A very popumar LED bulb. For LED alternatives of comparable brightness please see B501LEDWW-A and B117LEDWW-A

8 x 2835 SMD LED WEDGE T10 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B504 3W and B501 5W bulbs with WEDGE T10 base. Brighter than conventional 5W bulb. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 22mm total bulb height. For a bright white light see part number B501LEDW-B, for brighter alternatives see part numbers B501LEDWW-A and B117LEDWW-A

8 x 2835 SMD LED WEDGE T10 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B501 and B510H with WEDGE T10 base. Brighter than conventional 5W bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter, 22mm total bulb height. For a warm white light see part number B501LEDWW-B, for brighter alternatives see part numbers B501LEDWW-A and B117LEDWW-A

20 x 2835 SMD LED WEDGE T10 12 Volt multi-directional very bright white lamp. LED upgrade bulb with WEDGE T10 base. Brighter in testing than T15 bulbs B922 (10W) and comparable to B955 (16W). Compatible with negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 32mm total bulb length, 11mm LED section diameter. For a brighter alternative please see part number B501LEDW-D

6 x 5730 SMD LED WEDGE T10 12 Volt multi-directional AMBER lamp. 6 x 5730 LEDs. An Amber LED lamp with T10 WEDGE base comparable in brightness to c5W incandescent lamps. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. AMBER colour temperature.

8 x 2835 SMD LED WEDGE T10 6 Volt multi-directional bright white lamp. LED upgrade and replacement for B117B with WEDGE T10 base. Brighter than conventional 5W bulb. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter, 22mm total bulb height. For some 6V T10 LED alternatives please see B117LEDWW-A, B117ALEDWW and B500LEDW-C

8 x 2835 SMD LED WEDGE T10 6 Volt multi-directional warm white lamp. LED upgrade and replacement for B117A with WEDGE T10 base. Brighter than conventional 3W bulb. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 22mm total bulb height. For some brighter 6V T10 LED alternatives please see B117LEDWW-A, B117BLEDW and B500LEDW-C

80 Lumen Osram LED WEDGE T10 multi-directional warm white lamp, with diffused glass bulb. Accepts input voltages between 6 and 45V. A high specification LED upgrade and replacement for B117B type bulbs with WEDGE T10 base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 10mm maximum diameter, 26mm total bulb height. Much brighter than B117B in testing. For other 6V T10 LED alternatives please see B117ALEDWW, B117BLEDW and B117LEDW-A

80 Lumen Osram LED WEDGE T10 multi-directional bright white lamp, with diffused glass bulb. Accepts input voltages between 6 and 45V. A high specification LED upgrade and replacement for 5W bulbs with WEDGE T10 base e.g. B117B, B501, B507. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 10mm maximum diameter, 26mm total bulb height. Much brighter than B117B and B501 in testing. For other 6V T10 LED alternatives please see B117ALEDWW, B117BLEDW and B117LEDWW-A

Warm White 8 x 2835 SMD 50 Lumen LED 12V lamp with flat LED cluster for single direction light applications. MES E10 base. Brighter than original c5W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 19mm total bulb height.

8 x 2835 SMD LED MES E10 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B208 type bulbs. MES E10 base. Brighter than original c5W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 23mm total bulb height.

Bright White 8 x 2835 SMD 50 Lumen LED 12V lamp with flat LED cluster for single direction light applications. MES E10 base. Brighter than original c5W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter, 19mm total bulb height.

9 x 1210 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. MES E10 base. Equivalent to original c4W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 18mm total bulb height.

8 x 2835 SMD LED MES E10 6 Volt multi-directional warm white lamp. LED upgrade and replacement for B950 type bulbs. MES E10 base. Brighter than original c5W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter, 23mm total bulb height.

9 x 1210 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. MES E10 base. Equivalent to original c5W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter, 18mm total bulb height.

4 x 3030 SMD LED MES E10 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B987B type bulbs. MES E10 base. T10 tubular glass cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 29mm total length.

4 x 3030 SMD LED MES E10 6 Volt multi-directional bright white lamp. LED upgrade and replacement for B990 type bulbs. MES E10 base. Brighter than original c2W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature.

5 x 5050 SMD 80 Lumen LED 12 Volt multi-directional, bright white lamp. LED upgrade bulb with BA9S base. Comparable in brightness to B992 10W incandescent bulbs (Much brighter than B233 (4W) bulbs). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 29mm total bulb length, 12mm LED section diameter.

5 x 5050 SMD 80 Lumen LED 12 Volt multi-directional, warm white lamp. LED upgrade bulb with BA9S base. Much brighter than B233B c4W incandescent bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 29mm total bulb length, 12mm LED section diameter.

80 Lumen Osram BA9S multi-directional warm white lamp with diffused glass bulb. Accepts input voltages between 5 and 45V. LED upgrade and replacement for many bulbs with BA9s base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 10mm maximum diameter, 26mm total bulb height.

80 Lumen Osram BA9S multi-directional bright white lamp with diffused glass bulb. Accepts input voltages between 5 and 45V. LED upgrade and replacement for many bulbs with BA9s base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 10mm maximum diameter, 26mm total bulb height.

8 x 2835 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. BA9S base. Equivalent to original c4W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter and 18mm total bulb length.

8 x 2835 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. BA9S base. Equivalent to original c4W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter and 18mm total bulb length.

5 x 5050 SMD 80 Lumen LED 6 Volt multi-directional, warm white lamp. LED upgrade and direct replacement for B293 and B951. BA9S base. Proving brighter than c6W incandescent bulb in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 29mm total bulb length, 12mm LED section diameter. For a bright white light please see part number B293LEDW-A, for less bright LED options please see part number B293LEDW-B and B293LEDWW-B

5 x 5050 SMD 80 Lumen LED 6 Volt multi-directional, bright white lamp. LED upgrade and direct replacement for B293 and B591. BA9S base. Proving brighter than c6W incandescent bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 29mm total bulb height, 11mm LED section diameter. For a warm white light please see part number B293LEDWW-A, for less bright LED options please see part number B293LEDW-B and B293LEDWW-B

9 x 1210 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. BA9S base. Equivalent to original c4W bulbs and a good LED upgrade option for incandescent bulb B293B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm maximum diameter and 18mm total bulb length. For a warm white version please see part number B293LEDWW-B and for brighter alternatives B293LEDW-A and B293LEDWW-A

8 x 2835 SMD 50 Lumen LED 6V lamp with flat LED cluster for single direction light applications. BA9S base. Equivalent to original c4W bulbs and a good LED upgrade option for incandescent bulb B293B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. 12mm maximum diameter and 18mm total bulb length. For a bright white version please see part number B293LEDW-B and for brighter alternatives B293LEDW-A and B293LEDWW-A

4 x 3030 SMD LED MCC BA9S 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B288B 2W incandescent bulbs. BA9S base. T10 (10mm diameter) tubular glass cover. Much brighter than c2W bulbs - actually brighter than 4W B233B type bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 29mm total bulb length. For a brighter alternative please see part number B233LEDWW

4 x 3030 SMD LED MCC BA9S 6 Volt multi-directional bright white lamp. A neat LED upgrade for B287, proving significantly brighter in testing. BA9S base. Much brighter than original c2W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 100 diameter tubular glass cover, 29mm total bulb length.

4 x 3528 SMD LED BA7S 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B281B. BA7S base. Brighter than original c2W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

1 x 3030 SMD LED BA7S 12 Volt bright white lamp. BA7S base for low wattage instrument applications. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 9mm maximum diameter, 15mm total bulb height.

4 x 3528 SMD LED BA7S 6 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B282. BA7S base. Brighter than original c2W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

1 x 3030 SMD LED BA7S 6 Volt bright white lamp. BA7S base for low wattage instrument applications. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 9mm maximum diameter, 15mm total bulb height.

Very bright 5 Cree LED MCC BA9S multi-directional bright AMBER lamp. Accepts voltage input 10 to 30V. LED upgrade bulb with BA9S base comparable in brightness to 23W amber incandescent bulb B418. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Indicator application. Integral lens, 12.5mm head diameter, 45mm diameter overall bulb length. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. For a bright white version of this bulb, please see part number B419LEDW

30 x 4014 SMD LED BA15S 6 Volt multi-directional 600 lumen bright AMBER lamp. LED upgrade and replacement for B317 type single filament bulb. BA15S base. Brighter than conventional 21W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Best behind a clear lens in indicator applications - use B317LEDWW behind amber lenses. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. Maximum diameter 18mm, total bulb height 43mm.

30 x 4014 SMD LED BA15S 12 Volt multi-directional, 600 lumen, single brightness, bright RED lamp. LED upgrade and replacement for B382BR type single filament bulb. BA15S base. In testing, 50% brighter than conventional 21W incandescent bulb B382BR. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright RED colour temperature. This is NOT a combined stop & tail function bulb. Maximum diameter 18mm, total bulb height 43mm.

12 x 3020 SMD LED multi-directional super bright WHITE reversing lamp. Accepts 10 to 40V input voltage. LED upgrade for 12V B382B and 24V B241/B290 type single filament indicator bulbs. BA15S base. Much brighter than conventional incandescent bulbs in testing - twice as bright as 21W bulbs. Brighter than LED lamp B382LEDW also. Compatible with both NEGATIVE and POSITIVE earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright WHITE colour temperature. If used as an indicator an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. Though B382LEDAS and B382LEDWWS (behind amber lenses) are better for indicator application. 19mm maximum diameter, 47mm total bulb height. A warm white version of this super bright WHITE bulb is also available - please see part number B382LEDWWS.

12 x 3020 SMD LED multi-directional super bright AMBER indicator lamp. Accepts 10 to 40V input voltage. LED upgrade for 12V B343B and 24V B241A type single filament indicator bulbs. BA15S base. Much brighter than conventional incandescent bulbs in testing - twice as bright as 21W bulbs. Brighter than LED lamp B382LEDA also. Compatible with both NEGATIVE and POSITIVE earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Great results behind a clear and amber lenses. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. 19mm maximum diameter, 47mm total bulb height. Double contact BA15D versions of this super bright AMBER bulb are also available - please see part numbers B382LEDADP (Positive Earth) and B382LEDADP (Negative Earth)

12 x 3020 SMD LED multi-directional super bright AMBER indicator lamp. Accepts 10 to 40V input voltage. AMBER LED upgrade for single filament indicator bulbs with BA15D double contact base. An Amber version of B335B. Much brighter than conventional 12V amber incandescent bulbs in testing (e.g. B343B) - twice as bright as 21W bulbs. Compatible with POSITIVE earth systems only - for negative earth version see B382LEDADN. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Good results behind clear and amber lenses. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. 19mm maximum diameter, 47mm total bulb height. For single contact version of this bulb see B382LEDAS

12 x 3020 SMD LED multi-directional super bright AMBER indicator lamp. Accepts 10 to 40V input voltage. AMBER LED upgrade for single filament indicator bulbs with BA15D double contact base. An Amber version of B335B. Much brighter than conventional 21W amber incandescent bulbs in testing (e.g. B343B) - twice as bright as 21W bulbs. Compatible with NEGATIVE earth systems only - for positive earth version see B382LEDADP. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Good results behind clear and amber lenses. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. 19mm maximum diameter, 47mm total bulb height. For single contact version of this bulb see B382LEDAS

30 x 4014 SMD LED BA15S 12 Volt multi-directional 600 lumen bright AMBER lamp. LED upgrade and replacement for 12V B343B type single filament bulbs. BA15S base. In testing, over 20% brighter than conventional 21W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Best behind a clear lens in indicator applications - use B382LEDWW behind amber lenses. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. Maximum diameter 18mm, total bulb height 43mm. For an even brighter 12V (or 24V) AMBER BA15S LED bulb upgrade, please see part number B382LEDAS

30 x 4014 SMD LED BA15S 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B382B single filament type bulb. BA15S base. In testing, approximately 30% brighter than conventional 21W incandescent bulb B382B, more comparable to 23W bulb B337B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Good for Reverse applications, though the bright white colour temperature can 'wash out' coloured lenses, so  B382LEDWW or B382LEDA are better for indicator applications with amber and clear lenses respectively. Maximum diameter 18mm, total bulb height 43mm.

12 x 3020 SMD LED multi-directional WARM WHITE warning/indicator lamp. Accepts 10 to 40V input voltage. LED upgrade for 12V B382B and 24V B241/B290 type single filament indicator bulbs. BA15S base. Much brighter than conventional incandescent bulbs in testing - twice as bright as 21W bulbs. Brighter than LED lamp B382LEDWW also. Compatible with both NEGATIVE and POSITIVE earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. WARM WHITE 3000k colour temperature. Warm white is good for behind amber lenses. If used as an indicator an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. For an AMBER version of this bulb please see part number B382LEDAS 19mm maximum diameter, 47mm total bulb height. A bright white 6000k colour temperature version of this warm white bulb is also available - please see part number B382LEDWS.

High quality LED upgrade with aluminium heatsink for H3 lamps with the PK22S base. D9 (S) series lamp with two 5530 LEDs rated at 16W, 1400 Lumen combined. Replaces a standard H3 bulb in the same size envelope. Flexible application - 12V and 24V input. One high power LED on each side of the lamp body. In testing, these lamps proved brighter than 12V B453 (55W) and 12V B483 (100W) when installed in a lamp, with a bright white look. Very low current draw - less than 40% of 55w halogen bulbs, so great for low powered electrical systems. 6500K bright white colour temperature. Plug and play upgrade for H3 bulbs. Powerful, high performance lighting with reduced current consumption in a compact package. This high performance LED is a great upgrade alternative to a number of halogen bulbs including B453, B483 and B460. Premium construction from aviation grade aluminium. Total LED height 41mm. One 6.3mm spade connection on a 100mm long tail. A great LED upgrade for 978 style Fog, Reversing and Indicator lamps.

High quality LED upgrade with aluminium heatsink for H1 lamps with the P14.5S base. D9 (S) series lamp with two 5530 LEDs rated at 16W, 1200 Lumen combined. Replaces a standard H1 bulb in the same size envelope. Flexible application - 12V and 24V input. One high power LED on each side of the lamp body. In testing, these lamps proved a bright yellow light when installed in a 5 3/4" spot lamp fo fog lamp applications. Very low current draw - less than 40% of 55w halogen bulbs, so great for low powered electrical systems. 2500K yellow colour temperature. Plug and play upgrade for H1 bulbs - with a lower space requirement than H1LED-PP30. Powerful, high performance lighting with reduced current consumption in a compact package. Premium construction from aviation grade aluminium. Total LED height 60mm. One 6.3mm spade connection. These lamps can be used with the H1UPGRADE kit to replace British Pre-focus bulbs in some spot lamp .

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812B and B1292B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H25YTR and BA21LED-H30TR for Yellow and warm White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H25YTR and BA21LED-H43TR for Yellow and bright White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 6000K bright, white colour temperature. This bulb is a great LED upgrade alternative to single contact APF incandescent bulbs - 6V, 36W part number BA5679 and 12V, 42W part number BA5678. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm SINGLE contact base with 30mm diameter pre-focus plate. For a softer, warm white version of this bulb please see part number APFLED-S30TR.

Warm white, High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for Bosch and Lucas head and spot lamp bulbs from the '30s to the '50s with the BA20S (single contact) base. Flexible application - suitable for 6, 12 and 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V single filament bulbs from 35W to 50W including 6V B130, 12V B421, B96 & B96T and 24V B398. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 72mm total bulb height, 12 x 25mm LED section. 20mm diameter cap. For a brighter white version of this LED lamp please see part number BA20SLED-S43TR

Bright white, High quality 16 x transverse Cree 2525 (with heatsink) LED upgrade for Bosch and Lucas head and spot lamp bulbs from the '30s to the '50s with the BA20S (single contact) base. Flexible application - suitable for 6, 12 and 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 6000K bright, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V single filament bulbs from 35W to 50W including 6V B130, 12V B421, B96 & B96T and 24V B398. Made from aviation grade aluminium.These bulbs don't have an integral lens so can be used in tripod type lamps. 72mm total bulb height, 12 x 25mm LED section. 20mm diameter cap. For a softer, warm white version of this LED lamp please see part number BA20SLED-S30TR

Bright white, high-quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than 12v incandescent bulb B323B (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs including B606 and B323. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. 60mm total bulb length, LED section 12mm x 25mm, P36S base with 22mm diameter cap and 36mm diameter plate

Unavailable at the moment please see P36SLED-S43TR High quality 8 x Cree 2525 (with heatsink) LED solution for lower wattage British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than transverse pattern P36S LED lamps and brighter than 12v incandescent bulb B185 (48W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6, 12 and 24V bulbs including B185 and B162. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate.

Warm white, high-quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, comparable in brightness to 12v incandescent bulb B323B (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs including B606 and B323. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 61mm total bulb length with 12 x 25mm LED section. 22mm diameter cap with 36mm plate.

High quality 8 x Cree 2525 (with heatsink) LED option for lower wattage British Pre-focus early head and spot lamp applications with the P36S base. Flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than transverse pattern P36S LED lamps and brighter than 12v incandescent bulb B185 (48W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6, 12 and 24V bulbs including B185 and B162. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 62mm total bulb length, 12 x 25mm LED section, 22mm diameter single contact cap with 36mm diameter pre-focus plate.

6 VOLT POSITIVE EARTH APPLICATION. High-quality 16 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Horizontal LED arrangement equivalent to a transverse filament. 1200 Lumen beam with a soft beam pattern. In testing, comparable to 6V incandescent bulb B108 (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6V bulbs including B108. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm diameter cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to Transverse filament. 1200 Lumen warm white beam with a soft beam pattern. Brighter than 12V incandescent bulb B57 (36W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs from 24 to 36W including B57 and B796. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA15SLED-S30TR-6P and BA15SLED-S30TR-6N for 6V positive and negative earth applications and BA15SLED-S43TR for a 6000k bright white colour temperature. 65mm total bulb height, 12 x 25mm LED section, 15mm diameter cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. Horizontal LED arrangement equivalent to Transverse filament. 1200 Lumen bright white beam with a soft beam pattern. Brighter than 12V incandescent bulb B23B (45W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of brighter 12 and 24V head and spot lamp bulbs including B23B and B795. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. See part number BA15SLED-S30TR for a 3000k warmer white colour temperature. 65mm total bulb height, 12 x 25mm LED section, 15mm diameter cap.

High quality 8 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. 6 VOLT POSITIVE EARTH APPLICATION. Vertical LED arrangement equivalent to axial filament. 1200 Lumen beam with a soft beam pattern. In testing, brighter than 6v incandescent bulb B108 (36W). Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 6 bulbs including B106. Made from aviation grade aluminium.These bulbs don't have an integral lens so can be used in tripod type lamps.

Warm white High quality 8 x Cree 2525 (with heatsink) LED upgrade for SCC BA15S head and spot lamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. Vertical LED arrangement is equivalent to the axial filament. 1200 Lumen warm white beam with a soft beam pattern. Brighter than 12V incandescent bulb B2A (36W) in testing. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs from 24 to 36W including B1 and B2B. Made from aviation-grade aluminium. These bulbs don't have an integral lens so they can be used in tripod-type lamps. Please see part numbers BA15SLED-S30AX-6P and BA15SLED-S30AX-6N for 6V positive and negative earth applications. See BA15SLED-S43AX for a brighter white alternative upgrade option for higher-wattage BA15S single axial filament bulbs.

15 x 42mm Festoon bulb - equivalent fitting to B1240B and good upgrade option for that bulb proving much brighter in testing. 180 degree light from 6 x SMD 5730 LEDs. These LEDS are brighter than 5050 LEDs and hence the bulb features a finned aluminium heat sink on the rear. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12.5mm wide LED section.

11 x 42mm 6 Volt Festoon bulb - equivalent fitting to B618F and good LED replacement option for that bulb with comparable brightness in testing. Bright 360 degree light from 24 x 3014 SMD LEDs. Tubular glass cover for LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. For a brighter LED upgrade - brighter than B818LEDW-B and B618F - please see part number B818LEDW-A

15 x 39mm 12V Festoon bulb - equivalent fitting to B239B, though much brighter in testing than 21W B273B. 180 degree light from 6 x SMD 5730 LEDs. These LEDS are brighter than 5050 LEDs and hence the bulb features a finned aluminium heat sink on the rear. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12.5mm body width. For less bright 39mm LED alternatives please see B273LEDW-B and B273LEDW-C

15 x 42mm 12V (& 24V) Festoon bulb - equivalent fitting to B270B though brighter in testing than 21W B273B. 180 degree light from 12 x 4014 LEDs. Input voltage 10 to 30V. Finned aluminium heat sink on rear. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 13mm wide LED section. For a less bright LED alternative please see B270LEDW-A

9 x 39mm 12V Festoon bulb - equivalent fitting to B239B though brighter than 21W B273B. 180 degree light from 6 x 4014 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Tubular glass cover over LEDs. For other bright LED options with a 39mm fitting please see B273LEDW-B and B273LEDW-E. 

9 x 39mm 12V (& 24V) Festoon bulb - equivalent fitting to B239B but brighter than 21W B273B. 180 degree light from 6 x 4014 LEDs. With tubular glass cover. Input voltage 10 to 30V. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 8.5mm LED section diameter. For other bright LED options with a 39mm fitting please see B273LEDW-C and B273LEDW-E. 

8 x 36mm 12V Festoon bulb - equivalent fitting to B257B though brightner in testing than 21W B273B. 180 degree light from 6 x 4014 LEDs. Tubular glass cover for LED section. Compatible with either negative or positive earth systems. Accepts 10 to 30V input voltage. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

15 x 42mm 12VFestoon bulb - equivalent fitting to B270B and B273B with brightness comparable to 21W. Bright 360 degree light from 24 x 3014 SMD LEDs. Tubular glass cover for LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 10mm LED section diameter. For a much brighter 42mm LED festoon option, please see part number B273LEDW-D

11 x 36mm 12V Festoon bulb - equivalent fitting to B257B and a great LED upgrade for that incandescent bulb, proving brighter in testing. 360 degree/all round bright light from 12 x SMD 5050 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 11mm LED section diameter, no cover.

11x36mm 12V Festoon bulb - equivalent fitting to B256. 180 degree light from 4 x SMD 5050 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

11 x 36mm 6 Volt Festoon bulb - equivalent fitting to B255B and a good upgrade for that bulb. 360 degree/all round bright light from 12 x SMD 5050 LEDs.. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm LED section diameter.

8 x 36mm 6 Volt Festoon bulb - equivalent fitting to B255. 180 degree light from 6 x 5730 SMD LEDs. Compatible with either negative or positive earth systems. Input voltage 5 to 9V. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

11 x 36mm 6 Volt Festoon bulb - equivalent fitting to B255. 180 degree light from 4 x SMD 3014 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

11 x 39mm Festoon bulb - equivalent fitting to B253. 180 degree light from 6 x SMD 3014 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature.

11 x 39mm 6 Volt Festoon bulb - equivalent fitting to B253B and an upgrade for that 5W bulb, proving much brighter in testing. Very bright 360 degree light from 24 x 3014 SMD LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 10mm tubular glass cover. For a less bright LED upgrade - though still brighter than B253B - please see B253LEDW-A

11 x 39mm 6 Volt Festoon bulb - equivalent fitting to B253 and a good upgrade for that 5W bulb proving much brighter in testing. 360 degree/all round bright light from 12 x SMD 5050 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12mm diameter LED section, no cover. For an alternative LED upgrade please see B253LEDW-E

11 x 39mm 12V Festoon bulb - equivalent fitting to B239B. 180 degree bright white light from 6 x SMD 3014 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 10mm LED section diameter. Comparable to 5W B239B in testing. See also B239LEDW-A and B239LEDW-E for other 39mm festoon LED upgrades.

11 x 39mm 12V Festoon bulb - equivalent fitting to B239, B272. Bright 360 degree light from 24 x 3014 SMD LEDs. Tubular glass LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Much brighter than 5W B239B in testing, more comparable to 8W. See also B239LEDW-A for another 39mm Festoon LED upgrade.

Combined WARM WHITE and AMBER multi direction, sidelight and indicator bulb. Accepts 6V and 12V input voltages with BA15D base. 12 super bright LEDs with integral lens. Warm white light for sidelight function, changing to very bright AMBER for indication. This bulb should function normally with your existing flasher unit, in the unlikley event of LED 'Hyper flash' an electronic flasher relay will be required of the correct polarity for your vehicle (also pin configuration, to suit your current wiring arrangment). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature for sidelight, bright amber for indicator. Very flexible application. A great compact and bright solution for easily converting classic sidelights to sidelight/indicator functionality. 18mm maximum diameter, 47mm total bulb height. For a bright white version of this LED lamp please see CSILEDW. For Offset pin BAY15D base versions please see CSILEDWY and CSILEDWWY. 

BA15D fitting. Combined WHITE and AMBER multi-direction, sidelight and indicator bulb. Accepts 6V and 12V input voltages with BA15D base. 12 super bright LEDs with an integral lens. Bright white light for sidelight function, changing to very bright AMBER for indication. This bulb should function normally with your existing flasher unit, in the unlikely event of LED 'Hyper flash' an electronic flasher relay will be required of the correct polarity for your vehicle (also pin configuration, to suit your current wiring arrangement). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. 6000K bright, white colour temperature for sidelight, bright amber for the indicator. Very flexible application. A great compact and bright solution for easily converting classic sidelights to sidelight/indicator functionality. 18mm maximum diameter, 47mm total bulb height. For a warm white version of this LED lamp please see CSILEDWW. For Offset pin BAY15D base versions please see CSILEDWY and CSILEDWWY.  Base Pin Guide

High performance CSP 1860 LED upgrade for British Pre-focus headlamp bulbs with the P36D base. Integral heatsink. Accepts 5 to 9V input voltage - optimised for 6V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B306 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. Not suitable for Tripod lamps, use P36DLED-S30 for correct beam pattern for Tripod Lamps. This bulb is a great LED alternative to a number of 6V british Pre-focus bulbs with dipped beam filament shields including B306 and B312B. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P36DLED-P43 for a 12V, negative or positive earth version. Please see part numbers P36DLED-S30-6P and P36DLED-S30-6N for 6V British Pre-focus headlamp bulbs with twin transverse filaments without filament shields. And P36DLED-H30L and P36D0LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

Premium high power LED lens lamp upgrade for H4 headlamp bulbs with the P45T base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 4300K bright white colour temperature. This bulb is a great LED alternative to a Halogen P45T 6, 12 and 24V H4 bulbs, with brightness in testing comparable with halogen 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 81mm these are shorter than standard P45t H4 headlamp type bulbs at 92mm.

Premium high power LED lens lamp upgrade for Marchal type lamps with a double contact BA21D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - an equally bright yellow version is available with a colour temperature of 2500K - see part number BA21LED-H25YL. This bulb is a great LED upgrade alternative to B5912B and B5915B. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. The lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are gerat for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 71mm these are longer than standard BA21 Marchal type bulbs at 60mm.

Premium high power LED lens lamp upgrade for Marchal type bulbs with a double contact BA21D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 2500K yellow colour temperature - a white version is available with a warm classic colour temperature of 3000K - see part number BA21LED-H30L. This bulb is a great LED upgrade alternative to B5912BY and B5915BY. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. The lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 71mm these are longer than standard BA21 Marchal type bulbs at 60mm.

Bright white premium high power LED lens lamp upgrade for Bosch type lamps with a double contact BA20D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 4300K modern, bright white colour temperature - a version is available with a warmer, classic colour temperature of 3000K - see part number BA20LED-H30L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA20D bulbs from 25/25W to 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note that due to the lens on the LED, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 75mm these are slightly longer than standard BA20 Bosch type bulbs (at 71mm).

Warm white premium high power LED lens lamp upgrade for Bosch type lamps with a double contact BA20D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version with a brighter/whiter colour temperature of 4300K is also available - see part number BA20LED-H43L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA20D bulbs from 25/25W to 45/40. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 75mm these are slightly longer than standard BA20 Bosch type bulbs (at 71mm).

Warm white premium high power LED lens lamp upgrade for British Pre-Focus headlamps with a double contact P36D bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version is available with a brighter/whiter colour temperature of 4300K - see part number P36DLED-H43L. This bulb is a great LED upgrade alternative to bulb types B312B, B414B, B437, B370, B354, B358, B350, B306 and B359. In testing, this bulb was comparable to 6V incandescent bulb B312B and 12V incandescent bulb B301 (36/36W). These bulbs include a lens that is designed to focus their own beam and produce a super light output with bright main beam and well defined level dipped beam with the dip pattern set by the light unit lens. The integral lens makes reflector condition less important. Please note though, that due to the integral lens, this bulb cannot be used with tripod type lamps or those with an internal 'Biflex' style reflector, as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 67mm these are shorter than most sizes of incandescent BPF bulbs (at 80mm).

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36D base. 6 VOLT POSITIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B6721 type bulbs. In testing, brighter than incandescent bulbs rated at 24/30W, more comparable with 36/42W. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. Suitable beam pattern for Tripod headlamps. This bulb is a good LED upgrade alternative for unshielded twin filament 6V bulbs including B6721. It is not a suitable alternative to B306 and B312B as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43-6. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate.

Bright white Premium high power LED lens lamp upgrade for SBC BA15D type headlamp bulbs. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 4300K modern, bright white colour temperature - a version is available with a warmer, classic colour temperature of 3000K - see part number BA15LED-H30L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA15D bulbs from 24/24W to 45/35W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes lamp reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Bi-flex' style reflector, as they distrupt the carefully designed beam pattern. In testing these lamps were brighter than incandescent bulb B170B (6V) 36/36W and B1248B (12V) 45/35W. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are slightly longer than standard BA15D headlamp 38mm diameter globe type bulbs (at 60mm total height).

Classic warm white Premium high power LED lens lamp upgrade for SBC BA15D type headlamp bulbs. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). This version is 3000K classic warm white colour temperature - a version with a brighter/whiter colour temperature of 4300K is also available - see part number BA15LED-H43L. This bulb is a great LED upgrade alternative to a large number of 6, 12 and 24V incandescent and halogen BA15D bulbs from 24/24W to 45/35W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This integral lens makes lamp reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps or those with an internal 'Bi-flex' style reflector, as they disrupt the carefully designed beam pattern. In testing these lamps were brighter than incandescent bulbs B170B (6V) and B171B (12V) 36/36W. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered vintage electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are slightly longer than standard BA15D headlamp 38mm diameter globe type bulbs (at 60mm total height).

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. 6 VOLT NEGATIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to 6V bulbs B168 (24/24W) and B170B (36/36W). In testing, these lamps were significantly brighter than incandescent bulb B170B 36/36W, with over 50% more light output. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod or Bi-flex type lamps. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. If your lamps doesn't have a biflex bar or tripod arrangement, please consider part number BA15DLED-H30L and BA15DLED-H43L, which are also great with tired reflectors, as the integral lens on these LEDs focusses its own beam.

High-quality 16 x Cree 2525 (with heatsink) WARM WHITE LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern.  One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to a number of 12 and 24V bulbs from 24/24 to 45/35W including B171B, B1248B and B194. In testing, it proved significantly brighter than B1248B at 45/35W. Made from aviation-grade aluminium. These bulbs don't have an integral lens so can be used in tripod-type lamps. Please see part number BA15DLED-H43 for a 4300k, bright white colour. Also part numbers BA15DLED-H30-6P and BA15DLED-H30-6N for 6V positive and negative earth applications respectively.  Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. 6 VOLT POSITIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to 6V bulbs B168 (24/24W) and B170B (36/36W). In testing, these lamps were significantly brighter than incandescent bulb B170B 36/36W, with over 50% more light output. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod or Bi-flex type lamps. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. If your lamps doesn't have a biflex bar or tripod arrangement, please consider part number BA15DLED-H30L and BA15DLED-H43L, which are also great with tired reflectors, as the integral lens on these LEDs focusses its own beam.

High-quality LED upgrade (with built-in mini cooling fan) for H4 lamps with the P43T base. Single H4 bulb.  Flexible application - accepts 9 to 32V input voltage. Two high-power LEDs on each side provide high and low beam function - specified at over 1800 Lumen high beam and 1800 Lumen low beam, giving over 3600 Lumen combined. In testing, 90% brighter (LUX measurement at a fixed distance) on low beam and over 100% brighter on high beam than B472 (60/55W) with a modern, bright white look. Low current draw - less than 50% of 60/55w halogen bulbs, so great for lower-powered electrical systems. 6000K clean bright, white colour temperature. The latest plug-and-play upgrade for H4 bulbs - modern, powerful, high-performance lighting with reduced current consumption; Estimated lifespan significantly higher than conventional bulbs. The filament layout, including low beam filament shield, produces a good high and low beam pattern - with a clean cut-off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a very powerful LED upgrade alternative for a number of halogen bulbs including B472. These bulbs don't have an integral lens so can be used in tripod-type lamps. Total bulb height including wiring/spade connections 80mm, 19 x 42mm LED section. Due to the high-performance nature of the bulb, cooling cannot be achieved with a solid, no moving parts heatsink, hence the incorporation of a cooling fan.

High performance CSP 1860 LED upgrade for SBC headlamp bulbs with the BA15D base. Integral aluminium heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative OR positive earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B171 (36/36W). The LED layout and inclusion of a low beam filament shield on this lamp means makes this a dipping bulb in the syle of some Marchal, Bosch and later British Pre-focus bulbs. Some early BA15D bulb designs did have special dipping filament arrangements - either a transverse 'V' filament next to an axial 'V' filament, or a hemispherical shield under the dipped beam filament - though these bulbs have not been available for many years. In testing, this LED lamp produced a great high and low beam pattern with Lucas 'U' flute style lenses in particular and is the recommended BA15D 'no integral lens' LED lamp upgrade for early headlamps fitted with these lenses, with or without a Bi-flex bar. For 'Difusa' style lenses, we recommend the BA15DLED-H43 style LED, which imitates a twin (unshielded) filament bulb, or BA15DLED-H43L with the integral lens that produces great light output - regardless of reflector condition - and an excellent, defined dipping pattern Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12 and 24V BA15D bulbs including B171B (12V 36/36W), B1248B (12V 45/35W) and B194 (24V 36/26W - not currently available). Body made from aviation grade aluminium. As noted above, these bulbs don't have an integral lens, so can be used in tripod type lamps. 60mm total bulb height. 25mm max heat sink diameter, 15mm cap diameter.

PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights fitted with FULL RED lenses to bright LED operation. On board electronics make this product suitable for 6V &12V vehicles, either Positive or Negative earth. This is a new product specially designed to fit the Lucas ST51 lamp and modern reproductions to the original pattern such as Vintage Supplies'/sVc's '249 and 428' part number lamps. The product features a main, D shaped RED light board that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. The board is fitted with one BAY15D bulb base connector (15mm diameter, double contact cap with vertically offset pins) on 15cm connecting wires. One contact of the double contact holder illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second contact illuminates the Stop light (second brightness RED). Use of a bulb base style connector allows easy return of the lamp to its original condition if required. These boards have a very low power requirement and provide great all over lens lighting from 36 RED LEDS, with the fast response time/illumination under braking characteristic of LEDs - as well as good distinction between STOP and TAIL brightnesses. This is a 'plug and play' product that requires no other attachment other than plugging in the bulb connector, locating the LED board between the lens and the lens retaining spring clip and reassembly of the lamp. Two 1.5mm thick rubber lens seals are provided in the kit, in case they are needed. Conversion kit for a PAIR of lamps.

A PAIR of LED light boards for conversion of Lucas ST38 'Pork Pie' type lamps fitted with all RED lenses to bright LED operation. On board electronics make this product suitable for 6V & 12V vehicles and Positive & Negative earth systems. This is a new product specially designed to fit the Lucas ST38 lamp and modern reproductions to the original pattern such as '776' part numbered products. Each board features a main, circular RED light panel with a centre slot that fits over/locates on the vertical partition of the triple bulb holder bolted into the ST38 body. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination - though the assembly is suitable for lamps with or without a number plate illumination window. The board is fitted with two BA15S bulb base connectors on 9cm connecting wires. One connection illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The other connection illuminates the Stop light (second brightness RED). Use of bulb base style connectors allows easy return of the lamp to its original condition if required. These boards have a very low power requirement and provide great all over lens lighting from 36 RED LEDS, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL brightnesses. This is a 'plug and play' product that requires no attachment other than plugging in the bulb connectors, locating the slot in the LED board over the bulb holder partition and reassembly of the lamp. Two 3mm thick foam lens seals are provided in the kit, incase they are needed for cushioning. Conversion kit for a PAIR of lamps.

High performance CSP 1860 LED upgrade for Bosch and Lucas headlamp bulbs with the BA20D base. Integral heatsink. Accepts 5 to 9V input voltage - optimised for 6V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than BT527 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 6V bulbs including BT519, B392B, BT520, B393B, B393H (Halogen), BT521 and BT527. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number BA20DLED-P43 for a 12V, negative earth version. Please see part numbers BA20LED-H30L and BA20LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

PAIR of all in one LED light boards and split Red/Amber lenses for conversion of Lucas ST51 SPLIT lens 'D Lamp' type Stop & Tail lamps (with or without number plate illumination) fitted with all RED lenses, to Stop, Tail, INDICATOR & number plate illumination operation. On board electronics make this product suitable for 6V & 12V vehicles, either Positive or Negative earth. This is a new product specially designed to fit the Lucas ST51 lamp and modern reproductions to the original pattern, such as Vinate Supplies'/sVc's '249A' and '428A' part numbered products. The product features a main, D shaped light board with two sections of LEDs - one RED and one AMBER - that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. The board is fitted with one bulb base BA15D connector (please note - equal NOT offset pin) on 15cm connecting wires and one BA15S bulb base connector on 10cm connecting wires. One terminal of the BA15D base illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second terminal illuminates the Stop light (second brightness RED). The BA15S connection iluminates the AMBER indication/turn signal LEDs. Use of bulb base style connectors allows easy return of the lamp to its original condition if required. These boards have a very low power requirement and provide great all over lens lighting from 27 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL brightnesses. This is a 'plug and play' product that requires no attachment other than plugging in the two bulb connectors and locating the LED board between the lens and the lens retaining spring clip, then reassembly of the lamps with the new Red/Amber lenses instead of the all Red split lens. Two 1.5mm thick rubber lens seals are provided in the kit, one for each lens if required. Conversion kit for a PAIR of lamps.

A PAIR of all in one LED light boards and split Red/Amber lenses for conversion of Lucas ST38 'Pork Pie' type Stop & Tail lamps (with or without number plate illumination) with all RED lenses to Stop, Tail, INDICATOR & Number Plate illumination operation. On board electronics make this product suitable for 6V & 12V vehicles, and Positive & Negative earth systems. This is a new product specially designed to fit the Lucas ST38 lamp and modern reproductions to the original pattern, such as '776' part numbered products. The product features a main, circular RED and AMBER light board with a centre slot that fits over/locates on the vertical partition of the triple bulb holder bolted into the ST38 body. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination - though the assembly can be used in lamps with or without a number plate illumination window. The board is fitted with three BA15S bulb base connectors on 10cm connecting wires. One connection illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second connection illuminates the Stop light (second brightness RED). The third connection illuminates the AMBER indication/turn signal LEDs. Use of bulb base style connectors allows easy return of the lamp to its original condition if required. These boards have a very low power requirement and provide great all over lens lighting from 30 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL brightnesses. This is a 'plug and play' product that requires no other attachment other than plugging in the three bulb connectors, locating the slot in the LED board over the original bulb holder partition and reassembly of the lamps with the new Red/Amber lenses instead of the all Red lenses. Four 3mm thick foam lens seals are provided in the kit, one for either side of each lens if required. Conversion kit for a PAIR of lamps.

PAIR of all in one LED light boards to upgrade CA1249 lamps - Lucas type ST38 'Pork Pie' Stop & Tail lamps converted to include indicator functionality with split WEDGE T10 bulb holders and split RED/AMBER lenses. On board electronics make this product suitable for 6V & 12V vehicles and Positive & Negative earth systems. This is a new product specially designed to fit Lucas ST38 lamps (and modern reproductions to the original pattern) that have already been converted to include indicator functionality - Vintage Supplies' or sVc's 'CA1249' part numbered product range. The product features a main, circular RED and AMBER light board with a centre slot that fits over/locates on the vertical partition of the triple WEDGE T10 bulb holder retro bolted into the ST38 lamp body. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination. The board is fitted with three WEDGE T10 bulb base connectors on 10cm connecting wires. One connection illuminates the Tail light (first brightness RED) and the Number Plate light (WHITE). The second connection illuminates the Stop light (second brightness RED). The third connection iluminates the AMBER indication/turn signal LEDs. Use of T10 bulb base style connectors allows easy return of the lamp to its original condition and capless bulb operation if required. These boards have a very low power requirement and provide great all over lens lighting from 30 RED LEDs and 24 AMBER LEDs, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL red light brightnesses. This is a 'plug and play' product that requires no attachment other than plugging in the three T10 bulb connectors, locating the slot in the LED board over the partition and reassembly of the lamp. Two 3mm thick foam lens seals are provided in the kit, incase they are needed for cushioning. Conversion kit for a PAIR of lamps.

PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles and Positive & Negative earth systems. This is a new product specially designed to fit the Lucas ST51 split lens lamp and modern reproductions to the original pattern such as Vintage Supllies'/sVc's '249A and 428A' part number products. The panel features a main, D shaped RED light board with two sections of LEDs, that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. Two versions of this board are available to deal with different designs of 'D lamp': Two BA15S bulb holder connectors (15mm diameter, single contact cap with equal pins) on 15cm connecting wires. One connector illuminates the Tail light (first brightness RED on both section of LEDs) plus the Number Plate light (WHITE). The second connector illuminates the Stop light (second brightness RED on both sections of LED) One BA15S single contact holder and one BA15D double contact equal pin holder - The BA15S connector illuminates the Tail light (first brightness RED on both sections of LEDs) plus the Number Plate light (WHITE). Either terminal on the BA15D connector illuminates the Stop light (second brightness RED on both sections of LED) Please check the bulb holders in your ST51 D Lamp and see whether it has two single contact bulb holders or one single and one double (BA15D) holder - then select either the BA15S/BA15S or BA15S/BA15D panel These boards have a very low power requirement and provide great all over lens lighting from 51 RED LEDS, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL red light brightnesses. This is a 'plug and play' product that requires no other attachment other than plugging in the bulb connectors and locating the LED board between the lens and the lens retaining spring clip and reassembly of the lamp. Two 1.5mm thick rubber lens seals are provided in the kit, in case they are needed. Conversion kit for a PAIR of lamps. --

PAIR of LED light boards for conversion of Lucas ST51 'D Lamp' type lights, fitted with SPLIT RED lenses, to bright LED operation. On board electronics make this suitable for 6V & 12V vehicles and Positive & Negative earth systems. This is a new product specially designed to fit the Lucas ST51 split lens lamp and modern reproductions to the original pattern such as Vintage Supllies'/sVc's '249A and 428A' part number products. The panel features a main, D shaped RED light board with two sections of LEDs, that locates between the original lens and the lens retaining wire. An additional WHITE LED light board is attached perpendicular to the main board to provide number plate illumination, though the assembly is suitable for D lamps with or without a number plate illumination window. Two versions of this board are available to deal with different designs of 'D lamp': Two BA15S bulb holder connectors (15mm diameter, single contact cap with equal pins) on 15cm connecting wires. One connector illuminates the Tail light (first brightness RED on both section of LEDs) plus the Number Plate light (WHITE). The second connector illuminates the Stop light (second brightness RED on both sections of LED) One BA15S single contact holder and one BA15D double contact equal pin holder - The BA15S connector illuminates the Tail light (first brightness RED on both sections of LEDs) plus the Number Plate light (WHITE). Either terminal on the BA15D connector illuminates the Stop light (second brightness RED on both sections of LED) Please check the bulb holders in your ST51 D Lamp and see whether it has two single contact bulb holders or one single and one double (BA15D) holder - then select either the BA15S/BA15S or BA15S/BA15D panel These boards have a very low power requirement and provide great all over lens lighting from 51 RED LEDS, with the fast response time/illumination under braking characteristic of LEDs - plus good distinction between STOP and TAIL red light brightnesses. This is a 'plug and play' product that requires no other attachment other than plugging in the bulb connectors and locating the LED board between the lens and the lens retaining spring clip and reassembly of the lamp. Two 1.5mm thick rubber lens seals are provided in the kit, in case they are needed. Conversion kit for a PAIR of lamps. --

High performance CSP 1860 LED upgrade for H4 P45t type bulbs with the Continental, 46mm diameter turreted base with three spade connections. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than B904 (45/40W) and comparable with BHB12 (60/55W). The LED layout is designed to match the original H4 filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B904, BHB12 and BHB24. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number P45TLED-H43L for a classic white LED upgrade lamp with an integral lens. 82mm total bulb height.

High quality CSP 1860 LED upgrade for Marchal type bulbs with a double contact BA21D bulb base. With integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B5915 (45/40W) with a classic warm white light. The LED layout is designed to match the original Marchal filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic white colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B5914B and B5915B. Made from aviation grade aluminium. These bulbs don't have an integral lens. Please see part number BA21DLED-P30 for a yellow light version of this lamp and part numbers BA21DLED-H25YL and BA21DLED-H30L for LED upgrade lamps with integral lenses. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High quality CSP 1860 LED upgrade for Marchal type bulbs with a double contact BA21D bulb base. With integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, brighter (LUX measurement at fixed distance) than B5915 (45/40W) but with a yellow light. The LED layout is designed to match the original Marchal filament layout including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 3000K yellow colour temperature. This bulb is a great LED alternative to a number of 12V bulbs including B5915BY. Made from aviation grade aluminium. These bulbs don't have an integral lens. Please see part number BA21DLED-P43 for a classic white versions of this lamp and part numbers BA21DLED-H25YL and BA21DLED-H30L for LED upgrade lamps with integral lenses. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap.

High performance CSP 1860 LED upgrade for Bosch and Lucas headlamp bulbs with the BA20D base. Integral heatsink. Accepts 11 to 60V input voltage - optimised for 12V, negative earth systems. High and low beam - 1600 Lumen high beam, 1600 Lumen low beam - with a soft beam pattern. In testing, much brighter (LUX measurement at fixed distance) than B396 (45/40W). The LED layout is designed to match the original filament layout, including low beam filament shield. The lamp produces a good high and low beam pattern - with the dip pattern governed by the lamp lens. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems. 4300K classic, warm white colour temperature. This bulb is a great LED alternative to a number of 12 and 24V bulbs including BT529, B394, BT523, B395B, B395H (Halogen), BT528, B396B, BT1524, B399 and BHB24. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part number BA20DLED-P43-6N for a 6V, negative earth version. Please see part numbers BA20LED-H30L and BA20LED-H43L for warm and bright white LED upgrade lamps with integral lenses. 77mm total bulb height. 20mm diameter cap.

High-quality LED upgrade (with built-in mini cooling fan) for H4 lamps with the P43T base. Set of two H4 bulbs.  Flexible application - accepts 9 to 32V input voltage so suitable for 12 or 24V vehicles. Two high-power LEDs on each side provide high and low beam function - specified at over 1800 Lumen high beam and 1800 Lumen low beam, giving over 3600 Lumen combined. In testing, 90% brighter (LUX measurement at a fixed distance) on low beam and over 100% brighter on high beam than B472 (60/55W) with a modern, bright white look. Low current draw - less than 50% of 60/55w halogen bulbs, so great for lower-powered electrical systems. 6000K clean bright, white colour temperature. The latest plug-and-play upgrade for H4 bulbs - modern, powerful, high-performance lighting with reduced current consumption; Estimated lifespan significantly higher than conventional bulbs. The filament layout, including low beam filament shield, produces a good high and low beam pattern - with a clean cut-off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a very powerful LED upgrade alternative for a number of halogen bulbs including B472 and B475. These bulbs don't have an integral lens so can be used in tripod-type lamps. Total bulb height including wiring/spade connections 80mm, 19 x 42mm LED section. Due to the high-performance nature of the bulb, cooling cannot be achieved with a solid, no moving parts heatsink, hence the incorporation of a cooling fan.

Kit of two WEDGE T10 base LED bulbs for Lucas type 1130 side lamps that have been converted to SIDE LIGHT & INDICATOR operation with the 424A T10 bulb holder kit (or purchased as 297IND, 297A-IND or 297B-IND complete lamps, with the same 3 x WEDGE T10 bulb holder). Also new sidelamp 1142IND. One very bright AMBER B921ALEDW-A LED bulb and one WHITE Osram LED B117LEDWW-A. Both these high quality bulbs accept 6 and 12 input voltages, so this one kit is suitable for both 6 or 12V vehicles. A simple conversion of these popular lamps to LED operation, as an alternative to LED combination bulbs such as CSILEDWWY - with both options providing good 6V solutions in the absence of a 6V equivalent to 12V incandescent bulb B921A (T10/T15 base 21W bulb). Kit converts one lamp, please buy 2 kits to convert a pair of bulb holders/lamps.

Kit of three WEDGE T10 base bulbs for Lucas type ST38 'Pork Pie' lamps that have been converted to STOP,TAIL & INDICATOR with the ST38CONV kit (or purchased as CA1249 lamps, with the same 3 x WEDGE T10 bulb holder) Two very bright B921LEDW-A bulbs (Indicator / Brake Light) and one Osram B117LEDWW-A (Side Light). Both these high quality bulbs accept 6 and 12 input voltages, so this one kit is suitable for 6 or 12V vehicles. A simple conversion of these popular lamps to LED operation, as an alternative to LED light panel CA1249LP-RAW - with both options providing good 6V solutions in the absence of a 6V equivalent to 12V incandescent bulb B921 (T10/T15 base 21W bulb). Kit converts one lamp, please buy 2 kits to convert a pair of rear lamps.

Compact, high power Amber LED that accepts 6 to 24V input voltage. WEDGE T15 W16W type base - so fits the same holders as WEDGE T10 bulbs, just a larger bulb. 360 degree super bright AMBER light. Much brighter in testing than amber T15 incandescent bulb B921A (21W). Compatible with either negative or positive earth systems suitable for 6, 12 or 24V operation. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Extremely compact 32mm total bulb length, 14mm head diameter. This bulb was specified for WEDGE T10/T15 base applications where space is constrained e.g. in Lucas type 1130 lamps fitted with the '424A' conversion pictured. A great LED bulb (along with high quality Osram LED bulb B117LEDWW-A) to upgrade 1130 lamps already converted to side light and indicator function. For correct indicator function an electronic flasher relay may be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. For a bright WHITE version of this great LED lamp, please see part number B921LEDW-A

Compact, high power White LED that accepts 6 to 24V input voltage. WEDGE T15 W16W type base - so fits the same holders as WEDGE T10 bulbs, just a larger bulb. 360 degree super bright WHITE light. Much brighter in testing than WHITE T15 incandescent bulb B921 (21W). Compatible with either negative or positive earth systems suitable for 6, 12 or 24V operation. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright WHITE colour temperature. Ideal for warning applicatuins e.g reversing light, as well as indicator Extremely compact 32mm total bulb length, 14mm head diameter. This bulb was specified for WEDGE T10/T15 base applications where space is constrained e.g. in Lucas type ST38 lamps fitted with the 'ST38CONV' conversion pictured. A great LED bulb (along with high quality Osram LED bulb B117LEDWW-A) to upgrade ST38/CA1249 lamps already converted to stop and indicator function. For correct indicator function an electronic flasher relay may be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. For a bright AMBER version of this great LED lamp, please see part number B921ALED-A

6V Positive Earth. 12 Amber LED, 7 Red LED tail light with 4 white LED number plate light. For lamp part number 211RA-S. two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH2

8 x 5050 SMD LED BA15S 12 Volt multi-directional RED lamp. Red LED upgrade bulb. In testing much brighter than B207BR, BA15S base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. RED colour. Applications include rear lights. 37mm total bulb length, 20mm head diameter, no cover.

30 x 4014 SMD LED BA15D 6 Volt multi-directional 600 Lumen bright RED dual brightness LED lamp. Combined Stop & Tail (Brake & Rear) functionality. RED LED option for B383 type 6V double filament type bulbs with BA15D double contact base. RED colour is good for enhancing brightness behind red lenses. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright RED colour temperature.

30 x 4014 SMD LED BA15D 6 & 12 Volt multi-directional 600 Lumen bright RED lamp. Combined dual brightness Stop & Tail (Brake & Rear) functionality. RED LED option for B381B type double filament bulbs with BA15D double contact base. Dual polarity. RED LEDs good for enhancing colour behind red lenses. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright RED colour temperature. For White and warm white LED versions of B381B please see B381LEDW and B381LEDWW

30 x 4014 SMD LED BA15S 6 Volt multi-directional bright white lamp. LED upgrade and replacement for B317 single filament type bulb. BA15S base. In testing, directly comparable in light output to 6V incandescent bulb B317/B317B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Good for Reverse applications. B307LEDWW or B317LEDA are better for indicator applications. Maximum diameter 18mm, total bulb height 43mm.

8 x 5050 SMD LED BA15D 12 Volt multi-directional bright white lamp. LED upgrade and direct replacement for B245D and B308B. BA15D base. In testing, brighter than c15W incandescent bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include sidelights and repeaters, warning lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover. For a warm white alternative see B308LEDWW.

30 x 4014 SMD LED BA15S 6 Volt multi-directional, 600 lumen bright RED lamp. LED upgrade and replacement for B317 type single filament bulb. BA15S base. Brighter than conventional 21W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright RED colour temperature. This is NOT a combined stop & tail function bulb. Maximum diameter 18mm, total bulb height 43mm.

30 x 4014 SMD LED BA15D 6 Volt multi-directional 600 Lumen bright white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED bulb option for B383B double filament type bulb with BA15D double contact base. Comparable in brightness to conventional 5/21W bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warmer white colour temperature, please see part number B383LEDWW

30 x 4014 SMD LED BA15D 12 Volt multi-directional bright white lamp. LED upgrade and replacement for B335 single filament 21W bulb with BA15D souble contact base. In testing, comparable in brightness to conventional 21W bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warmer white light please see B335LEDWW.

30 x 4014 SMD LED BA15S 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B382B single filament type bulb. BA15S base. Brighter in testing than conventional incandescent 21W bulb B382B. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature for classic look. Indicator (warm white is usually the best LED colour option for behind an amber lens) or Reverse applications. If used as an indicator, an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Maximum diameter 18mm, total bulb height 43mm. For a bright white version of this lamp please see part number B382LEDW and for an amber indicator version B382LEDA

30 x 4014 SMD LED BA15S 6 Volt multi-directional warm white lamp. LED upgrade and replacement for B307 single filament type bulb. BA15S base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. In testing, comparable in light output to6V incandescent bulb B307B (15W). 3000K warm, white colour temperature. Indicator (best LED colour option of this bulb for behind an amber lens) or Reverse applications. If used as an indicator, an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Maximum diameter 18mm, total bulb height 43mm.

30 x 4014 SMD LED BA15D 12 Volt multi-directional warm white lamp. LED upgrade and replacement for B335 single filament 21W bulb with BA15D double contact base. In testing, comparable in brightness to a conventional 21W bulb. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Indicator (warm white often the best LED colour option for behind an amber lens) or Reverse applications. If used as an indicator, an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Maximum diameter 18mm, total bulb height 43mm. For a brighter white light please see B335LEDW

30 x 4014 SMD LED BA15D 6 Volt multi-directional 600 Lumen warm white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED upgrade and replacement for B383B or B3214A double filament type bulbs with BA15D double contact base. In testing comparable in brightness to the 5/18W B3214A, for a brighter LED option please see part number B383LEDW bright white LED. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Maximum diameter 18mm, total bulb height 43mm.

30 x 4014 SMD LED BA15D 6 Volt multi-directional warm white lamp. LED upgrade and replacement for B319S single filament type bulb with BA15D double contact base. Comparable in brightness to B319S incandescent 18W bulbs with the benefit of LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Indicator (best LED colour option for behind an amber lens) or Reverse applications. If used as an indicator, an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Maximum diameter 18mm, total bulb height 43mm. For a bright whire version of the LED bulb please see part number B319LEDW.

12V Negative Earth. LED stop & tail conversion for 211/'Duolamp' type lamps. When brakes are applied, the "STOP" script illuminates in amber with a brighter, safer light than from standard incandescent bulbs. New technology for classic and vintage cars, motorcycles, and other custom applications that maintains an original appearance. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Add plug in module part number 211RALED-PLATE for number plate light functionality. This is the LED cluster only - not a complete lamp. An alternative upgrade with 'STOP' script for 211RR, or 211RR-S if 211RALED-PLATE is added.

12V Negative Earth. All Red LED stop & tail conversion for 211/'Duolamp' type lamps. When brakes are applied, the stop LED cluster illuminates with a brighter, safer light than from standard incandescent bulbs. New technology for classic and vintage cars, motorcycles, and other custom applications that maintains an original appearance. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Add plug in module part number 211RALED-PLATE for number plate light functionality. This is the LED cluster only - not a complete lamp. Upgrades part number 211RR or 211RR-S if 211RALED-PLATE is added.

12 volt single contact BA15s 48 watt single axial filament. Dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use head or spot lamp. For a brighter halogen option please see B795. For LED options, please see BA15SLED-S43AX and BA15SLED-S43TR For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6V bulb rated at 35W. BA20S single contact base. Clear glass 35mm diameter. Single transverse filament.

6V Positive Earth. 12 Amber LED, 7 Red LED stop/tail light with 4 white LED number plate light. To upgrade lamp part number 211RA-S. One single contact equal pin BA15S (1156/SCC) bulb base connector (indicator function) and one offset pin BAY15D (1157) connector (stop, tail/number plate functions). High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH3, 6V positive earth version, to eliminate the possibility of too rapid LED indicator flash. You will need to upgrade the bottom bulb holder socket on your lamp to a BAY15D socket with part number 211-CONV. This exclusive product provides STOP, TAIL, INDICATOR and NUMBER PLATE ILLUMINATION functionality all in one Duolamp cluster!

12V Negative Earth. 12 Amber LED, 7 Red LED stop/tail light with 4 white LED number plate light. For upgrade of lamp part number 211RA-S. One single contact equal pin BA15S (1156/SCC) bulb base connector (indicator function) and one offset pin BAY15D (1157) connector (stop, tail/number plate light functions). High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH3, 12V negative earth version, to eliminate the possibility of too rapid LED indicator flash. You will need to upgrade the bottom bulb holder socket on your lamp to a BAY15D socket with part number 211-CONV. This exclusive product provides STOP, TAIL, INDICATOR and NUMBER PLATE ILLUMINATION functionality all in one Duolamp cluster!

12V Negative Earth. 12 Amber LED, 7 Red LED tail light with 4 white LED number plate light. For upgrade of lamp part number 211RA-S. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH3, 12v negative earth version.

6V Positive Earth. 12 Amber LED, 7 Red LED tail light. For upgrade of lamp part number 211RA. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH3, 6V positive earth version. Add plug in number plate light module 211RALED-PLATE to upgrade 211RA-S

12V Negative Earth. 12 Amber LED, 7 Red LED tail light. For upgrade of lamp part number 211RA. Two single contact equal pin BA15 bulb base connectors. High quality polycarbonate lens. Epoxy coated, fully sealed electronics. Recommend to upgrade flasher unit to item LEDFLASH3, 12v negative earth version. Add plug in number plate module 211RALED-PLATE to upgrade 211RA-S.

12V bulb rated at 45W, Bosch type BA20S single contact base. Single transverse filament.

12V bulb rated at 35W, Bosch type BA20S Single contact base. Single transverse filament

6 volt double contact BAY15d offset pin 21/5 watt. dimensions 24mm wide x 48mm tall with 15mm diameter cap, use side/stop/flash. Please see part number B3214-off for a small globe (19mm diameter) version. For LED options please see B384LEDW, B384LEDWW and also red dual brightness B384LEDR as well as combined number plate illumination, tail and stop LED lamp CSTLEDWWR-6NY (Neg earth) or CSTLEDWWR-6PY (Pos Earth) For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. 

6 volt double contact BA15d equal pin 21/5 watt. dimensions 24mm wide x 48mm tall with 15mm dia cap, use side/stop/flasher. For small (19mm) globe version please see part number B3214-equal. For LED options please see part numbers B383LEDW and B383LEDWW. Also dual brightness red LED lamp, B383LEDR. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA15s 21 watt. 19mm diameter small globe size - dimensions 18.5mm wide x 32mm tall with 15mm diameter cap. For an LED version of this bulb please see B382LEDW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Pre-focus type 12 volt single contact P36s, 48 watt single filament. Dimensions 27mm wide x 58mm tall with 22mm diameter cap mounted on a 35mm flange, use fog lamp.  For axial filament version of this bulb (better for spot lamps) please see B185. For Halogen upgrade please see B185BH. For LED options please see P36SLED-S30TR and P36SLED-S43TR For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Pre-focus type 6 volt double contact P36D, 30/24 watt double filament bulb. dimensions 27mm wide x 58mm tall with 22mm diameter cap mounted on a 36mm flange. For a brighter incandescent bulb option with a dipped beam filament shiled please see part number B306. For LED options please see options part numbers options P36DLED-P43-6,  P36DLED-H30L and P36DH43L  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt single contact BA9 4 watt. Dimensions 9mm wide x 26mm tall with 9mm dia cap, use side light. For LED upgrade options please see part numbers B293LEDW-B and B293LEDWW-B or for brighter, multi directional light, part numbers B293LEDW-A and B293LEDWW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA15S 36 watt. Use headlamp or spotlamp. Dimensions 35mm wide x 56mm tall with 15mm dia cap. For a brighter incadescent option please see B23A. For LED options, please see BA15SLED-S30AX and BA15SLED-S30TR For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Marchal type, 12 volt double contact BA21d three pin base, 45/40 watt double filament bulb. dimensions 39mm wide x 58mm tall with 20mm cap, use headlight. discount on price for pack of 10 pieces. For a yellow version of this bulb please see B5915BY. For 6, 12 and 24V LED options, please see part numbers BA21DLED-H25YL (yellow) and BA21DLED-H30L (warm white), both with an integral lens that focus their own beam of light. For high performance LED lamps without an integral lens, please see part numbers BA21DLED-P30 (yellow) and BA21DLED-P43 (classic white) available soon.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Marchal type, 6 volt double contact BA21d three pin base, 45/40 watt double filament bulb. dimensions 39mm wide x 58mm tall with 20mm cap, use headlight. For a yellow version of this bulb please see B5912BY. For 6, 12 and 24V LED options, please see part numbers BA21DLED-H25YL (yellow) and BA21DLED-H30L (warm white) both with an integral lens that focus their own beam of light.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Bosch type, 12 volt double contact BA20d, 45/40 watt double filament bulb. dimensions 34mm wide x 64mm tall with 20mm dia cap, use headlight. For a halogen alternative, please see part number B395BH. For LED versions, please see part number BA20DLED-P43 (negative earth only) available soon, as well as BA20LED-H30L and BA20LEDH43L.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Bosch type, 12 volt double contact BA20d, 35/35 watt double filament bulb. dimensions 34mm wide x 64mm tall with 20mm diameter cap, use headlight. For brighter incandescent versions please see part numbers B396/B396B at 45/40W and BT528 at 45/40W. For a halogen upgrade, please see part number B395BH. For LED versions, please see part number BA20DLED-P43 (negative earth only) available soon, as well as BA20LED-H30L and BA20LEDH43L.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact BA15D, 32 watt single filament bulb. Dimensions 24mm wide x 48mm tall with 15mm diameter cap, use head or spot.

12volt 21watt WEDGE T10 capless CLEAR stop/flasher light bulb, dimensions 35mm tall x 15mm wide, contact wedge 9mm wide x 6.5mm deep, as used in our CA1249 Lamps. For LED options please see B501LEDW-D (comparable brightness) and B921LEDW and B921LEDW-A (both significantly brighter). An amber version of this bulb is also available, B921A-12V. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Bosch type 6 volt double contact BA20d, 35/35 watt double filament bulb. dimensions 34mm wide x 64mm tall with 20mm dia cap, use headlight.  For a brighter incandescent version, please see part number BT527 at 45/40W. For a halogen upgrade, please see part number B393BH. For LED versions, please see part number BA20DLED-P43-6N (negative earth only) available soon as well as BA20LED-H30L and BA20LEDH43L.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact BA15d, 24/24 watt double filament bulb. dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use headlight. For a brighter incandescent bulb, please see part number B170B. For brighter LED upgrade options please see part numbers BA15DLED-H30-6N (for 6V Negative Earth vehicles) and BA15DLED-H30-6P (for 6V Positive Earth vehicles) or if your lamp doesn't have a tripod arrangement or Bi-flex system, also BA15DLED-H30L and BA15DLED-H43L that both feature an integral lens that focusses the LEDs own beam, so give good results with reflectors that have deteriorated. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt festoon bulb 18 watt, 15mm x 44mm. Used as an indicator bulb. See also B266 (15W) or B1240 (21W). For LED replacement and upgrade options please see the comparable brightness B818LEDW-B and brighter B818LEDW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt miniature bayonet MCC (BA9S) 5 watt. 15mm diameter globe - dimensions 15mm wide x 28mm tall with 9mm diameter cap, side/number plate lamp. For a 9mm diameter tubular glass version of this incandescent bulb please see B989BB. For LED options, please see part numbers B989LEDW-A, B989LEDWW-A, B989LEDW-B and B989LEDWW-B.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

British Pre-focus type 12 volt single contact P38S, 48 watt Halogen single transverse filament bulb. Dimensions 27mm wide x 58mm tall with 20mm dia cap mounted on a 35mm flange, use spot lamp. Halogen upgrade for B185 (Axial filament) B323 (Transverse filament). For LED alternatives please see P36SLED-S30TR and P36LED-S43TR For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt 35 watt / 35 watt APF (American Pre Focus) base bulb, dimensions 33mm wide x 53mm tall with 15mm dia cap mounted in 30mm dia flange. For a 25/25W incandescent bulb version please see B5655. For LED options please see part numbers APFLED-H30L and APFLED-H43L. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

British Pre-focus type 6 volt single contact P36S, 36 watt single filament bulb. Dimensions 27mm wide x 58mm tall with 22mm diameter cap mounted on a 35mm flange. For LED upgrade options, please see part numbers P36SLED-S30AX and P36SLED-S43AX For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Bosch type 6 volt double contact BA20d, 25/25 watt double filament bulb. dimensions 34mm wide x 64mm tall with 20mm diameter cap, use headlight. For brighter incandescent versions please see part number B393 at 35/35W and BT527 at 45/40W. For a halogen upgrade, please see part number B393BH. For LED versions, please see part number BA20DLED-P43-6N (negative earth only) available soon as well as BA20LED-H30L and BA20LEDH43L.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact, BA15D base (equal pin) or BAY15D (offset pin) base, 21/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator where bulb space is contrained. B3212-equal: Please see part number B381 for standard (25mm) globe variant. For LED options, please see part numbers B381LEDW, B381LEDWW and B381LEDR noting these LED bulbs are larger than B3212-equal. B3212-off: Please see part number B380 for standard (25mm) globe variant. For LED options please see part numbers B380LEDW, B380LEDWW and B380LEDR. noting these LED bulbs are larger than B3212-off. Combined number plate illumination, stop and tail lamps with warm white LEDs and red LEDs are also available. For OFFSET pin - with two very bright Cree LEDS and a lens - CSTLEDWWR-12Y. Please note though that this LED option is much larger than B3212 small globe incandescent bulbs. For an EQUAL pin bulb - compact size for small lamps (e.g. part number series 288) with 6 bright red LEDs and no lens - CSTLEDWWR-12 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. -- BAY15d offset pin

12 volt double contact, BA15D base (equal pin) or BAY15D (offset pin) base, 21/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator where bulb space is contrained. B3212-equal: Please see part number B381 for standard (25mm) globe variant. For LED options, please see part numbers B381LEDW, B381LEDWW and B381LEDR noting these LED bulbs are larger than B3212-equal. B3212-off: Please see part number B380 for standard (25mm) globe variant. For LED options please see part numbers B380LEDW, B380LEDWW and B380LEDR. noting these LED bulbs are larger than B3212-off. Combined number plate illumination, stop and tail lamps with warm white LEDs and red LEDs are also available. For OFFSET pin - with two very bright Cree LEDS and a lens - CSTLEDWWR-12Y. Please note though that this LED option is much larger than B3212 small globe incandescent bulbs. For an EQUAL pin bulb - compact size for small lamps (e.g. part number series 288) with 6 bright red LEDs and no lens - CSTLEDWWR-12 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. -- BA15d base - equal pin

12 volt single contact SCC BA15s 10 watt. Dimensions 18.5mm wide x 32mm tall with 15mm diameter cap. Use side or rear. For LED upgrade options please see part number B245LEDWW or for brighter options B309ALEDW-A or B309ALEDWW-A. For a halogen upgrade option please see B245BH. For DOUBLE contact single filament 10W bulb please see B245D For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt, double contact BA15D, 48 watt, single axial or 'V' filament. Dimensions 38mm wide x 56mm tall with 15mm diameter cap. Use head or spot lamp. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BA15d 36 watt. Single Axial filament. Dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use head or spot lamp.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA9 2 watt. Dimensions 9mm wide x 26mm tall with 9mm diameter cap, use dash etc. For an LED upgrade option please see part number B288LEDW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA9s 4 watt. dimensions 9mm wide x 26mm tall with 9mm diameter cap. Use side or dash. For an LED upgrade option please see part number B233LEDWW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt festoon bulb 18 watt, 15mm x 44mm. Used as indicator bulb. For an LED upgrade option please see part number B270LEDW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BA15D 35/35 watt double filament bulb. dimensions 35mm wide x 56mm tall with 15mm dia cap. Use headlight. For a brighter incandescent option please see part number B1248. For a super high performance Halogen 60/55W option, please see part number B1248H. For BA15D LED upgrade options please see part numbers BA15DLED-H30, BA15DLED-H43, BA15DLED-H30L and BA15DLED-H43L. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA15S 5 watt. dimensions 18.5mm wide x 32mm tall with 15mm diameter cap, Ford ref 100E-13466-A . Application - dash, side, rear etc. For an LED upgrade option please see part number B245LEDWW. For a halogen upgrade option please see B207BH.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact BA15d (equal pin) or BAY15d (offset pin) base, 18/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator where bulb space is contrained. B3214-equal: Please see part number B383 for standard (25mm) globe variant. For LED options please see part numbers B383LEDW and B383LEDWW - considering any space limitations as the LED bulbs are larger. Also dual brightness red LED lamp, B383LEDR. B3214-off: Please see part number B384 for standard (25mm) globe variant. For LED options, please see B384LEDW, B384LEDWW and also red dual brightness LED B384R. Combined number plate illumination, stop and tail lamps with warm white LEDs and red LEDs are also available. For OFFSET pin - with two very bright Cree LEDS and a lens - positive and negative earth variants CSTLEDWWR-6PY and CSTLEDWWR-6NY. Please note though that this LED option is much larger than B3214 small globe incandescent bulbs. For an EQUAL pin bulb - compact size for small lamps (e.g. part number series 288) with 6 bright red LEDs and no lens - CSTLEDWWR-6 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. -- equal pin BAY15d base

6 volt double contact BA15d (equal pin) or BAY15d (offset pin) base, 18/5 watt double filament bulb. Dimensions 18mm wide x 35mm tall with 15mm diameter cap. Use side/indicator, rear/indicator where bulb space is contrained. B3214-equal: Please see part number B383 for standard (25mm) globe variant. For LED options please see part numbers B383LEDW and B383LEDWW - considering any space limitations as the LED bulbs are larger. Also dual brightness red LED lamp, B383LEDR. B3214-off: Please see part number B384 for standard (25mm) globe variant. For LED options, please see B384LEDW, B384LEDWW and also red dual brightness LED B384R. Combined number plate illumination, stop and tail lamps with warm white LEDs and red LEDs are also available. For OFFSET pin - with two very bright Cree LEDS and a lens - positive and negative earth variants CSTLEDWWR-6PY and CSTLEDWWR-6NY. Please note though that this LED option is much larger than B3214 small globe incandescent bulbs. For an EQUAL pin bulb - compact size for small lamps (e.g. part number series 288) with 6 bright red LEDs and no lens - CSTLEDWWR-6 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. -- BAY15d offset pin base

6 volt single contact BA15s 21 watt. Dimensions 24mm wide x 48mm tall with 15mm diameter cap, use brake & indicator. For LED options please see B317LEDW, also red and amber versions B317LEDR and B317LEDA For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt single contact BA9 2 watt. dimensions 9mm wide x 26mm tall with 9mm diameter cap, use dash etc. For an LED upgrade option please see part number B287LEDW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt miniature Edison screw MES E10 base 2.2 watt. Dimensions 10mm wide x 22mm tall with 9mm diameter cap, use panel/ignition. For an LED option please see B990BLEDWW.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt 21 watt festoon bulb 15mm x 44mm, use indicator. For an LED upgrade uption please see B1240LEDW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt festoon bulb 11mm x 39mm 5 watt. Use indicator or interior.  For LED upgrade bulbs please see part numbers  B253LEDW-A  and B253LEDW-E. For a much brighter LED festoon (brighter than 21W) with a 39mm fitting, please see B1240LEDW-A. Fr a 39mm festoon bulb holder please see part number FBH39 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt 3 watt festoon bulb 7.5mm x 35mm. Use indicator. For an LED upgrade please see part number B255LEDW-C For Trafficator applications (including the popular SF80/SE100 models), please also see LED lamp B255BLEDA that is very bright and also features an integral flasher unit, greatly improving visibility when indicating with a Trafficator. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact SBC BA15d 21 watt. dimensions 24mm wide x 48mm tall with 15mm diameter cap, use indicator, warning etc. For LED options please see part numbers B319LEDWW, more comparable in brightness to 18W bulbs and also directly comparable B319LEDW  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact BA15d 5 watt. dimensions 18.5mm wide x 32mm tall with 15mm diameter cap, use rear, side or dash etc. For an LED option please see B310LEDNWW, which is actually a dual brightness bulb, so the preferred brightness can be wired. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt single contact BA15s 5 watt. dimensions 18.5mm wide x 32mm tall with 15mm dia cap, use side, rear, dash etc. For an LED option, see B205LEDWW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 Volt 5 Watt capless side light bulb as used in our CA1249 lamp and in 424A conversion. For a halogen upgrade option please see B501H. For LED options please see B501LEDW-B, B501LEDW-A, B501LEDWW-A, B117LEDWW-A. An amber versions of this bulb is also available - please see part numbers  B501A and LED B501ALEDA  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt single contact SCC BA15s 10 watt. dimensions 18.5mm wide x 32mm tall with 15mm diameter cap, use rear or side.  For LED options, please see B244LEDW, B244LEDWW, B244LEDW-A and B244LEDWW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt single contact BA15S 36 watt. Dimensions 33mm wide x 50mm tall with 15mm diameter cap. Use - spot or headlight. For a 36W DOUBLE contact bulb with a single axial filament, please see B111. For brighter LED options please see BA15SLED-30TR-6N, BA15SLED-30TR-6P, BA15SLED-30AX-6N and BA15SLED-30AX-6P For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V 21W Amber Bulb single contact BA15S base for use in clear 298 and 299 lamps where required. For a clear BA15S 21W bulb please see B382 and associated upgrade options. For amber LED upgrade options please see part numbers B382LEDA and brighter still B382LEDAS.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Pre-focus type 12 volt double contact P36d, 60/50 watt Halogen twin filament headlamp bulb. Dimensions 16mm wide x 39mm tall with 20mm dia cap mounted on a 35mm flange, Halogen replacement for standard British pre-focus type bulb. For an LED alternative please see P36DLED-P43, available soon.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 Volt 21 Watt capless AMBER flasher light bulb, dimensions 37mm tall x 15mm wide, contact wedge 9mm wide x 6.5mm deep, as used in our CA1249 Lamps. For LED upgrade options, please see B921ALED and B921ALED-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.  

12 volt 10 watt festoon bulb 7.5mm x 35.5mm, use indicator. For an LED upgrade option please see part number B257LEDW. For a much brighter LED with a 36mm fitting,  please see part number B273LEDW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

6 volt double contact BA15d 35/35 watt double filament bulb. Dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use - headlight. For brighter LED upgrade options please see part numbers BA15DLED-H30-6N (for 6V Negative Earth vehicles) and BA15DLED-H30-6P (for 6V Positive Earth vehicles) or if your lamp doesn't have a tripod arrangement or Bi-flex bar system, also BA15DLED-H30L and BA15DLED-H43L that both feature an integral lens that focusses the LEDs own beam, so give good results with reflectors that have deteriorated. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. 

12 volt Liliput Edison screw LES (E5) base 1.5 watt bulb. Dimensions 5.5mm wide x 16mm tall with 5mm diameter cap, as used in our 154G indicator switch (warning light on the end of the stalk).

12 volt miniature Edison screw MES E10 2.2 watt bulb. dimensions 10mm wide x 22mm tall with 9mm dia cap, use panel/ignition. For an LED option, please see part number B987BLEDWW.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt 21 watt festoon bulb 15mm x 44mm, use indicator. For LED replacement options please see B270LEDW-A for comparable brightness and 360 degree light and B273LEDW-D for a much brighter upgrade and 180 degree light. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt 45 watt / 45 watt APF (American Pre Focus) base bulb, dimensions 33mm wide x 53mm tall with 15mm dia cap mounted in 30mm dia flange. For a 50/45W incandescent bulb version please see BA5600, for 35/30W BA5676 and for 35/35W BA5677. For LED options please see part numbers APFLED-H30, APFLED-H30L and APFLED-H43L. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

Marchal type, 12 volt single contact BA21s three pin base, 45 watt single filament bulb. dimensions 39mm wide x 58mm tall with 20mm cap, use head or spot lamp. Reference 7338. BA21S single contact 3 pin Marchal type base. Single transverse filament. For a yellow version of this bulb please see part number B5812Y. For LED options (suited to 6, 12 and 24V applications) please see part numbers - yellow - BA21SLED-H25YTR, warm white - BA21SLED-H30TR and bright white - BA21SLED-H25YTR available soon.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt single contact BA15S 21 watt. dimensions 24mm wide x 48mm tall with 15mm dia cap, use stop or flasher. For a brighter incandescent version of this bulb please see B337B. For a halogen upgrade see B382BH. For brighter LED upgrade options please see part numbers B382LEDWW and B382LEDW. The amber version of this bulb is B343 (LED versions B382LEDA and B382LEDAS). For a DOUBLE contact 21W single filament bulb please see B335 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid. 

12 volt double contact BA15D equal pin 5/21 watt. Dimensions 24mm wide x 48mm tall with 15mm diameter cap, use side/stop/flasher. See part number B3212-equal for small (19mm) globe variant for applications where space is constrained. Applications include stop & tail and side light & indicator. For LED options please see part numbers B381LEDW, B381LEDWW and B381LEDR. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BAY15d offset pins 5/21 watt. dimensions 24mm wide x 48mm tall with 15mm dia cap, use side/stop/flasher. Ford part 100E-13465-B. For LED options please see part numbers B380LEDW, B380LEDWW and B380LEDR. Combined number plate illumination, stop and tail lamps are also available: BAY15D fitting with warm white LEDs plus two very bright Cree LEDS - CSTLEDWWR-12Y BA15D fitting with warm white LEDs plus six bright red LEDS - CSTLEDWWR-12 - a very compact light, designed specifically for our 288 part number series lamps (equivalent to Lucas L582) where bulb space is limited For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BA15d 21 watt. dimensions 24mm wide x 48mm tall with 15mm diameter cap, use stop or flash. For LED options please see B335LEDW and B335LEDWW For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt SCC single contact BA15s 15 watt. Dimensions 18.5mm wide x 32mm tall with 15mm diameter cap, use stop etc. 

12 volt 3 watt festoon bulb 7.5mm x 35mm, use indicator. For a much brighter LED upgrade option with a 36mm fitting please see part number B257LEDW. For Trafficator applications including the popular SF80/SE100 unit, please also see LED lamp B256BLEDA that is very bright and also features an integral flasher unit, greatly improving visibility when indicating with a Trafficator. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BA15d 5 watt. dimensions 18.5mm wide x 32mm tall with 15mm dia cap, use side, rear, dash etc. For a halogen upgrade option see B209BH. For an LED option see B209LEDWW.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12 volt double contact BA15d 45/35 watt double filament bulb. Dimensions 35mm wide x 56mm tall with 15mm diameter cap. Use headlight. An uprated version of popular incandescent bulb B171. For a super high performance Halogen 60/55W option, please see part number B1248H. For BA15D LED upgrade options please see part numbers BA15DLED-H30, BA15DLED-H43, BA15DLED-H30L and BA15DLED-H43L. For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V Halogen bulb, rated at 50W, BA15S single contact base. Clear tubular glass 12mm diameter. Bulb height 54mm.

6v bulb rated at 36W with double contact BA15D base. 38mm globe diameter with single axial filament. For a 36W DOUBLE contact bulb with a transverse filament please see part number B3617 (B78).

12V Halogen bulb rated at 5W, single contact BA15S base. 10mm tubular glass diameter. Off Road Use Only

12 volt festoon bulb 11mm x 39mm 5 watt. Use indicator or interior. For LED upgrade options please see part number B239LEDW-A and B239LEDW-E. For even brighter LED options with a 39mm fitting, please see part numbers B273LEDW-B, B273LEDW-C and B273LEDW-E. For a 39mm festoon bulb holder, please see FBH39 For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V halogen bulb rated at 5W, BA15D double contact cap, 10mm tubular glass. Single filament.

12V Halogen bulb rated at 10W, single contact BA15S base. 10mm clear tubular glass diameter. Off Road Use Only.

12V bulb rated at 10W, double contact BA15D base. 19mm clear globe diameter. For a single contact version of this bulb see B245B. For an LED upgrade see B308LEDWW

6V Halogen bulb rated at 25/25W, twin transverse filament WITHOUT filament shield. British Pre-focus P36D base. Halogen upgrade for BPF base headlamp application. Clear glass. 

12V Halogen bulb rated at 45/40W, twin filament. British Pre-focus P36D base. Halogen upgrade for BPF base headlamp application. Clear glass. A still very bright but lower power consumption alternative to B463BH.

12V bulb rated at 23W, single contact BA15S base. 19mm (Small) globe diameter. For an LED version of this bulb please see B382LEDW

12V Halogen T15 bulb rated at 21W, BA15S single contact base, 10mm glass diameter. Single transverse filament. Off Road Use Only

6V Halogen bulb rated at 35/35W, Bosch type BA20D double contact base. Double Filament - Transverse and Axial. E marked

6V bulb rated at 45/40W. BA20D double contact base. Double filament. Clear glass 35mm diameter.

12V bulb rated at 45/40W. BA20D double contact base. Double filament. No tabs. Clear glass 35mm diameter. Narva brand.

12V Amber bulb rated at 5W, T10 wedge base W2.1 x 9.5D. Amber tubular glass 10mm diameter. E marked.

12V bulb rated at 5W, single contact BA9S base. 9mm tubular glass diameter (T8.5). 26mm bulb length.

24V bulb rated at 2.8W with MES E10 single contact screw base. 11mm clear globe diameter. (G11)

12V bulb rated at 50/45W, American Pre-focus double contact P15D 30 base. Double filament - transverse and V. 35mm glass diameter.

12V bulb rated at 35/35W, American Pre-focus double contact P15D 30 base. Double filament - transverse and V. 35mm glass diameter.

6V bulb rated at 25/25W, P15D 30 American Pre Focus double contact base. Double Filament - transverse and V. 35mm glass diameter.

12V bulb rated at 35/30W, American Pre-focus double contact P15D 30 base. Double V filament. 35mm glass diameter.

12V Yellow bulb rated at 45W, 40mm diameter yellow globe, 60mm total bulb height. BA21S single contact 3 pin Marchal type base. Single transverse filament.

12V bulb rated at 15W, BA15D Double contact base, 25mm (LARGE) globe diameter. 46mm bulb height.

12V Halogen bulb, rated at 35W, BA15S single contact base. Clear tubular glass 10mm diameter. Bulb height 54mm. ECE approved. Road legal.

12V bulb rated at 45W, BA15S Single contact base, 34mm rounded parabolic glass diameter. Single transverse filament. Head or spot lamp application.

12V bulb rated at 38W. Double contact P36D British Pre-focus base. Single transverse filament. Clear glass. For single contact, single filament bulbs please see B323B (Transverse filament) and B185 (Axial filament)

6V bulb rated at 36W, American Pre-focus single contact P15S 30 base. Single transverse filament. 35mm glass diameter. For a 12V version of this bulb, please see part number BA5678.

12V bulb rated at 42W, American Pre-focus single contact P15S 30 base. Single transverse filament. 35mm glass diameter. For a 6V version of this bulb, please see part number BA5679.

White LED number plate lens/LED light cluster module that plugs in to 211/'Duolamp' LED light clusters - 211RALED-STOP, 211RALED-RED, 211RALED and 211RA6LED, all pre-fitted with a wired tail/male connection that sockets with the female connection on this part.

Pre-focus type 12 volt double contact P36d, 50/40 watt double filament bulb, dimensions 27mm wide x 58mm tall with 22mm diameter cap mounted on a 35mm flange, Ford part ref 204E-13007-A. Use headlight. Please also see incandescent bulb option B370, LED options P36DLED-P43, P36DLED-H43L and Halogen options B414BH and B463H For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V bulb rated at 60W. Double contact P36D British Pre-Focus base. Single axial filament and clear glass. With its axial filament, high 60W output and double contacts, this British Pre-Focus bulb is perfect for traditional spot lamp applications including Lucas type SLR576 and CLR700 lights. 

6 Volt 5 Watt capless side light bulb as used in our CA1249 lamp and in 424A conversion. For an LED option of comparable brightness please see B117BLEDW, for a brighter, high specification option, please see B117LEDWW-A For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

8 x 36mm slimline, dual sided, self-flashing 12V AMBER festoon bulb featuring SIX very bright 5730 SMD LEDs. A significant improvement on standard 3W incandescent festoon bulbs to improve visibility when indicating with a trafficator. Fits a number of trafficator arms including those on the SF35 and SF40 units as well as the common SE100/SF80 unit - our part number 215. These bulbs do not fit all trafficator arms though, so please check dimensions: bulb cap 8.6mm diameter, bulb length 36mm, centre board thicknes 3mm, centre board width 14mm. No flasher relay or wiring modifcation is required - just fit in place of an ordinary festoon bulb and the bulb will flash automatically when the trafficator is activated. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Very bright AMBER colour. Trafficator Maintenance Guide

8 x 36mm slimline, dual sided, self-flashing 6V AMBER festoon bulb featuring six very bright 5730 SMD LEDs. A significant improvement on standard 3W incandescent festoon bulbs to improve visibility when indicating with a trafficator. Fits a number of trafficator arms including those fitted to the SF35 and SF40 arms as well as the common SE100/SF80 unit - part number 215. These bulbs do not fit all trafficator arms though, so please check dimensions: bulb cap 8.6mm diameter, bulb length 36mm, centre board thicknes 3mm, centre board width 14mm. No flasher relay or wiring modifcation is required - just fit in place of an ordinary festoon bulb and the bulb will flash automatically when the trafficator is activated. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. Very bright AMBER colour. Trafficator Maintenance Guide

High-quality 16 x Cree 2525 (with heatsink) BRIGHT WHITE LED upgrade for SBC BA15D headlamp bulbs from the '20s to the '50s. Flexible application - suitable 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern.  One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a number of higher-wattage 12 and 24V headlamp bulbs including B171B, B1248B and B194. In testing, this LED lamp proved significantly brighter than B1248B 45/35W. Made from aviation-grade aluminium. Please see BA15DLED-H30 for a 3000k, warmer white colour. Total bulb length 65mm, with a 12 x 25mm LED section. 15mm diameter cap. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36D base. Flexible application - suitable for 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B301 type bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. Suitable beam pattern for Tripod headlamps. This bulb is a good LED upgrade alternative to a large number of 12 and 24V bulbs including B301, B404, B332, B354, B350, B358 and B359. In testing this bulb was comparable to 12V incandescent bulb B354 (36/42W). It is not a suitable alternative to B370, B414B and B437 as they have shielded dipped beam filaments - the LED upgrade option for these bulbs is P36DLED-P43. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers P36DLED-S30-6P and P36DLED-S30-6N for 6V positive and negative earth applications. 61mm total bulb length with 12 x 25mm LED section. 22mm diameter cap with 36mm diameter plate. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus headlamp applications with the P36D base. Flexible application - suitable for 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B301 type bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems (800mA at 12V, 1.6A at 6V). 4300K bright, white colour temperature. This bulb is a good LED upgrade alternative to a large number of 12 and 24V bulbs including B301, B404, B332, B354, B350, B358 and B359. In testing this bulb was comparable with 40/45W incandescent bulbs. It is not a suitable alternative to B370, B414B and B437 as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for British Pre-focus early head and spot lamp applications with the P36D base. 6 VOLT NEGATIVE EARTH APPLICATION. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs such as B6721 type bulbs. In testing, brighter than incandescent bulb rated at 24/30W, more comparable with 36/42W. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. Suitable beam pattern for Tripod headlamps. This bulb is a good LED upgrade alternative for unshielded twin filament 6V bulbs including B6721. It is not a suitable alternative to B306 and B312B as they have shielded filaments - the LED upgrade option for these bulbs is P36DLED-P43-6. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 59mm total bulb height. 12 x 25mm LED section. P36D cap 22mm diameter with 36mm diameter plate. Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x transverse Cree 2525 (with Hotsink) LED upgrade for SINGLE CONTACT American Pre-focus head and spot lamp bulbs from the '30s and '40s with the P15S 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a great LED upgrade alternative to single contact APF incandescent bulbs - 6V, 36W part number BA5679 and 12V, 42W part number BA5678. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm SINGLE contact base with 30mm diameter pre-focus plate. For a brighter white version of this bulb please see part number APFLED-S43TR Two designs shown in photos, either design maybe supplied depending on available stock.

High quality 16 x Cree 2525 (with Hotsink) LED upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 double contact base. Extremely flexible application - suitable for 12 or 24V vehicles and compatible with either negative or positive earth systems. High and low beam - 1800 Lumen high beam, 1200 Lumen low beam - with a soft beam pattern. One row of LEDs lights up on each side of the bulb for low beam and both rows of LEDs lights up on both sides for high beam, replicating original, unshielded, twin filament bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 3000K warm, white colour temperature. This bulb is a good LED upgrade alternative to a large number of 6 and 12V bulbs from 25/25W to 45/45 including B5655, B5659B, BA5676, BA5677, B5679B and BA5600. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. 65mm total bulb height, 12 x 25mm LED section, 15mm DOUBLE contact base with 30mm diameter pre-focus plate Two designs shown in photos, either design maybe supplied depending on available stock.

Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 3000K warm white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6 and 12V bulbs from 25/25W to 45/45W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Instructions are provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb. With a bulb length of 64mm these are longer than standard APF headlamp type bulbs (at 55mm). For an LED headlamp without a lens please see part number APFLED-H30

High quality LED upgrade (with heatsink) for H4 lamps with the P43T base. Set of two H4 bulbs. Flexible application - accepts 10 to 30V input voltage so suitable for 12 or 24V vehicles. Two high power LEDs on each side provide high and low beam function - specified at over 1500 Lumen high beam and 1500 Lumen low beam giving over 3000 Lumen combined. In testing, 50% brighter on low beam and 20% brighter on high beam than B472 (60/55W) but with a classic yellow light. Very low current draw - less than 40% of 60/55w halogen bulbs, so great for low powered electrical systems (less than 2A at 12V). 3000K warm, yellow colour temperature. Plug and play upgrade for H4 bulbs - powerful, high performance lighting with reduced current consumption. Estimated lifespan significantly higher than conventional bulbs. The filament layout including low beam filament shield produces a good high and low beam pattern - with a clean cut off and dip pattern observed in testing in a variety of 5 3/4 and 7" light units. This bulb is a great LED upgrade alternative to a number of halogen bulbs including B472. Premium construction from aviation grade aluminium. Cooled by a solid heatsink - no fan, so no moving parts. These bulbs don't have an integral lens so can be used in tripod type lamps. Total bulb height including wiring/spade connections 80mm.

BAY15D fitting Combined WHITE and AMBER multi-direction, sidelight and indicator bulb. Accepts 6V and 12V input voltages with BAY15D base. 12 super bright LEDs with an integral lens. Bright white light for sidelight function, changing to very bright AMBER for indication. This bulb should function normally with your existing flasher unit, in the unlikely event of LED 'Hyper flash' an electronic flasher relay will be required of the correct polarity for your vehicle (also pin configuration, to suit your current wiring arrangement). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. 6000K bright, white colour temperature for sidelight, bright amber for the indicator. Very flexible application. A great compact and bright solution for easily converting classic sidelights to sidelight/indicator functionality. 18mm maximum diameter, 47mm total bulb height. For a warm white version of this great combination LED lamp please see part number CSILEDWWY. For Equal pin BA15D versions please see CSILEDW and CSILEDWW. Base Pin Guide

Combined WARM WHITE and AMBER multi direction, sidelight and indicator bulb. Accepts 6V and 12V input voltages. With offset pin BAY15D base. 12 super bright LEDs with integral lens. Warm white light for sidelight function, changing to bright AMBER for indication. This bulb should function normally with your existing flasher unit, in the unlikley event of LED 'Hyper flash' an electronic flasher relay will be required of the correct polarity for your vehicle (also pin configuration, to suit your current wiring arrangment). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature for sidelight, bright amber for indicator. Very Flexible application. A great compact and bright solution for easily converting classic sidelights to sidelight/indicator functionality. 18mm maximum diameter, 47mm total bulb height. For a bright white version of this great combination LED lamp please see part number CSILEDWY. For Equal pin BA15D versions please see CSILEDW and CSILEDWW.

15 x 3030 SMD LED 6V High Power lamp with integral lens. WEDGE T15 W16W type - fits the same connector as WEDGE T10, just a larger bulb. 360 degree very bright AMBER light. 6V LED option equivalent to 12V 21W bulb type B921A, though much brighter than conventional 21W bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Integral lens. Total bulb length 52mm, bulb diameter 15mm. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. For the bright white version of this bulb please see part number B921-6LEDW

Amber 15 x 3030 SMD LED 12V High Power lamp with lens. WEDGE T15 W16W type - fits the same connector as WEDGE T10, just a larger bulb. 360 degree very bright AMBER light with an integral lens to boost light output further. Much brighter in testing than amber T15 incandescent bulb B921A (21W). Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright AMBER colour temperature. Integral lens, 52mm total bulb length, 15mm head diameter. For correct indicator function an electronic flasher relay will be required of the correct polarity for your vehicle and also pin configuration, to suit your current wiring arrangement. Most commonly 12V, 3 pin, negative earth/ground LEDFLASH3. For a bright white version of this LED lamp, please see part number B921LEDW

30 x 4014 SMD LED BAY15D 12 Volt multi-directional 600 Lumen bright white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED option for B380 double filament type bulb replacement. Fitted with the common BAY15D offset pin, double contact base. Dual polarity. In testing, comparable in brightness to B380B and B3212B type 21/5W bulbs.  Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warm white option please see part number B380LEDWW, for a red LED option please see B380LEDR and for a LED option with number plate illumination and stop and tail functionality from two bright red Cree LEDs, please see CSTLEDWWR-12Y

30 x 4014 SMD LED BAY15D 6 &12 Volt multi-directional 600 Lumen warm white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED option for B380 double filament type bulb replacement. Fitted with the common BAY15D offset pin, double contact base. Dual polarity. In testing, comparable in brightness to B380B and B3212B type 21/5W bulbs.  Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a bright white option please see part number B380LEDW, for a red LED option please see B380LEDR and for a LED option with number plate illumination and stop and tail functionality from two bright red cree LEDs, please see CSTLEDWWR-12Y

30 x 4014 SMD LED BAY15D 12 Volt multi-directional 600 Lumen bright RED lamp. Combined Stop & Tail (Brake & Rear) functionality. LED option for B380 double filament type bulb functionality with the common BAY15D offset pin, double contact base. Dual polarity. RED colour great for enhancing appearance behind red lenses. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. Bright RED colour temperature. Maximum diameter 18mm, total bulb height 43mm. For an red LED option with number plate illumination and stop and tail functionality from two bright red cree LEDs, please see CSTLEDWWR-12Y

30 x 4014 SMD LED BAY15D 6 Volt multi-directional 600 Lumen bright white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED option for B384 double filament type bulb replacement, with the common BAY15D offset pin, double contact base. In testing, comparable in brightness to B384XB and B3214B type 18/5W bulbs. NEGATIVE EARTH ONLY! Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warm white option please see B384LEDWW and for red LED options please see B384LEDR and CSTLEDWWR-6NY (Neg Earth) or CSTLEDWWR-6PY (Pos Earth)

30 x 4014 SMD LED BAY15D 6 Volt multi-directional 600 Lumen warm white lamp. Combined Stop & Tail (Brake & Rear) functionality. LED option for B384 double filament type bulb with the common BAY15D offset pin, double contact base. In testing, comparable in brightness to B384XB and B3214B type 18/5W bulbs. NEGATIVE EARTH ONLY! Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. 3000K warm, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a bright white option please see B384LEDW and for red LED options please see B384LEDR and CSTLEDWWR-6NY (neg earth) or CSTLEDWWR-6PY (pos earth)

30 x 4014 SMD LED BAY15D 6 Volt multi-directional bright RED lamp. Combined Stop & Tail (Brake & Rear) functionality. RED option for B384 double filament type bulb with the common BAY15D offset pin, double contact base. RED colour is great for enhancing red colour behind red lenses. NEGATIVE EARTH ONLY! Very low current draw - over 75% less than incandescent and halogen bulbs so great for low-powered electrical systems. Bright RED colour temperature. Maximum diameter 18mm, total bulb height 43mm. Please also see part number CSTLEDWWR-6NY (Neg earth version) or CSTLEDWWR-6PY for a warm white number plate illumination, and two bright Cree LEDs for Stop and Tail function all in one bulb.

7 x 5050 SMD Warm White LED and 2 x High Power CREE LED combined Number Plate Illumination and Stop and Tail lamp. Multi direction bulb with 6 Volt application with offset pin BAY15D base and integral lens. 3000k warm white 360 degree light and bright RED colour temperature from 2 x Cree LEDs behind a lens. Red and white lights illuminate for tail light/number plate illumination function - then RED light intensifies when the brake is applied. Good contrast between red stop and tail light outputs. A great combination lamp. Compatible with NEGATIVE earth systems only. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 19mm maximum diameter, 50mm total bulb height. Please take care when fitting these bulbs - please hold by the BA15 base and the lower warm white LED board section - NOT the ribbed aluminium lens section - to avoid damage from twisting.

7 x 5050 SMD Warm White LED and 2 x High Power CREE LED combined Number Plate Illumination, Stop and Tail lamp. Multi direction bulb with 12 Volt application with offset pin BAY15D base and integral lens. 3000k warm white 360 degree light and bright RED colour temperature from 2 x Cree LEDS behind a lens. Red and white lights illuminate for tail light/number plate illumination function - then RED light intensifies when the brake is applied. Good contrast between red stop and tail light outputs. A great combination lamp. Compatible with NEGATIVE earth systems only. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 19mm maximum diameter, 50mm total bulb height. Please take care when fitting these bulbs - hold by the base and the lower warm white LED board section - NOT the ribbed aluminium lens section - to avoid damage from twisting.

12 x 3050 SMD Warm White LEDs and 6 x dual brightness 5050 LEDs for combined Number Plate Illumination, Stop and Tail lamp funtion. Multi direction bulb with 12 Volt application with equal pin BA15D base. 3000k warm white 360 degree light and bright RED colour temperature from 6 high power red LEDS. Red and white LEDs illuminate for tail light/number plate illumination functions - RED light intensifies when the brake is applied. Good contrast between red stop and tail light outputs. A great combination lamp. Accepts 9 to 50V input voltage so suitable for 12V and 24V NEGATIVE earth applications. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 18mm maximum diameter, 32mm total bulb height. The red light output is not quite as bright as the BAY15D part numbers (CSTLEDWWR-12Y, CSTLEDWWR-6NY and CSTLEDWWR-6PY) with their two cree LEDs behind a lens, but this is still a very bright, compact lamp, so a great option where space is limited. This is the ideal LED combination conversion lamp for Lucas Type L582 lamps with the BA15D fitting.

30 x 4014 SMD LED BA15D 6 Volt multi-directional bright white lamp. LED upgrade and replacement for B319B single filament type bulb with BA15D souble contact base. Comparable in brightness to 6V 21W bulbs with the benefits of LED. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Maximum diameter 18mm, total bulb height 43mm. For a warm white version please see part number B319LEDWW

9 x 5050 SMD LED BA15S 12 Volt multi-directional RED lamp. Red LED upgrade bulb. In testing much brighter than B207BR. BA15S base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. RED colour. Applications include rear lights. 37mm total bulb length, 20mm head diameter, no cover.

12 x 3014 SMD LED BA15S 6 Volt multi-directional bright white lamp. LED upgrade and replacement for B205. BA15S base. In testing, comparable in brightness to 6V incandescent bulb B205 (5W). Clear glass 19mm diameter LED cover. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. A really neat bulb for vintage and classic vehicles - LED performance with the look of a conventional bulb.

Very bright Cree LED MCC BA9S multi-directional bright white lamp. Accepts voltage input 10 to 30V. LED upgrade bulb with BA9S base - brighter than 23W incandescent bulb B419. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Applications include warning lights and indicators. Integral lens, 12.5mm head diameter, 45mm diameter overall bulb length. For an amber version of this LED bulb, please see part number B418LEDA

20 x 2835 SMD LED WEDGE T10 6 Volt multi-directional bright white lamp. Bright LED upgrade bulb with WEDGE T10 base. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 32mm total bulb length, 11mm head diameter, no cover. In testing, brighter than 10W conventional bulbs. For some 6V T10 LED alternatives please see B117LEDWW-A, B117ALEDWW and B117BLEDW

15 x 3030 SMD LED 6V High Power lamp with integral lens. WEDGE T15 W16W type - fits the same connector as WEDGE T10, just a larger bulb. 360 degree very bright white light. 6V LED equivalent to 12V bulb number B921 (21W), though much brighter than 21W bulbs in testing. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. Integral lens. 52mm total bulb length, 15mm head diameter. For the amber version of this bulb please see part number B921A-6LEDA

White 15 x 3030 SMD LED 12V High Power lamp with lens. WEDGE T15 W16W type - fits the same connector as WEDGE T10, just a larger bulb. 360 degree very bright white light with an integral lens to boost light output further. Much brighter in testing than clear T15 incandescent bulb B921 (21W). Compatible with either negative or positive earth systems. Accepts voltage input 10 to 30V. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 15mm diameter, 52mm long. For a bright amber version of this LED lamp, please see part number B921ALED

11 x 39mm 12V Festoon bulb - equivalent fitting to B239B. 360 degree/all round bright light from 12 x SMD 5050 LEDs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 11mm LED section diameter, no cover. Much brighter than 5W B239B in testing, more comparable to 8W. See also B239LEDW-E for another 39mm Festoon LED upgrade. Two designs shown in photos, either design maybe supplied depending on available stock.

15 x 39mm 6 Volt Festoon bulb - equivalent 39mm fitting to B253B but much brighter than 21W B1240B. 180 degree light from 6 x SMD 5730 LEDs. These LEDS are brighter than 5050 LEDs and hence the bulb features a finned aluminium heat sink on the rear. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. 12.5mm wide LED section. For a 42mm LED festoon upgrade option for B1240, please see part number B1240LEDW

15 x 42mm 6 Volt Festoon bulb - equivalent fitting to B618F and a good LED upgrade option for that 18W bulb, proving much brigher in testing. 180 degree light from 15 x 4014 LEDs. Compatible with either negative or positive earth systems. Input voltage 6 to 10V. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 6000K bright, white colour temperature. For a less bright LED replacement option please see part number B818LEDW-B Two designs shown in photos, either design maybe supplied depending on available stock.

8 x 5050 SMD LED BA15D 12 Volt multi-directional warm white lamp. LED upgrade and direct replacement for B245D and B308B. BA15D base. In testing, brighter than c15W incandescent bulbs. Compatible with either negative or positive earth systems. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered electrical systems. 3000K warm, white colour temperature. Applications include sidelights and repeaters, dash lights and number plate lights. 35mm total bulb length, 19mm maximum head diameter, no cover. For a brighter white alternative please see B308LEDW.

High quality 16 x Cree 2525 (with heatsink) LED upgrade for Marchal type head and spot bulbs with a SINGLE contact BA21S bulb base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems. 1800 Lumen beam, with a soft beam pattern. Two rows of transverse LEDs each side, to recreate the transverse filament arrangement of original bulbs. Very low current draw - over 75% less than incandescent and halogen bulbs so great for low powered, vintage electrical systems (800mA at 12V, 1.6A at 6V). 2500K yellow colour temperature. This bulb is a great LED upgrade alternative to a number of 6 and 12V single filament bulbs including B5812Y and BT2423. Made from aviation grade aluminium. These bulbs don't have an integral lens so can be used in tripod type lamps. Please see part numbers BA21LED-H30TR and BA21LED-H43TR for Warm White and bright White versions of this lamp. 67mm total bulb height, 12 x 25mm LED section. 21mm diameter, 3 pin bayonet cap. Two designs shown in photos, either design maybe supplied depending on available stock.

Premium high power LED lens lamp upgrade for American Pre-focus headlamp bulbs from the '30s and '40s with the P15D 30 base. Extremely flexible application - suitable for 6, 12 or 24V vehicles and compatible with either negative or positive earth systems (6 to 30V DC input, non-polarised). 4300K bright, white colour temperature. This bulb is a great LED upgrade alternative to a large number of 6 and 12V bulbs from 25/25W to 45/45W. These bulbs include a lens that is designed to focus their own beam and produce super light output with a bright main beam and well defined level dipped beam. This lens makes reflector condition less critical. Please note though, that due to the lens, this bulb cannot be used with tripod type lamps as they distrupt the carefully designed beam pattern. These bulbs draw approximately 75% less current than incandescent and halogen bulbs so are great for low powered electrical systems. Allen key is provided for aligning and adjusting the level of the beam - please take care when doing this to avoid damaging the bulb's wiring, by twisting the casting too much relative to the internal workings. With a bulb length of 64mm these are longer than standard APF headlamp type bulbs (at 55mm). For a warm white version of this lamp please see part number APFLED-H30L. For an LED headlamp without a lens,  please see part number APFLED-H30

12V bulb rated at 48W. Single contact P36S British Pre-focus base. Single axial filament. Clear glass. For a transverse filament version of this bulb please see B323 (B323B). For LED options, please see P36SLED-S30AX and P36SLED-S43AX.

6V HALOGEN bulb rated at 35/35W, twin transverse filament WITHOUT filament shield. British Pre-focus P36D base. A bright halogen upgrade for 6V British Pre-focus headlamp bulbs with twin transverse filaments. Clear glass. For 6V British Pre-focus LED alternatives please see P36DLED-S30-6N,  P36DLED-S30-6P and P36DLED-H30L

12V bulb rated at 45/40W, double filament, double contact British Pre-focus P36D base. One transverse and one hooded axial filament with filament shield. The smaller BPF bulb with 29mm diameter tubular glass and 62mm total bulb length. Please see also incandescent bulb option B414/B414B, LED options P36DLED-P43, P36DH43L and Halogen options B414BH and B463H/B463BH.  For a much larger selection of bulbs, lighting and wiring accessories, please visit our new sister website www.classicbulbs.co.uk. If you place an order on both the Classic Bulbs and Vintage Car Parts websites at the same time, we will combine your orders in processing, applying a single postage charge and refunding any duplicate charge if prepaid.

12V HALOGEN bulb rated at 5W, T10 wedge base W2.1x9.5D. Clear tubular glass 10mm diameter. E marked. For LED options please see B501LEDW-B, B501LEDW-A, B501LEDWW-A, B117LEDWW-A  

6V Yellow bulb rated at 45/40W, 40mm diameter yellow glass, 60mm total bulb height. BA21D double contact 3 pin Marchal type base. Double filament. For an LED option, please see part numbers BA21DLED-H25YL (yellow).

12V Yellow bulb rated at 45/40W, 40mm diameter yellow globe, 60mm total bulb height. BA21D double contact 3 pin Marchal type base. Double filament. For 6, 12 and 24V LED options, please see part numbers BA21DLED-H25YL (yellow, with an integral lens that focuses its own beam of light), and BA21DLED-P30 (yellow, high performance without an integral lens) available soon. 

12V bulb rated at 15W, BA15S single contact base, 19mm (Small) globe diameter. Single transverse filament. 40mm bulb height. For brighter LED upgrade options please see part numbers B309ALEDW-A and B309ALEDWW-A or B309ALEDW and B309ALEDWW. For a large globe incandescent bulb please see part number B211

12V bulb rated at 24W, single axial filament. BA15S single contact base. 38mm clear globe diameter. Please see B2A and B23A for brighter incandescent options. For a brighter Halogen options please see B796. For brighter LED options please see BA15SLED-S30AX and BA15SLED-S30TR