Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --

Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shaft, for wrist fitting type blade. remanufactured to correct Trico pattern. adjusts from 225mm to 265mm long. alternatively we can offer all black original Trico arm, fixed length of 265mm, 1/4" shaft size. supplied straight, but stainless steel arm can easily be cranked as necessary

Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --

Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. --

Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive. -- Requires rubber peg for blade attachment - 372 or 372A

Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. --

Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. -- Blade held in place with a rubber peg (372 or 392A).

Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm. --

Chrome plated adjustable wiper arm to fit standard 13.6mm spline drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjusts from 225mm to 265mm long. Supplied straight but the stainless steel arm can be cranked if required.

Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Adaptor to enable the fitting of a spline shaft wiper arm on to a shaft. Secures with a pinch bolt. Dimensions 20mm tall with a 19mm diameter base, central bore 6mm (7/32"), 13.6mm spline.

Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required.

Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Chrome plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts, for wrist fitting type blades. Re-manufactured to correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --

Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --

Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required. --

Stainless steel wiper arm to fit 1/4" diameter shafts with a nice, substantial clamp that tightens with an allen key socket bolt. Adjustable in length 6" to 8", to fit wrist type wiper blades.

Stainless steel wiper arm to fit a 1/4" diameter shaft with a nice, substantial clamp that tightens with an allen key socket bolt. Adjustable in length 6" to 8", to fit slot type wiper blades - held in place with a rubber peg (372 or 392A).

Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm

Tandem wiper assembly, chrome of nickel plate finish, of the pre-war pattern, with the tightening nut forward (to front). Arms adjustable 125mm to 190mm in length and will fit 3/16" or 1/4" drive shaft using coned collets (supplied), link bar adjustable 350mm to 650mm. Requires slot type blade - with blade held in place by rubber peg 372 or 372A. Please select you finish from the option box below.

Slave/idle wiper arm pivot, shaft size 3/16" diameter, bolts through 8mm hole in screen, for use with centre drive dual/tandem wiper sets. Chrome plated as standard, though we also offer nickel finish if required - please select your option below. Plated two part brass and steel assembly with circlip.

Chromium plated adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm

Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Plated finish adjustable wiper arm with tightening nut forward (to front). Re-manufactured to correct Trico prewar pattern. Supplied with shaft collets for 3/16" and 1/4" drive shaft fitting. Slot blade end fitting - blades are held in place with a rubber peg (372 or 372A). In Nickel plated finish - Offered in one size, adjustable 190mm to 230mm, but can be shortened. In Chrome - offered in three lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm --

Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --

Double arm, driven at end, tandem wiper assembly. Post war pattern (tightening nut at rear (to back) offered in chrome finish only. Arms adjustable 125mm to 190mm long. Link bar adjustable from 350mm to 650mm long. Arms will fit 3/16" or 1/4" drive shaft (removeable inner sleeves/ferrules). End fitting for slot type wiper blades (e.g. 370) secured with a rubber peg (372 or 372A) to be ordered separately.

Stainless steel and chrome finished hand operated windscreen wiper arm and blade. Requires 1/4" (6mm) hole for mounting (handle detaches), 240mm long flat blade.

Stainless steel adjustable wiper arm for 1/4" diameter wiper motor shafts. This arm has a strong sping to pull the blade on to the glass. Offered with three attachment options - for slot, bayonet or wrist end type blade fittings. Adjusts from very short (approx 130mm long) to a maximum of 270mm.

Stainless steel wiper arm for spline fitting (13.00mm to 14.8mm size), adjustable in length from 170mm to 300mm long. Choice of blade end fitting - wrist OR 5.2mm or 7mm wide bayonet end (please specify). Please note that the price of wiper arms 7mm bayonet fitting is more expensive.

Triple wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable between approx 280mm to 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts, with removeable sleeves/ferrules. Slot end fitting for wiper blades (e.g. 370), secured by a rubber peg (372 or 372A). Wiper arm idle pivot (409) to be ordered separately if required.

Black painted finish adjustable wiper arm to suit 3/16" or 1/4" diameter drive shafts (removeable inner sleeve/ferrule). For slot type blades - held in place with a rubber peg (372 or 372A). Re-manufactured to the correct Trico pattern. Adjustable to the following lengths: A - short - 140mm to 190mm B - medium - 190mm to 230mm C - long - 230mm to 265mm

Stainless steel tandem wiper link bar kit, ideal for operating two wiper arms/blades if only one wheel box is powered. Existing wiper arms need to be drilled, fitting the brackets with rivets supplied. The kit comprises centre hollow tube (260mm long) with end ferrules fitted with slot headed screws, two side adjusting rods (178mm long) with drilled trunnions, two wiper arm brackets and six rivets. Adjusts between 310mm to 595mm.

Centre drive tandem wiper arm assembly. Wiper arms adjustable 125mm to 190mm long. Link bar adjustable to approx 650mm centres. Arms will suit 3/16" or 1/4" dia drive shafts (removable inner sleeves/ferrules). Slot end fittings for wiper blades (e.g. 370) secured by rubber pegs (372 or 372A). Order wiper arm slave/idle pivot (part number 409) separately if required. --