View Basket0 item(s) in the basket.
Orderline: +44 (0)1684 219864
£GBP
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Plastic top hat badge fixing cup, fits into 5/16" panel hole and accepts an 1/4" pin with 5/8" flange.
Chassis cable clip, simply push on to the edge of the chassis to hold cables/pipes, 40mm long 12mm wide, per packet of 10 pieces.
Steel 2BA hex nuts for tenax, lift the dot etc studs, per packet of 10.
Window channel retainer clip, ' U ' shaped clip which pushes into a 15.5mm (approx) channel, and accepts a 14mm window channel as our 488, has inner and outer gripping tangs which holds clip and channel in place. Dimensions 15.5 mm x 12.5mm x 10mm.
Moulding clip/rivet, for fixing body moulding strips to the vehicle side. Supplied with fixing rivet for 3mm hole. Will suit ford 100E with the 16mm side strips, 1956 - 61. sold each.
Moulding clip/rivet, for fixing body moulding strips to vehicle side. To fit moulding with approx 14mm gap supplied with fixing rivet for 3mm. Sold each.
Plastic top hat badge fixing cup, fits into 1/4" panel hole and accepts an 3/16" pin.
Plastic top hat badge fixing cup, fits into 7/32" panel hole and accepts an 5/32" pin.
Plastic top hat badge fixing cup, fits into 3/16" panel hole and accepts an 1/8" pin.
Arrow head spring clip, approx 17mm across base, 11mm widest point on arrow, 17mm deep, per packet of 10 pieces. Used with part 883P.
Clip "Ford type" for weatherstrip, fits into side slot. Dimensions approx 16mm long, 13mm high, gripper width max 2.5mm. Per packet of 10 pieces
Clip to fit to bottom bead of weatherstrip, and vertical edge on door panel, per packet of 10 pieces
Spring clip with 3mm gap U, for retaining headlining or weatherstrip, per packet of 10 pieces
Spring clip with 4mm gap U, for retaining headlining or weatherstrip, per packet 10 pieces
Double barbed spring clip for fitting under push on door trim. 10mm depth. To push over about 2mm panel. Per packet of 10 pieces
Slips to the rubber/sponge profile part number SR24, fits to door/door appature. Measures 13.5mm overall, suits 6mm hole
Push fit panel clip, domed head, matt black finish, all metal construction. Size measures: head 15mm diameter, length 20mm (under head) to suit 7mm hole.
Black plastic socket for fitting badges with mounting posts, fits into panel hole 4mm to take 3mm post, sold in packets of 10.
Trim panel fixing clip, rear push through clip holder only, 25mm long 12mm wide, prongs 7mm deep. Per packet of 10 pieces
'Plate fixing' clips - arrow head clips fits into front of plate which is held with spikes in rear of panel, per packet of 10 pieces, for measurements see 702 and 883P.
Spring clip - double sided S shape edge clip, per packet of 10 pieces
Edge or hole fitting panel clip, fits into a 8mm hole with 12mm reach, bottom slot with accept 3mm thick board, overall dimensions 18mm tall x 16mm wide, per packet of 10 pieces
Moulding clip/rivet, for fixing body moulding strips to vehicle side. To fit moulding with approx 9mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. Sold each.
Moulding clip, for fixing body moulding strips to the vehicle side. To fit mouldings with an approx. 11mm gap (clip measurements on larger image) supplied with fixing rivet for 3mm hole. Will suit ford 100E with the 16mm side strips, 1956 - 61, as well as other vehicles. Per packet of 10 pieces.
